AEG WSE 800-125 Manual de Usario

AEG No categorizado WSE 800-125

Lee a continuación 📖 el manual en español para AEG WSE 800-125 (57 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/57
WS 650-115, WS 715-115, WS 715-125,
WSE 800-125
Instruction for use
Please read and save these instruction
Gebrauchsanleitung
Bitte lesen und aufbewahren
Instruction d’utilisation
Prière de lire et de conserver
Istruzioni d’uso
Si prega di leggere le istruzioni e di conservarle
Instrucciones de uso
Lea y conserve estas instricciones por favor
Instruções de serviço
Por favor leia e conserve em seu poder
Gebruiksaanwijzing
Lees en let goed op deze advizen
Brugsanvisning
Vær venlight at læse og opbevare
Bruksanvisning
Vennligst les og ta godt vare på denne informasjonen
Bruksanvisning
Var god läs och tag tillvara dessa instruktioner
Käyttöohje
Lue ja sä öilyt
ENGLISH 2 WS 650-115, WS 715-115, WS 715-125, WSE 800-125
Introduction You demand the best and buy quality - quality provided by Atlas Copco. We have
built for you a reliable and lasting tool. Working effectively and without endangering
your health is only possible if this instruction for use is read carefully before first us-
ing the tool. We want to satisfy our customers and would like you to buy again AEG
Electric Power Tools from Atlas Copco.
Technical Data
Safety advice ■Please pay attention to the safety instructions in the attached leaflet!
■ Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
■ Always disconnect the plug from the socket before carrying out any work on the ma-
chine.
■ Only plug-in when machine is switched off.
■ Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
■ Before use check machine, cable, and plug for any damages or material fatigue. Re-
pairs should only be carried out by authorised service agents.
■ Allow the machine to come to a stop before putting down.
■ Dust that arises when working in stones with crystalline silicic acid can damage your
health. Do not work on any material containing asbestos. Please note the safety reg-
ulations, VBG, of the employer’s liability insurance association.
■ Never reach into the danger area of the machine when it is running.
■ Always wear safety goggles and ear protectors when working with this machine. It
is further recommended to wear safety gloves, apron, as well as sturdy non-slipping
shoes.
■ Always use the additional handle.
■ Always use the protecting cap when roughing-down and separating.
■ Only use tools whose permitted speed is at least as high as the highest no-load
speed of the machine.
■ Check grinding tools before use. The grinding tool must be properly mounted and
turn freely. Perform a test run for at least 30 seconds without load. Do not use dam-
aged, out of round or vibrating grinding tools.
■ When grinding metal, flying sparks are produced. Take care that no persons are en-
dangered. Because of the danger of fire, no combustible materials should be locat-
ed in the vicinity (spark flight zone). Do not use dust extraction.
■ Due care should be taken that no sparks or sanding dust flying from the workpiece
come into contact with you.
■ Pay attention to the dimensions of the grinding disc. The mounting hole diameter
must fit the mounting flange without play. Do not use reducer pieces or adapters.
■ Never use a cutting disc for grinding. Do not subject cutting discs to side pressure.
■ When separating stone the guide shoe must be used!
Type WS 650- WS 715- WSE 800-
115 115 125 125
Nominal power (W) 650 710 710 800
Min. no-load speed (min-1 ) 2700
Max. no-load speed (min-1 ) 10000 10000 10000 10000
Grinding disk diameter (mm) 115 115 125 125
Thread of work spindle M14 M14 M14 M14
Weight (kg) 1,5 1,5 1,5 1,5
Speed control •
No-load speed limiter •
ENGLISH 3 WS 650-115, WS 715-115, WS 715-125, WSE 800-125
■ The adjusting nut must be tightened before starting to work with the machine.
■ Under extreme operating conditions (e. g. smoothing metals with the backing pad
and vulcanised fibre-grinding disks) high contamination can build up inside the an-
gle grinder. In such cases we recommend: the use of a stationary dust extraction
device; cleaning the machine more regularly; and/or the use of an ELCB safety
switch (earth leakage circuit breaker).
Measured
sound value
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 85 dB (A).
Sound power level = 98 dB (A).
Wear ear protectors!
Measured
vibration value
Typically the weighted acceleration is 5 m/s 2.
Usage This angle grinder can be used for separating and grinding many different materials,
e.g. metal or stone. In case of doubt please read the manufacturers’ instruction.
Do not use this product in any other way as stated for normal use.
Mains
connection
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is pos-
sible as the appliance features protective insulation to DIN 57 740/ VDE 0740 and
CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is con-
nected to the plug terminal marked L or coloured red, and the blue (neutral) wire of
this appliance is connected to the plug terminal marked N or coloured black. Under
no circumstances must the wires of this appliance be connected to the earth termi-
nal of the plug marked either E, with the earth symbol, or coloured green or green/
yellow.
Switching on
and off
Switching on and off: Slide back the On/Off
switch. To lock, depress the front part of the slid-
ing switch.
Switching off: To unlock, depress the back part
of the sliding switch. The switch will automatically
move back to “ ”O .
Smooth start The electronic smooth start will prolong the life of both the motor and the gears.
1
2

Especificaciones del producto

Marca: AEG
Categoría: No categorizado
Modelo: WSE 800-125

¿Necesitas ayuda?

Si necesitas ayuda con AEG WSE 800-125 haz una pregunta a continuación y otros usuarios te responderán


No categorizado AEG Manuales

AEG

AEG KMK525860M Manual de Usario

21 Octubre 2024
AEG

AEG MCFB59 Manual de Usario

20 Octubre 2024
AEG

AEG E6RDO101 Manual de Usario

20 Octubre 2024
AEG

AEG MECK52 Manual de Usario

16 Octubre 2024
AEG

AEG E9KLCS01 Manual de Usario

15 Octubre 2024
AEG

AEG MCFE11 Manual de Usario

14 Octubre 2024
AEG

AEG AZE155 Manual de Usario

7 Octubre 2024
AEG

AEG F8FB86ES Manual de Usario

5 Octubre 2024
AEG

AEG ACC118 Manual de Usario

3 Octubre 2024
AEG

AEG TR1LFV Manual de Usario

3 Octubre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024