ABB DY GPS Manual de Usario

ABB No categorizado DY GPS

Lee a continuación 📖 el manual en español para ABB DY GPS (1 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/1
REFERENCE STANDARDS
Compliance with Community Directives:
2014/30/EU (EMCD)
2014/53/EU (RED)
is declared with reference to the following harmonized standards:
• EN 60950-1
• ETSI EN 301 489-1, ETSI EN 301 489-3, ETSI EN 300 440-1, ETSI EN 300 440-2
4
5
1User Manual
GPS MODULE FOR EXTERNAL USE
Read all the instructions carefully
DIMENSIONS (mm)
DEVICE STATUS
INSTALLATION
2
DY GPS
is a GPS module that allows you to capture the information of
date, time and position from satellites. This information may be shared
with DY365 device designed to interface with
DY GPS
, so as to ensure a
synchronization always perfect.
Code Model Description
2CSM250411R1000 DY GPS GPS module for external use
SAFETY WARNINGS
During product installation and operation it is necessary to observe the
following instructions:
1) The product must be installed by a qualified person, in strict compliance
with the connection diagrams.
2) Do not power the instrument if any part of it is damaged.
3) The product must be installed and activated in compliance with current
electric system standards.
4) The electrical system in the building in which the product is to be installed
should have an over-current switch and a protection device.
5) Do not use the product for purposes different from the one specified.
6) In case of malfunction do not perform repairs and contact immediately the
technical support.
7) The product can be used in environments with category of overvoltage III
and pollution degree 2.
8) Before accessing the connection terminals, verify that the leads are not live.
9) After installation, inaccessibility to the connection terminals without
appropriate tools must be guaranteed.
TECHNICAL CHARACTERISTICS
• Power supply: 12V DC (-20% ÷ +20%)
• Absorption: 30mA max (during receiving GPS)
• Wall or pole installation
• Wiring
– Cable length: 100m
– Flexible cables section: 0.75 ÷ 1.5 mm
2
– Sheathed cables maximum diameter: 3 mm
• Protection degree: IP54
• Operating temperature: 0 ÷ +50 °C
• Storage temperature: -25 ÷ +70 °C
• Operating humidity: 20÷90% non condensing
• Key to force sending data to the connected devices
• Red / green / orange led for signaling device status (Figure 1)
Led for signaling
device status
Key to force sending data
to the devices
79
52
20
41
• Installation can be wall or pole (by using the adapter in the package)
• Remove the cover by leveraging the teeth on the sides of the product
• Pass the cables through the cable entry on the bottom side and connect the
power and bus cables respecting the wiring diagram
• Tighten the cable gland and replace the cover.
• When you power on the led emits two red flashes as follows:
OFF ON OFF ON OFF
… 1 s 1 s 1 s …
After the power on sequence, the DY GPS:
- acquires data of time, date, latitude, longitude and number of satellites received
about every 30 seconds
- sends data of time, date, latitude, longitude to the I/O extension port (and to the
connected devices) every 30 minutes
The flashing of the green led indicates the number of the received satellites
(the higher the number of satellites received, the better the reception of the
information):
Number of satellites Green led sequence
ON OFF REPETITIONS
0 - 2 500 ms 500 ms continuous
3 – 5 100 ms 300 ms 3 every 5 seconds
6 – 8 100 ms 300 ms 6 every 5 seconds
9 – 12 100 ms 300 ms 9 every 5 seconds
• Sending data to the I/O extension port (and to the connected devices) is signaled
by the red flashing of the led for 3 seconds as follows:
ON OFF ON OFF …..
100 ms 100 ms 100 ms 100 ms …..
Note: at any time you can force sending data to the I/O extension port by pressing
the key (accessible by removing the cover, see figure 2).
• Failure to receive the correct data for more than 60 seconds causes an auto-reset
of the device. After three fruitless recovery attempts, this condition is signaled by
the red flashing of the led as follows:
ON OFF ON OFF …..
500 ms 500 ms 500 ms 500 ms …..
In this case, the DY GPS tries to restore the operation of the GPS module by
continuing signaling; in case it succeeds, it will return to normal operation (flashing
of the led of green colour according to the number of the detected satellites).
• Failure to receive the correct data for more than 30 minutes causes an auto-
reset of the device with loading of factory settings and subsequent restart. This
condition is signaled by the orange flashing of the led for 3 seconds as follows:
ON OFF ON OFF …..
300 ms 300 ms 300 ms 300 ms …..
3CONNECTION DIAGRAMS
I/O extension
port
Figure 1 Figure 2
DY GPS
2CSM441046D0201
ABB S.p.A
V.le dell’Industria 18
20010 Vittuone (MI) - Italy
Tel. +39 02 2415 0000
https://new.abb.com/low-voltage
© Copyright 2019 ABB S.P.A . All rights reserved.
We reserve the right to make technical changes or modify
the contents of this document without prior notice.
Installation Manual

Especificaciones del producto

Marca: ABB
Categoría: No categorizado
Modelo: DY GPS

¿Necesitas ayuda?

Si necesitas ayuda con ABB DY GPS haz una pregunta a continuación y otros usuarios te responderán


No categorizado ABB Manuales

ABB

ABB DW1 Manual de Usario

6 Octubre 2024
ABB

ABB FW/S 8.2.1 Manual de Usario

18 Septiembre 2024
ABB

ABB DWTL1 Manual de Usario

21 Agosto 2024
ABB

ABB D2 Plus Manual de Usario

13 Agosto 2024
ABB

ABB VAA/S6.230.2.1 Manual de Usario

12 Agosto 2024
ABB

ABB AW1CO-R-210m Manual de Usario

11 Agosto 2024
ABB

ABB DY GPS Manual de Usario

10 Agosto 2024
ABB

ABB HA-M-0.12.1 Manual de Usario

5 Agosto 2024
ABB

ABB AF96-30-00-41 Manual de Usario

3 Agosto 2024
ABB

ABB DY365 Manual de Usario

28 Julio 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024