Adj 3D Vision Encoder Manual de Usario

Adj No categorizado 3D Vision Encoder

Lee a continuación 📖 el manual en español para Adj 3D Vision Encoder (4 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

User Instructions

10/16

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

3D Vision EncoDEr

SET MODE

ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 3

3D Vision Encoder General Instructions

3D Vision Encoder Precautions

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Do not remove the unit cover under any conditions. There are no

user serviceable parts inside.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-Cord Protection - Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

fixture.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer.

• The fixture should be serviced by qualified service personnel

when:

A. The power cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a

marked change in performance.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the

basic operations of this unit. These instructions contain impor-

tant safety information regarding the use and maintenance of this

unit. Please keep this manual with the unit, for future reference.

3D Vision Encoder Introduction

Introduction: Congratulations and thank you for purchasing the

ADJ 3D Vision Encoder. The 3D Vision Encoder is an essential

piece used to set the DMX address of the 3D Visions.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any

question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.adj.

com for any comments or suggestions. For service related issue

please contact ADJ Products, LLC. Service Hours are Monday

through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.

Voice: (800) 322-6337

Fax: (323) 725-6100

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire,

do not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do

not attempt any repairs yourself, doing so will void your manu-

factures warranty. In the unlikely event your unit may require ser-

vice please contact .ADJ Products, LLC

PLEASE recycle the shipping carton whenever possible.

ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 2

ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - 3D Vision Encoder Instruction Manual Page 5

3D Vision Encoder Indicators, Connections, & Functions

1. Display

2. Set Button – This button is used to conrm setting.

3. Mode Button - This button is used to switch between the dif-

ferent menus.

4 & 5. Up and Down Buttons - Use these buttons to adjust the

DMX address and adjust the DMX channels. (Note: DMX chan-

nel mode should already be set out of the box. The 3D Vision

is a 9 channel unit.)

6. Power Switch – Power the Encoder on/o using either bat-

tery power or connected power adapter.

7. DC12V Input – DC Power socket for included power adapter.

8. Power LED – This LED will glow when the power is switched

“On”.

9. Output - This output connects to the 3D Vision using a CAT 5

Straight Network cable.

3D Vision Encoder Warranty Registration

The 3D Vision Encoder carries a 1 year (365 day) limited warranty.

We recommend you fill out the enclosed warranty card to vali-

date your purchase. All returned service items whether under

warranty or not, must be freight pre-paid and accompany a

return authorization (R.A.) umber. If the unit is under warranty, n

you must provide a copy of your proof of purchase invoice.

Please contact ADJ Products, LLC customer support for a R.A.

number.

SET MODE

13345

DC9-12V OUTPUT

Battery

Adapter

LED

67 8 9

3D Vision Encoder Setting a DMX Address

Setting the DMX address for the 3D Vision is very easy. Follow

these simple instructions to set your desired DMX address.

1. Either connect the supplied power adapter to 3D Vison Encoder

or insert a 9V battery into the battery compartment located at the

front of the unit.

2. Next connect the Encoder to your 3D Vision via CAT 5 straigh

network cable.

3. Connect the 3D Vision to a power source and switch “On” the

power to the Encoder.

4. The Encoder display will show:

Start CH: 0001

CH mode: 0009

5. Use the UP or DOWN buttons to nd your desired DMX

address.

6. Once you have found your desired DMX address press the

SET button to set the DMX address. When you press the SET

button the display will show “Writing Addr...”. Once the address

is set and if it is set correctly the display will read “Writing OK”.

7. The DMX channel mode should be set already for you. The 3D

Vision is a 9 channel unit. Press the MODE button to scroll to the

CH mode setting. Use the UP or DOWN buttons to change the

setting. Press the SET button when nished.

Especificaciones del producto

Marca:	Adj
Categoría:	No categorizado
Modelo:	3D Vision Encoder

¿Necesitas ayuda?

Si necesitas ayuda con Adj 3D Vision Encoder haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado Adj Manuales

Adj PIXIE DRIVER 2000 V3 Manual de Usario

17 Septiembre 2024

Adj Jolt Panel FX2 Manual de Usario

16 Septiembre 2024

Adj Wifi Net 2 Manual de Usario

16 Septiembre 2024

Adj Par Z100 3K2 Manual de Usario

16 Septiembre 2024

Adj H2O Two Manual de Usario

16 Septiembre 2024

Adj Jolt Panel FXIP Manual de Usario

16 Septiembre 2024

Adj Pixie Curve 60 Manual de Usario

16 Septiembre 2024

Adj ElectraPix Par 7 Manual de Usario

16 Septiembre 2024

Adj RDM XS8 Manual de Usario

16 Septiembre 2024

Adj Jolt Bar FXIP Manual de Usario

12 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024