Adastra 952.619UK Manual de Usario

Adastra Vocero 952.619UK

Lee a continuación 📖 el manual en español para Adastra 952.619UK (2 páginas) en la categoría Vocero. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
BHV SERIES
Background Speakers
User Manual
Introduction
Thank you for choosing the Adastra BHV series speakers for your sound installation.
These durable cabinets deliver reliable, high quality sound output for music and
announcements. Please read the following guidance notes for correct installation.
Contents
BH series background speaker
2 x cross-head screws
Steel speaker bracket
2 x speaker screw caps
Plastic wall plate
Specifications
White stock ref.
952.612 UK
952.614 UK
952.616UK
952.618UK
Black stock ref.
952.613 UK
952.615 UK
952.617UK
952.619UK
Model
BH4V
BH5V
BH6V
BH8V
Impedance
IP rating
Dispersion
100V tappings
2.5 5 20W , , , 10
5 , 30W , , 10 20
10, , , 20 30 40W
20, 30, 40, 50W
Power max
60W
100W
140W
160W
Power rms
30W
50W
70W
80W
Freq. response
100Hz - 20kHz
80Hz - 20kHz
50Hz - 20kHz
30Hz - 20kHz
LF driver
100mmØ (4“)
135mmØ (5.25")
165mmØ (6.5")
200mmØ (8")
HF driver
13mmØ (0.5“)
13mmØ (0.5“)
25mmØ (1")
25mmØ (1")
Sensitivity
88 dB
89 dB
90dB
90dB
Dimensions
195*127*126mm
25 635*1 *1 60mm
2 *1 *190 90 95 mm
378*244*240mm
Weight
1.63kg
2.38kg
3.28kg
4.82 kg
BHV Series User Manual
Installation
1. Unscrew the plastic wall plate from the speaker bracket and mark
out, drill and fix to the wall as required.
2. Line up the steel speaker bracket against the plastic wall plate at
the required tilt angle and secure using the 2 screws provided
through 2 of the punched holes.
3. Locate the speaker into the speaker bracket and secure using the
screw caps provided on the top and bottom. (Do not over-tighten)
4. Adjust the horizontal angle (pan) of the speaker by loosening the screw caps, turning the
speaker and re-tightening the screw caps.
5. Remove the cover on the rear of each speaker to reveal the spring terminals.
6. If the amplifier is 100V type, select the required wattage
output on the rotary switch inside the rear speaker
compartment.
7. If the amplifier is
not
a 100V type, ensure that the total
speaker load on each output is no lower tha that stated n
for the amplifier.
Select the 16 tion on the rotary switch and connect op
1 x V speaker for a 16 load, BH
2 x BHV speakers in parallel for an 8 load or
4 x BHV speakers in parallel for a 4 load.
8. Use good quality 2-core speaker wire capable of carrying the rated power and connect to
the speaker terminals. Strip back the insulation, press down the terminal, thread the wire
through the terminal post and release to grip the bare wire.
9. If installing in sheltered outdoor areas, fit the cover over the rear terminal cavity to protect
the wiring from moisture.
10.
Connect the + and - terminals on the speaker to the relative outputs on the amplifier.
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as
Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2021.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

Especificaciones del producto

Marca: Adastra
Categoría: Vocero
Modelo: 952.619UK

¿Necesitas ayuda?

Si necesitas ayuda con Adastra 952.619UK haz una pregunta a continuación y otros usuarios te responderán




Vocero Adastra Manuales

Vocero Manuales

Últimos Vocero Manuales