ADATA FALCON Manual de Usario

ADATA Unidades de estado sólido (ssd) FALCON

Lee a continuación 📖 el manual en español para ADATA FALCON (4 páginas) en la categoría Unidades de estado sólido (ssd). Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

INSTALLING A M.2 SSD

ON A LAPTOP PC

BEFORE INSTALLATION

1. GATHER THE THINGS YOU'LL

NEED

*Please use a standard Phillips screwdriver (3.5mm) for

disassembling the case; and a smaller Phillips

screwdriver for installing the M.2 solid state drive as it

uses screws with a diameter of 1.85-1.98mm.

PC, Phillips screwdrivers, and ADATA M.2 SSD

2. BACK UP YOUR DATA

Make sure to backup the important data on

your PC to an external device, such as an

external HDD, before starting installation.

3. POWER OFF YOUR PC

After backing up your data, power off your PC

to avoid data loss or damage to other

components during installation.

4. UNPLUG POWER CORD AND

BATTERY

*The battery removal step applies only to laptops when

it's possible to remove the battery. To see how to

remove the battery, refer to your user manual.

This action is necessary to discharge residual

power that can damage your PC and its

components.

*If you are unsure how to do this, refer to your user

manual

*The location of slots may vary by PC. Please check

your PC's user manual for more information.

**Generally speaking, the screws that secure the SSD in

place will be installed on the motherboard when the

laptop is shipped from the factory.

*The slot has a foolproof design. Please insert the SSD

in the direction corresponding to the pins on the solid

state drive and the slot. Do not insert it forcibly to avoid

damage to the product.

INSTALLATION

Use your standard Phillips screwdriver to

remove the screws from the back plate.

2. LOCATE THE M.2 PCIE SLOT AND

CONFIRM THERE ARE SCREWS

Locate the M.2 PCIe slot, ensure the SSD will fit

and confirm there are screws present.

3. ALIGN THE M.2 SLOT AND INSERT

THE SOLID STATE DRIVE

Use your small Phillips screwdriver to remove

the screws on the motherboard. Align the

notches in the SSD with the ridges in the PCIe

slot, then insert at a an angle. Give it a final

push to ensure it is securely in place.

FASTEN THE SCREWS TO SECURE

THE SSD

*Do not overtighten the screws

Use your small Phillips screwdriver to secure

the SSD into place.

1. REMOVE YOUR PC'S BACK PLATE

Especificaciones del producto

Marca:	ADATA
Categoría:	Unidades de estado sólido (ssd)
Modelo:	FALCON
Color del producto:	Zwart
Diagonal de la pantalla:	19.4 "
Resolución:	530 x 1920 Pixels
Pantalla táctil:	Ja
Modos de vídeo compatibles:	720p
Ángulo de visión, horizontal:	89 °
Ángulo de visión, vertical:	89 °
Forma de pantalla:	Flat
Relación de contraste típica:	1000:1
Brillo:	350 cd/m²
Tipo de pantalla táctil:	Multi-gebruiker
luz de fondo LED:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Altavoces incorporados:	Ja
Energía promedio:	2 W
Pantalla, número de colores.:	16.78 miljoen kleuren
Tecnología de visualización:	LED
relación de aspecto:	18:5
Profundidad (sin base):	19 mm
Altura (sin base):	175 mm
Ancho (sin base):	519 mm
Peso (sin base):	3180 g
Diámetro de la pantalla en centímetros.:	49.3 cm
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
Tipo de retroiluminación:	LED
Temperatura de almacenamiento:	-20 - 60 °C
Humedad de almacenamiento:	5 - 85 procent
Número de puertos ascendentes:	2
Sistema de suspensión para la pared.:	Ja
Dimensiones (Ancho x Fondo x Alto):	519 x 175 x 19 mm
Temperatura de funcionamiento (TT):	0 - 40 °C
Humedad relativa de funcionamiento (VV):	20 - 85 procent