Ag Neovo HVWCTRL Manual de Usario

Lee a continuación 📖 el manual en español para Ag Neovo HVWCTRL (21 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/21
1
HVWCTRL IP Controller
HVWCTRL - iPad & PC Software
Installation Manual
Video Wall SETUP
1
Contents
Chapter 1: APP GUIDE FOR THE HVWCIP-SERIES DEVICES.............................................2
1.1 ABOUT THIS DOCUMENT 2 ...............................................................................................................
1.2 GENERAL INSTRUCTIONS 2 .............................................................................................................
Chapter 2: OVERVIEW..........................................................................................................................3
Chapter 3: BEFORE INSTALLATION...............................................................................................4
Chapter 4: NETWORK BANDWIDTH CALCULATOR................................................................5
Chapter 5: VIDEO WALL SETUP......................................................................................................7
Chapter 6: CREATE AND CONFIGURE VIDEOWALL..............................................................8
Chapter 7: IPAD APP SETUP...........................................................................................................15
Chapter 8: ADVANCE SETTING TABS.........................................................................................18
Chapter 9: SIMPLE API COMMANDS...........................................................................................20
TABLE OF CONTENTS
2
APP GUIDE FOR THE HVWCIP-SERIES DEVICES
1.1 ABOUT THIS DOCUMENT
This document explains how to congure the HVWCIP-Series devices to work with an iPad App and
control PC software.
Software version: V7.0.0
Firmware version: V1.5/V5.10 (5.11)
The rmware and software versions listed in this document have been tested within the
recommended settings the units can support and are fully supported by AG Neovo.
It is recommended that users read this entire document before attempting both setup and
rmware updates and fully understand all the steps and procedures outlined in this document.
WARNING – Please make sure when using this guide for an exsiting setup all of the following
items are available:
- HVWCIP-T and HVWCIP-R with 12V 1A power supplies
- HVWCTRL IP Controller
- CAT5/6 cables
- Wireless Gigabit Router with 802.11/a/b/g/n 2.4 GHz; 5 GHz
- Network switch
- RS-232 to bare wire for phoneix RS-232 out
- 3.5mm headphones jack to bare wire (external audio)
- 6 x Ethernet (RJ45 Patch Cable 6 to 3m (10ft) or within the setup CAT5/6 cable runs)
- Wireless Gigabit Router with 802.11/a/b/g/n 2.4 GHz; 5 GHz
1.2 GENERAL INSTRUCTIONS
1. Before begining the setup guide or rmware upgrade ensure that the HVWCIP-Series unit are
powered by the supplied power supply 12V 1A or to proper POE specications.
2. PC Requirements-Windows® XP/ Windows Vista®/ Windows® 7 (Windows® 8/ Windows® 10 are
available)
3. Ensure Laptop or desktop is plugged in to AC power during the update process. It is not
recommended to use battery power during the setup/upgrade. Do not unplug power from the unit
at any time during the rmware update process as this could lead to malfunctions.

Especificaciones del producto

Marca: Ag Neovo
Categoría: No categorizado
Modelo: HVWCTRL

¿Necesitas ayuda?

Si necesitas ayuda con Ag Neovo HVWCTRL haz una pregunta a continuación y otros usuarios te responderán




No categorizado Ag Neovo Manuales

No categorizado Manuales

Últimos No categorizado Manuales