Adj PinPoint Gobo Color Manual de Usario

Adj No categorizado PinPoint Gobo Color

Lee a continuación 📖 el manual en español para Adj PinPoint Gobo Color (8 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
User Instructions
4/16
©2016 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi-
rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
PinPoint Gobo CoLoR
ADJ Products, LLC - www.adj.com - PinPoint Gobo COLOR User Manual Page 3
• DC Powered and Battery Powered
• Dimming 0-100%
• Fast Color Fade & Change and Slow Color Fade & Change,
• UC IR Remote Compatible (Not Included) & Airstream IR
Compatible
• ADJ LED RC2 Compatible (Not Included)
PinPoint Gobo COLOR Warranty Registration
PinPoint Gobo COLOR Features
To optimize the performance of this product, please read these operat-
ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
PinPoint Gobo COLOR General Instructions
The PinPoint Gobo COLOR two year limited warranty. carries a
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. number
must also be written down on a piece of paper included in the ship-
ping carton. If the unit is under warranty, you must provide a copy of
your proof of purchase invoice. You may obtain a R.A. number by con-
tacting our customer support team on our customer support number.
All packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper.
PinPoint Gobo COLOR Introduction
ADJ Products, LLC - www.adj.com - PinPoint Gobo COLOR User Manual Page 2
Unpacking: Thank you for purchasing the PinPoint Gobo COLOR by
ADJ Products, LLC. Every PinPoint Gobo COLOR has been thoroughly
tested and has been shipped in perfect operating condition. Carefully
check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your
xture for any damage and be sure all accessories necessary to oper-
ate the unit has arrived intact. In the case damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Do not return this unit to your dealer
without rst contacting customer support.
Introduction: The ADJ PinPoint Gobo Color is a battery powered
GOBO projector powered by a 10-Watt Quad (RGBA 4-in-1) LED. It
includes 4 standard removable GOBOs and a frost filter to defuse the
beam for wider washes of light. When the GOBO is remove it may be
used as a pinspot to spot tables, decor, architecture or used for spe-
cial effects.
The PinPoint Gobo Color has an easy replaceable GOBO holder so
that user may interchange the supplied GOBOs or to insert custom
GOBOs. Located on the side of the fixture are sliders to manually adjust
the focus and beam angle.
Customer Support: ADJ provides a customer support line, to pro-
vide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.adj.com for any comments or suggestions. Service
Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Stan-
dard Time.
Voice: (323) 582-3322
Fax: (323) 582-3108
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
PinPoint Gobo COLOR Safety Precautions
ADJ Products, LLC - www.adj.com - PinPoint Gobo COLOR User Manual Page 4 ADJ Products, LLC - www.adj.com - PinPoint Gobo COLOR User Manual Page 5
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 3 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
1. Handling of Batteries
1.1 Do Not Short Circuit the Battery
Try to never short circuit the battery. It generates a very high current
which could cause the battery to overheat which may result in elec-
trolyte gel leakage, harmful fumes, or explosion. The LIR tabs may
easily short-circuit by placing them on conductive surface. A short cir-
cuit may lead to heat build up and damage of the battery. An appro-
priate circuitry with PCM is employed to protect accidental short
circuit of the battery pack.
1.2 Mechanical shock
Droping the unit, impact hit, bending, etc. may cause failure or short-
end life of the LIR battery.
2. Other
2.1 Battery connection
1). Direct soldering of wire leads or devices to the battery is strictly
prohibited.
2). Lead tabs with pre-soldered wiring shall be spot welded to the
batteries. Direct soldering may cause damage of components, such
as separator and insulator, by heat build up.
2.2 Prevention of short circuit within a battery pack
There is enough insulation layers between wiring and the batteries to
provide extra safety protection. The battery pack is constructed in a
way that no short circuit will occur which may cause smoke or re.
2.3 Do No Disassemble the Batteries
1). Never disassemble the batteries.
Doing this may cause a internal short circuit in the battery, which may
lead to harmful fumes, re, explosion, or other problems.
2). Electrolyte Gel is harmful
Electrolyte Gel should not leak from the LIR battery. Should the
electrolyte gel come into contact with the skin or eyes, ush the area
of contact immediately with fresh water and seek medical attention
immediately.
2.4 Do Not Expose the Battery to Heat or Fire
Never incinerate or dispose of the batteries in re. This may cause an
explosion, which would be very dangerous.
PinPoint Gobo COLOR Battery Precautions

Especificaciones del producto

Marca: Adj
Categoría: No categorizado
Modelo: PinPoint Gobo Color

¿Necesitas ayuda?

Si necesitas ayuda con Adj PinPoint Gobo Color haz una pregunta a continuación y otros usuarios te responderán


No categorizado Adj Manuales

Adj

Adj PIXIE DRIVER 2000 V3 Manual de Usario

17 Septiembre 2024
Adj

Adj Jolt Panel FX2 Manual de Usario

16 Septiembre 2024
Adj

Adj Wifi Net 2 Manual de Usario

16 Septiembre 2024
Adj

Adj Par Z100 3K2 Manual de Usario

16 Septiembre 2024
Adj

Adj H2O Two Manual de Usario

16 Septiembre 2024
Adj

Adj Jolt Panel FXIP Manual de Usario

16 Septiembre 2024
Adj

Adj Pixie Curve 60 Manual de Usario

16 Septiembre 2024
Adj

Adj ElectraPix Par 7 Manual de Usario

16 Septiembre 2024
Adj

Adj RDM XS8 Manual de Usario

16 Septiembre 2024
Adj

Adj Jolt Bar FXIP Manual de Usario

12 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024