Accucold ACR45LCALSTO Manual de Usario

Accucold Refrigerador ACR45LCALSTO

Lee a continuación 📖 el manual en español para Accucold ACR45LCALSTO (40 páginas) en la categoría Refrigerador. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/40
FROST-FREE
REFRIGERATOR and FREEZER
RÉFRIGÉRATEUR et CONGÉLATEUR SANS GIVRE
MODEL MODÈLES S/
Refrigerator/Réfrigérateur ACR45L / ACR46GL :
Freezer/ Congélateur ACF33L :
INSTRUCTION MANUAL/ INSTRUCTION MANUEL D’
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
AVANT L'UTILISATION, VEUILLEZ LIRE ET SUIVRE TOUTES LES RÈGLES DE SÉCURITÉ ET LES
INSTRUCTIONS D'UTILISATION.
Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.summitappliance.com
Write Model and Serial Nos. (on lower left
corner of inside cabinet) here:
Model/Modèle: ____________________
Serial/S : ______________________ érie
2
TABLE OF CONTENTS
Appliance Safety 3
Important Safeguards 3-4
Location of Parts 5-6
Installation Instructions 7-9
Before Using your Appliance 7
Installation of your Appliance 7
Electrical Connection 7-8
Extension Cord 8
Reversing the Door Swing of your Appliance 8
Installing the Stainless Steel Hand 9 le
Operating your Appliance 9-13
Control Panel for ACR45L/ACR46GL 9- 10
Control Panel for ACF33L - 10 11
Temperature Memory Function 11
Defrosting 11
Using the Freezer ACF33L 11
Door Alarm 12
Door Lock 12
elves Sh 12
Thermometer/Alarm - 12 13
Care and Maintenance - 14 15
Cleaning your Appliance 14
Power Failure 14
Vacations 14
Moving your Appliance 14
Energy-Saving Tips 15
How to Remove the Thermometer/Alarm 15
Troubleshooting -17 16
Limited Warranty 19
French Version of this User Manual - 20 40
3
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read
and obey all safety messages.
This is the Safety Alert Symbol. The symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety
Alert Symbol and either the wo DANGER WARNING. rd or
DANGER means that failure to heed this safety
statement may result in severe personal injury or
death.
WARNING means that failure to heed this safety
statement may result in extensive product
damage, serious personal injury, or death.
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let you know what can happen if the instructions are not followed.
IMPORTANT SAFEGUARDS
Before the appliance is used, it must be properly positioned and installed as
described in this manual so read the manual carefully. To reduce the risk of re, ,
electrical shock or injury when using the appliance, follow basic precautions ,
including the following:
• Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do
not use an extension cord.
• Replace all panels before operating.
• is recommended that a separate circuit serving only your appliance be provided. Use receptacles It
that cannot be turned o by a switch or pull chain.
• Never clean appliance parts with ammable uids. These fumes can create a re hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a re hazard or explosion.
• not connect or disconnect the electric plug when your hands are wet. Do
• Unplug the appliance or disconnect power before cleaning or servicing. Failure to do so can result in
electrical shock or death.
• not attempt to repair or replace any part of your appliance unless it is specically recommended in Do
this ma . All other servicing should be referred to a qualied technician. nual
• This appliance is CFC- and HFC-free and contains small quantities of Isobutane (R600a) which is
environmentally friendly, but ammable. It does not damage the ozone layer, nor does it increase the
greenhouse eect. re must be taken during transportation and setting up of the appliance that no Ca
parts of the cooling system are damaged. Leaking coolant can ignite and may damage the eyes.
4
• In the event of any damage:
o Avoid open flames and anything that creates a spark,
o Disconnect from the power supply,
o Air the room in which the appliance is located for several minutes, and
o Contact the Service Department for advice.
• The more coolant there is in an appliance, the larger the room it should be installed in. In the event of
a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For
every ounce of coolant at least 325 cubic feet room space is required. The amount of coolant in the of
appliance is stated on the data plate inside the appliance It is hazardous for anyone other than an .
Authorized Service Person to carry out servicing or repairs to this appliance.
• Take serious care when handling, moving and using e appliance to avoid either damaging the th
refrigerant tubing or increasing the risk of a leak.
• Replacing component parts and servicing shall be done by factory authorized service personnel, so as
to minimize the risk of possible ignition due to incorrect parts or improper service.
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
• Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
• To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above °F ( °C) and below °F ( °C).60 16 90 32
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with state
and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance
with the National Electrical Code and local codes and ordinances, is required.
• Do not kink or pinch the power supply cord of appliance.the
• The size of the fuse (or circuit breaker) should be 15 amperes.
• It that is important the appliance be leveled in order to work properly. You may need to make several
adjustments to level it.
• All installations must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched, kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or
discolor the interior.
• Use this appliance only for its intended purpose as described in this .Instruction Manual
• Keep fingers out of the “pinch point areas. Clearances between the door and cabinet are necessarily ”
small. Be careful closing the door when children are in the area.
Risk of child entrapment!
Child entrapment and suocation are not problems of the past. Junked or abandoned appliances are
still dangerous, even if they will “just sit a few days”.f or
Before discarding your old refrigerator:
• Take o the doors
• Leave the shelves in place so that children may not easily climb inside.
- SAVE THESE INSTRUCTIONS -
5
LOCATION OF PARTS
MODEL ACR45L FROST-FREE REFRIGERATOR –
Security Lock
Door
Handle
LED Light
Adjustable LegsVentilation Grille
Center Shelf
Digital Control Panel Thermometer/Alarm
Shelves (2)
MODEL ACF33L FROST-FREE FREEZER –
Security Lock
Door
Handle
LED Light
Adjustable LegsVentilation Grille
Center Shelf
Digital Control Panel Thermometer/Alarm
Shelves (2)
6
MODEL ACR46GL FROST-FREE REFRIGERATOR –
Security Lock
Door
Handle
Adjustable Legs
Thermometer/Alarm
LED Light
Ventilation Grille
Center Shelf
Digital Control Panel
Shelves (2)
7
INSTALLATION INSTRUCTIONS
Before Using your Appliance
• Remove the exterior and interior packing.
• fore connecting the appliance to the power source, let it stand upright for approximately 2 hours. Be
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the door, if it is not already attached. (See page 8 .)
Installation of your Appliance
• The appliance is designed for built-in or recessed or free standing installation for indoor use only.
• Place your appliance on a oor that is strong enough to support it when it is fully loaded. To level the
unit, adjust the front leveling legs.
• For free standing installation, 5 (127mm) of space between the back and sides of the unit, ” and 4”
(102mm) at the top, are suggested, which allows the proper air circulation to cool the compressor and
condenser. Even for built-in installation, it is a must to keep ¼” (6.35mm) space on each side and at
the top rear. Take care that the air vent at the front of the appliance never and 2” (51mm) at the is
covered or blocked in any way.
NOTE: It is recommended that you do not install the appliance near an oven, radiator or other heating
source. Direct sunlight may aect the acrylic coating and heat sources may increase electrical
consumption. Don’t install in a location where the temperature will fall below °F ( °C). For 60 16
best performance, do not install the appliance behind a cabinet door or block the base grille.
• Avoid locating the unit in moist areas.
• Plug the appliance to an exclusive, properly grounded wall outlet. in
Electrical Connection
This appliance should be properly grounded for your safety. The power cord of this appliance is equipped
with a three-prong plug which mates with standard three-prong wall outlets to minimize the possibility of
electrical shock.
Do not under any circumstances cut or remove the third (ground) prong from the power cord supplied. For
personal safety, this appliance must be properly grounded. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an authorized service center.
This appliance requires a standard 115/120 Volt AC ~60Hz three-prong grounded electrical outlet. Have
the wall outlet and circuit checked by a qualied electrician to make sure the outlet is properly grounded.
When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or
dangling.
WARNING
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a qualied electrician or an authorized service center.
8
The appliance should always be plugged into its own individual electrical outlet which has a voltage rating
that matches the rating label on the appliance. This provides the best performance and also prevents
overloading house wiring circuits that could cause a re hazard from overheating.
Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out on
from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When
moving the appliance, be careful not to damage the power cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended that you do not
use an extension cord with this appliance. However, if you must use an extension cord, it is absolutely
necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes.
Reversing the Door Swing of your Appliance
This unit has the capability of the door opening from either the left or right side. The unit is delivered to
you with the door opening from the left side. Should you desire to reverse the opening direction, please
follow the reversal instructions shown below.
NOTE: All parts removed must be saved to allow the door swing to be reversed.
1. door Remove the bottom hinge (2) by unscrewing the four lock screws (1).Be careful to hold the rmly
after removing the screws. (Fig. 1)
2. Gently pull down to remove the door from the right top hinge and place it on a padded surface to
avoid the risk of damage. Then unscrew (3) and transfer the bottom hinge sleeve (4) to the opposite
side. (Figs. 1 & 4)
3. Unscrew and transfer the top hinge pin (5) to the opposite side. (Fig. 2)
4. Unscrew (7) and transfer the bottom hinge pin (6) to the opposite side of the bottom hinge (2) (Fig. 3)
.
5. Relocate the door to the designated position. Then screw the bottom hinge on the left designated
position and tighten after the door is leveled. (Fig. 4) it
6. Remove the handle from the left side of the door and install it on the right side. ( See next section.)
9
Installing the Handle
This appliance includes a handle that is not required to operate the unit. To
install the handle, follow the instructions below:
1. e a screwdriver to remove the screws on the side of door where the Us
handle is to be installed.
2. Align the handle with the screws removed in step # 1. Tighten the screws
using a Phillips head screwdriver until the handle is both ush and secured
tightly against the door . (DO NOT over-tighten as this will cause side
damage to the door surface .)
OPERATING YOUR APPLIANCE
It is recommended you install the appliance in a place where the ambient temperature is between and 72º
78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be aected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to uctuate. The operating temperature range may not be
reached.
Control Panel for ACR45L / ACR46GL
ON/OFF Power
• To turn e appliance o, press and hold the key for 5 seconds until the temperature display goes th
o. To turn e appliance on, press and hold the key for 1 second until the temperature display th
lights up.
NOTE: Pressing the POWER key once can switch o the audible alarm when the alarm is on.
UP
• Used to increase (warm) the set temperature by 1°C ºF. /1
DOWN
• Used to decrease (cool) the set temperature by 1°C ºF. /1
ºF ºC/ Selector
• Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the key for 5 seconds. LIGHT

Especificaciones del producto

Marca: Accucold
Categoría: Refrigerador
Modelo: ACR45LCALSTO

¿Necesitas ayuda?

Si necesitas ayuda con Accucold ACR45LCALSTO haz una pregunta a continuación y otros usuarios te responderán


Refrigerador Accucold Manuales

Accucold

Accucold AL752BKBISSHH Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBISSHVADA Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBISSHHADA Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBISSHV Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBISSHH Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBIIF Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBIIFADA Manual de Usario

29 Septiembre 2024
Accucold

Accucold AGP34RFLCAL Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWBI Manual de Usario

29 Septiembre 2024
Accucold

Accucold CT66LWADA Manual de Usario

29 Septiembre 2024

Refrigerador Manuales

Últimos Refrigerador Manuales

GE

GE Profile Performance TPX24PBDCC Manual de Usario

27 Octubre 2024
Kenmore

Kenmore 795.74019 Manual de Usario

27 Octubre 2024
Kolpak

Kolpak Polar Pak QS6-068-CT Manual de Usario

27 Octubre 2024
Hotpoint

Hotpoint LH8 FF2I X Manual de Usario

27 Octubre 2024
Amana

Amana SX522 Manual de Usario

27 Octubre 2024
LG

LG GMB844PZFG Manual de Usario

27 Octubre 2024
Scancool

Scancool SFS170 Manual de Usario

27 Octubre 2024
Hoover

Hoover HCA 390 FFK Manual de Usario

27 Octubre 2024
Junker

Junker JC30GCSE0 Manual de Usario

27 Octubre 2024
Orima

Orima ORS 457 NF X Manual de Usario

27 Octubre 2024