Amprobe TP110KA Manual de Usario

Lee a continuación 📖 el manual en español para Amprobe TP110KA (2 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
INTRODUCTION
The Temperature Probe Series consists of thermocouple sensors. The models are designed for specific measurement
applications such as liquids, solids, gases and surfaces (see reverse side). These probes are designed to operate with
Amprobe temperature sensing multimeters, or the Amprobe Model TC-253C Temperature /Voltage Converter DMM
accessory.
THERMOCOUPLE PROBES
Probes use Type K (chromel-alumel) thermocouple sensors for a wide temperature range. Five models are available
for specific applications (see reverse side). All probes use a standard compensated mini-connector for attachment
directly to the meter or MH101KA Probe Handle. Accuracy is rated at ±1°C, ±2°F, or 0.4% of reading, whichever is
greater.
Note: When using with multimeters, thermocouple plug must be unplugged for direct voltage, resistance, or
current measurements.
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material and workmanship for 1 year from the date of purchase. This warranty does not
cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation
or handling. Resellers are not authorized to extend any other warranty on Amprobe’s behalf. To obtain service during the warranty period,
return the product with proof of purchase to an authorized Amprobe Test Tools Service Center or to an Amprobe dealer or distributor. See
Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STAUTORY -
INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR
THEORY. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential
damages, this limitation of liability may not apply to you.
Temperature Probe Series
Application and Descriptions
SYMBOLS
Caution, risk of electric shock
Refer to the manual
® Amprobe 2007
TEMPERATURE PROBES
MODEL
NUMBER DESCRIPTION TEMP.
RATING
APPLICA-
TION
INDICATING
TIME (99%)
MH101KA
Master Probe
Extension Probe Handle Type K T/C.
Includes 1 ft of 4:1 expandable cable (48”).
For use with TP110K, 120K, and 130 K Probes.
Handle for
TP110KA,
TP120KA,
and
TP130KA
TP110KA
Immersion Probe
A general purpose immersion sensor with
grounded junction for fast response. Stainless
steel sheath. For use with Model MH101K
Probe Handle.
650°C
(1200°F) Liquids 10 seconds
TP120KA
Surface Probe
Heavy Duty, fast response sensor for surface
measurements of hot plates, furnaces, molds,
etc. Stainless steel sheath.
For use with Model MH101K Probe Handle.
650°C
(1200°F) Surface 6 seconds
TP130KA
Air Probe
Exposed junction air sensor with radiation
protection shield. Suitable for all air/gas
measurements. For use with MH101K Probe
Handle.
650°C
(1200°F) Air/gas 45 seconds
TP255A Bead Probe
4 ft. long K-type beaded T/C wire. Includes
standard miniconnector.
200°C
(392°F) Air/gas 5 seconds
TP254A
Immersion Probe
General purpose sensor with inconel sheath
and plastic handle.
1100°C
(2012°F) Liquids 10 seconds
CONFIGURATION
Type K Thermocouple Probes
USA:
Amprobe
Everett, WA 98203
Tel: 1-877-596-2680
Fax: 425-446-6390
Canada
Amprobe
400 Britannia Rd. E. Unit #1
Mississauga, ON L4Z 1X9
Tel: (905) 890-7600
Fax: (905) 890-6866

Especificaciones del producto

Marca: Amprobe
Categoría: No categorizado
Modelo: TP110KA

¿Necesitas ayuda?

Si necesitas ayuda con Amprobe TP110KA haz una pregunta a continuación y otros usuarios te responderán




No categorizado Amprobe Manuales

No categorizado Manuales

Últimos No categorizado Manuales