Adastra BC4V Manual de Usario

Adastra Vocero BC4V

Lee a continuación 📖 el manual en español para Adastra BC4V (4 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

BCV-SERIES

100V Indoor Speakers

User Manual

BC3V

75mm (3”), 60Wmax

White

952.710

Black

952.711

BC4V

100mm (4”), 70Wmax

White

952.712

Black

952.713

BC5V

130mm (5.25”), 90Wmax

White

952.714

Black

952.715

BC6V

165mm (6.5”), 120Wmax

White

952.716

Black

952.717

Introduction

Thank you for choosing the BC-series indoor speakers. These speakers have been designed to offer high

quality sound for low impedance installations. Please read and follow the

instructions in this manual to achieve the best results and avoid damage through

misuse.

Installation

The BC-series speakers are each supplied with a wall-mounting bracket which

allows 90° lateral adjustment. When fixing to a wall or ceiling, use the bracket to

mark out the fixing points and use appropriate fixings for the substrate that the

speaker will be attached to, ensuring that the fixing is strong enough to bear the weight.

Once the bracket is fitted, support the speaker in position and attach top and bottom using the supplied

screw ca and adjust to the required angle. Further mounting points are available at the rear of the ps

speaker, should it be preferred to use different mounting methods (e.g. 129.130 129.124UK) –

Note: Do not over-tighten the screw caps as this can cause the threaded inserts to fail.

BCV-series User Manual

Connection

BCV-series speakers are connected via 2 spring terminals at the rear of the

enclosure. For 100V operation, use double insulated cable rated to the total

maximum current, calculated as total max tapped power divided by 100V.

With the amplifier switched off, strip the speaker wire ends and connect

100V wire to the red terminal and connect Common - to the or “+” or “ ”

black terminal. Each model has a 100V transformer built in with various

volume settings or “tappings” available via a rotary switch at the rear

(BC6V example shown) .

When used with a 100V line amplifier, select the required maximum

wattage that the speaker should demand from the amplifier. Ensure that

the sum of the wattages of all the speakers attached to the amplifier does

not exceed the recommended output of the amplifier.

When used with a standard (non-100V) amplifier, select the “8Ω” setting and refer to the amplifier

manufacturer’s manual to ensure that total speaker impedance (Ω) is not less than recommended for the

amplifier. It is imperative that the amplifier does not deliver more power than can be handled by the BCV

speaker. Refer to the amplifier manual and specifications below to calculate this. Normally, it is

recommended that the amplifier is capable of the RMS power rating of the speaker but cannot ever

exceed the Max power rating.

Specifications

Model

BC3V

BC4V

BC5V

BC6V

Woofer

75mmØ (3“)

100mmØ (4”)

130mmØ (5.25”)

165mmØ (6.5”)

Tweeter

50mmØ (2“)

25mmØ (1”)

Freq sponse re

120Hz - 20kHz

110Hz - 20kHz

100Hz - 20kHz

90Hz - 20kHz

Power max : 8 Ω

60W

70W

90W

120W

Power rms : 8Ω

30W

35W

45W

60W

Tappings

1.5/3/ 6W, 8Ω

2.5/5/10/ 20W, 8Ω

5/10/20/ 30W, 8Ω

5/10 20 40W/ / , 8Ω

Dimensions (mm)

106 x 153 x 106

150 x 195 x 150

180 x 240 x 180

220 x 280 x 220

Weight

900g

1.63kg

2.38kg

3.08kg

SPL @ 1W/1m

88dB

89dB

Caution

The BCV-series speakers are intended for indoor use. Avoid moist or dusty environments.

Avoid excess heat and exposure to direct sunlight.

Take care not to overload speakers. HF drivers are especially prone to damage through overload.

For 100V installation, take proper care to insulate any contacts within reach of users.

BCV-series User Manual

Especificaciones del producto

Marca:	Adastra
Categoría:	Vocero
Modelo:	BC4V
Ancho:	244 mm
Profundidad:	244 mm
Manual de usuario:	Ja
red LAN:	Ja
Resolución Máxima:	4096 x 2160 Pixels
Tipo de fuente de energía:	ATX
Cables suministrados:	SATA
Número de puertos USB 2.0:	2
Puerto(s) VGA (D-Sub):	1
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
Certificación:	FCC, CE, WHQL, ErP/EuP
HDCP:	Ja
Puertos DVI-D:	1
Software incluido:	ASRock APP Charger\nASRock XFast LAN\nASRock EZ Mode\nASRock Full HD UEFI\nASRock My Favorites in UEFI\nASRock Instant Flash\nASRock Internet Flash\nASRock Crashless BIOS\nASRock UEFI Tech Service
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	3
Zócalo del procesador:	LGA 1151 (Socket H4)
Fabricante del procesador:	Intel
Memoria interna máxima:	64 GB
Tecnología Intel® Turbo Boost:	2.0
Tecnología de vídeo Intel® Quick Sync:	Ja
Tecnología Intel® InTru™ 3D:	Ja
Intel® Insider™:	Ja
Tecnología Intel® Clear Video:	Ja
Canales de salida de audio:	7.1 kanalen
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo C:	1
Guía de Instalación Rápida:	Ja
ETC:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet
placa base con chipset:	Intel® B250
Módulo de plataforma confiable (TPM):	Ja
Tipo de ranura de memoria:	DIMM
chip de audio:	Realtek ALC892
Controladores suministrados:	Ja
Tipo de enfriamiento:	Passief
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x16 (Gen. 3.x):	2
Ranuras PCI Express x1 (Gen 3.x):	1
Preparada para la memoria Intel® Optane™:	Ja
Puerto(s) PS/2:	2
Componente para:	PC
Controlador LAN:	Intel® I219
Versión de DirectX:	12.0
Número de conectores SATA III:	6
No ECC:	Ja
Activación de la LAN:	Ja
Ranuras PCI:	1
Procesadores compatibles:	Intel Celeron, Intel Pentium
Tipos de memoria soportados:	DDR4-SDRAM
Máx. número de procesadores SMP:	1
Código del Sistema Armonizado (SA):	84733020
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	micro ATX
Número de ranuras de memoria:	4
Velocidades de reloj de memoria admitidas:	2133,2400 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	128 Mbit
Versión ACPI:	6.0
Soporte para procesamiento paralelo:	2-Way CrossFireX, 4-Way CrossFireX
Conexión para refrigerador de CPU:	Ja
Conexiones para ventiladores de caja:	2
Conector de alimentación ATX (24 pines):	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
monitor de salud de la computadora:	CPU, FAN, Temperature, Voltage
Memoria sin búfer:	Ja
Conexiones USB 3.2 Gen 1 (3.1 Gen 1):	1
Conector TPM:	Ja
Conexión de intrusión al chasis:	Ja
Conector de alimentación EPS (8 pines):	Ja
Serie Intel® Core i3/i5/i7/i9:	i3-6xxx, i5-6xxx, i7-6xxx
Soporte de gráficos discretos:	Ja
Capacidades de módulos de memoria admitidas:	4GB, 8GB, 16GB
Perfil de memoria Intel® Extreme (XMP):	Ja
Número de ranuras M.2 (M):	2
Incluye utilidades:	Ja