Accucold AFZ1PVDL2BLHD Manual de Usario

Accucold congelador AFZ1PVDL2BLHD

Lee a continuación 📖 el manual en español para Accucold AFZ1PVDL2BLHD (44 páginas) en la categoría congelador. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/44
Model:
Serial No.:
Write Model and Serial Numbers
here:
MEDICAL FREEZERS
Models
AFZ2PVBIADA
AFZ5PVBIADA
AFZ7PV
AFZ14PV
AFZ17PV
AFZ19PV
User Manual
BEFORE AND USE, PLEASE READ FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS
Accucold Division of Felix Storch, Inc.
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, NY 10474
www.accucold.com
2
EQUIPMENT SAFETY
Your safety and safety the of others are very important.
We have provided many important safety messages in this manual and on your unit. Always read and
obey all safety messages.
This is Alert the Safety Symbol. The symbol alerts you to potential hazards that
can or injure you and others. safety messages kill All will follow the Safety
Alert Symbol and the words either "DANGER" or "WARNING".
DANGER means that failure to heed this safety
statement may result severe personal injury or in
death.
WARNING means that failure to heed safety this
statement may result in extensive product
damage, serious personal injury, or death.
WARNING: Low temperature/freezing conditions, frostbite HAZARD
WARNING: flammable material
All safety messages will alert you about the potential hazard, tell you how to reduce the chance of injury,
and let happen if you know what can the instructions are not followed.
EQUIPMENT SAFETY
Before the equipment is used, it must be properly positioned and installed as
described manual, in this so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using this equipment, follow basic precautions,
including the following:
Plug into a grounded 3 prong outlet, do not remove grounding prong, do not use an adapter, and do-
not use extension cord. an
Replace operating. all panels before
It is recommended that separate your unit a circuit serving only be provided. Use receptacles that
cannot be turned off by a switch or pull chain.
Never clean the equipment parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this a or any other pieces of equipment. The fumes can create fire hazard or explosion.
Before proceeding and make with cleaning maintenance operations, sure power of the the line unit is
3
disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug or disconnect power servicing. the unit before cleaning or Failure to do so can result in
electrical shock or death.
Do not attempt to repair part of or replace any your unless recommended unit it is specifically in this
manual. All other servicing a should be referred to qualified technician.
These units are CFC free and contain a small quantity of propane (R290).- and HFC- They are
environmentally friendly, but flammable. They do not damage the ozone layer, nor do they increase
the greenhouse effect. Care must be taken during transportation and setting up of a unit that no parts
of cooling are damaged. Leaking coolant can ignite and may damage the system the eyes.
In the event of any damage:
-
Avoid a open flames and anything that creates spark,
-
Disconnect the electrical power from line,
-
Air which unit isolated the room in the for several minutes, and
-
Contact Department for advice. the Service
The more coolant there is in a unit, the larger the room it should be installed in. In the event of a
leakage, small room, there of combustible gases building up. For every a if the unit is in is the danger
ounce of coolant, at least 325 cubic feet of room space is required. The amount of coolant in the unit
is stated on the data plate inside the unit. It is hazardous for anyone other than an Authorized Service
Person out to carry servicing or repairs to this piece of equipment.
Take serious care when handling, moving, and using the unit to avoid either damaging the refrigerant
tubing or increasing the a risk of leak.
Replacing component parts and servicing shall be done - by factory authorized service personnel as so
to minimize the risk of possible ignition due to incorrect parts or improper service.
FOLLOW WARNING CALLOUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use . two or more people to move and install unit Failure to do so can result in back or other injury.
To ensure proper ventilation for your , the front of the unit must be completely unobstructed.unit
Choose a well ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). [For-
optimal performance, install the unit where the ambient temperature is between72º and 78ºF (23º-
26ºC).] must This unit be installed in an area protected from elements, the such as wind, rain, water
spray or drips.
The should not be located next or other sources unit to ovens, grills of high heat.
The installed water and drain connections accordance state and unit must be with all electrical, in with
local codes. A standard electrical supply ( V AC only, 60 Hz), properly grounded in accordance 110
with the Code and National Electrical local ordinances, required. codes and is
Do not kink the power supply cord of the or pinch unit.
The size of the fuse (or circuit breaker) should be 15 amperes.
It is important that the equipment order be leveled in to work properly. may need make several You to
adjustments to level it.
All installations must be in accordance with local plumbing code requirements.
Make certain pipes are not pinched, that the kinked or damaged during installation.
Check for leaks after connection.
Never allow children operate, or the use to play with crawl inside unit. Medical device, only professional .
Do - not use solvent based cleaning agents or abrasives on the interior. These cleaners may damage
or discolor the interior.
Use . this equipment only for its intended purpose as described in this Instruction Manual
Keep fingers out of the “pinch point” areas. Clearances between the door and cabinet are necessarily
small. careful Be closing the door when children are in the area.
Ensure all ventilation openings are not obstructed.
Do not use mechanical devices or other to accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.

Especificaciones del producto

Marca: Accucold
Categoría: congelador
Modelo: AFZ1PVDL2BLHD

¿Necesitas ayuda?

Si necesitas ayuda con Accucold AFZ1PVDL2BLHD haz una pregunta a continuación y otros usuarios te responderán




congelador Accucold Manuales

congelador Manuales

Últimos congelador Manuales