AMX MXD-1001 Manual de Usario

AMX No categorizado MXD-1001

Lee a continuación 📖 el manual en español para AMX MXD-1001 (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/2
QUICK START GUIDE
MXD-1001 10.1" Modero X Series® G5 Wall Mount Touch Panel
Overview
MXD-1001 10.1" Modero X Series ® G5 Wall Mount Touch Panels feature the G5 Graphic
Engine as well as a Quad Core Processor. These panels feature edge-to-edge capacitive touch
glass with multi-touch capabilities. They feature advanced technology empowering users to
operate AV equipment seamlessly, while providing the ultimate in audio and video quality. The
MXD-1001 is available in Portrait and Landscape layouts:
Product Specifications
MXD-1001 Installation
• For more detailed installation instructions including important notes on thermal
concerns with Rack and Wall installations, refer to the X-Series-G5 Touch Panels
MXD/T-1001 & MXD/T-701 Instruction Manual (available to view/download from
www.amx.com).
• Detailed specifications drawings for the MXD-1001 are available to download from
www.amx.com.
The MXD-1001 may be installed directly into a solid surface environment, using either solid
surface screws or the included locking tabs for different mounting options.
Once installed, the MXD-1001 is contained within a clear outer housing known as the Backbox
(FIG. 2). The Backbox is removed to install it into a wall, or when using the optional Rough-In
Box accessory (FG039-17).
Note: For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the Backbox to the surface. For thin walls or solid surfaces, use mounting
screws (not included).
Installing the MXD-1001 Into a Wall
The MXD-1001 comes with a clear plastic Backbox (designed to attach the panel to most
standard wall materials. This Backbox has four locking tabs (two on top and two on bottom) to
help lock the Backbox to the wall. These locking tabs are only extended AFTER the Backbox is
inserted into the wall (FIG. 3).
• When installing the Backbox, make sure that the assembly is in the correct position and
in the correct place. Once the locking tabs are extended and locked into place, removing
the Backbox may be difficult without having access to the back of the wall or causing
damage to the wall.
• In order to ensure a stable installation of the MXD-1001, the thickness of the wall
material must be a minimum of .50 inches (1.27cm) and a maximum of .875 inches
(2.22cm). The mounting surface should also be smooth and flat.
Installing the Backbox
For best results, use the included Installation Template (68-5968-03) to ensure proper
placement. The template is marked on one side with directions for both landscape and portrait
installations to ensure that the touch panel and Backbox are properly aligned.
WARNING: Using the Installation Template to select the f inal placement of the Backbox is highly
recommended. The outside edges of the template are the same dimensions as the touch panel,
which allows you to troubleshoot possible conflicts with wall edges, doors, and other potential
obstacles.
1. Prepare the area by removing any screws or nails from the drywall before beginning the
cutout process.
2. After ensuring proper placement, cut out the mounting surface for the Backbox, using
the (included) Installation Template as a guide.
CAUTION: Making sure the actual cutout opening is slightly smaller than the provided
dimensions is highly recommended. This provides a margin of error if the opening needs to
be expanded. Too little wall material removed is always better than too much.
3. Thread the incoming cables through the surface opening (FIG. 4).
Leave enough slack in the wiring to accommodate any re-positioning of the panel.
4. Remove the Backbox knockouts and thread the incoming wiring through the knockout
holes.
5. Thread the incoming cables from the mounting surface opening and through the
knockouts.
6. Push the Backbox into the mounting surface. Insure that the locking tabs lie flush
against the Backbox and that the Backbox goes freely into the opening.
7. Extend the locking tabs on the sides of the Backbox by tightening the screws inside the
box until snug.
Apply enough pressure to the screw head to keep the box flush with the wall: this
ensures that the locking tabs will tighten up against the inside of the wall.
Note: The maximum recommended torque to screw in the locking tabs on the Backbox is 5
IN-LB [56 N-CM]. Applying excessive torque while tightening the tab screws, such as with
powered screwdrivers, can strip out the locking tabs or damage the Backbox.
8. For additional strength, #4 mounting screws (not included) may be secured via
mounting circular holes located at the left and right sides of the MXD-1001 (FIG. 4).
In order to prevent damage to the touch panel, make sure that these are flush with the
Backbox.
Portrait MXD-1001-P FG5968-48
Landscape MXD-1001-L FG5968-49
FIG. 1 MXD-1001-P/L (PORTRAIT AND LANDSCAPE)
MXD-1001 SPECIF ICATIONS
Dimensions (HWD) • Landscape: 6 11/16" x 9 7/8" x 2 5/8" (171mm x 252mm x
67mm)
• Portrait: 9 7/8" x 6 11/16" x 2 5/8" (252mm x 171mm x
67mm)
Weight 2.0 lbs (0.91 Kg)
Power Consumption • Full-On: 12.95 W maximum
• Standby: 5.8 W
• Shutdown: 1 W
• Start-Up Inrush Current: Not applicable due to PoE standard
External Power
Supply Required
Optimal performance requires use of one of the following AMX
PoE power supplies (not included):
• PS-POE-AF-TC, PoE Injector, 802.3AF Compliant (FG423-83)
• NXA-ENET8-2POE, Gigabit PoE Ethernet Switch (FG2178-63)
Certifications • FCC Part 15 Class B
• C-Tick CISPR 22 Class B
• CE EN 55022 Class B and EN 55024
• CB Scheme IEC 60950-1
• IC
• IEC/EN-60950
• UL 60950-1
• RoHS/WEEE compliant
Environmental • Temperature (Operating): 32° F to 104° F (0° C to 40° C)
• Temperature (Storage): 4° F to 140° F (-20° C to 60° C)
• Humidity (Operating): 20% to 85% RH
• Humidity (Storage): 5% to 85% RH
• Power ("Heat") Dissipation:
On: 44.2 BTU/hr
Standby: 19.8 BTU/hr
Included Accessories • MXA-USB-C, USB Port Cover Kit (FG5968-18)
• MXA-CLK, Modero X/S Series Cleaning Kit (FG5968-16)
• Installation Template 10”
Sleep ButtonNFC Sensor
Sleep
NFC
Button
Sensor
MXD-1001-P MXD-1001-L
FIG. 2 MXD-1001 BACKBOX (REAR VIEW)
FIG. 3 MXD-1001 (LANDSCAPE)
Locking tabs
Locking tabs
Backbox
Backbox knockouts (X4)
Locking tabs (X4)
© 2015 Harman. All rights reserved. Modero X and Modero X Series, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are
registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks
of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
93-5968-48 REV: E
Last Revised: 6/22/2015
9. Insert each connector into its corresponding location along the back of the device. To
reach the RJ45 connector, gently pull it from beneath the electronics cover. Attach the
Ethernet cable and gently push the connection back under the cover.
Note: To facilitate connection of the RJ45 connector to the Ethernet cable, press the
RJ45’s cable into the RJ45 cable clip to hold it in a stable position. Make sure to remove
the cable from the cable clip before continuing the rest of the installation.
10. Test the incoming wiring by attaching the panel connections to their terminal locations
and applying power. Verify that the panel is receiving power and functioning properly to
prevent repetition of the installation.
Note: Do not disconnect the connectors from the touch panel. The unit must be installed
with the attached connectors before being inserted into the mounting surface.
Remove power before continuing with the installation.
11. Latch the panel onto the top hooks on the Backbox and push it down (Landscape) onto
the bottom snaps or on the left side and push it to the right (Portrait) (FIG. 5).
Press gently but firmly on the ends until the snaps “click” to lock it down.
WARNING: If you see a gap between the panel and the Backbox, or feel any binding while locking
down the panel, stop immediately and verify that no cables or other items are in the way. Do not
force the panel into position, as this can cause damage to the touch screen or the panel
electronics.
12. Reconnect the terminal Ethernet and USB to their respective locations on the Ethernet
port.
Powering On/Off X Series G5 Panels
Modero X Series G5 touch panels may be powered on by touching and holding the Sleep
button. To power off the panel, press and hold the Sleep button, and select Power Off on the
on-screen menu (FIG. 6):
Conf iguration and Programming
X Series G5 touch panels are equipped with a Settings menu that provides the ability to
configure various features on the panels. To access the Settings menu, press and hold the
Sleep button, and select Settings.
Note: Information on the Settings menu, panel configuration, and programming is provided in
the Modero X Series G5 Programming Guide, available at www.amx.com.
Setting the Panel’s Device Number and Device Name
1. In the Settings menu, select NetLinx. This opens a password keypad.
2. Enter the panel password into the keypad (the default is ) and select 1988 OK to access
the NetLinx page.
3. Press Device Number to open the NetLinx editing window.
4. Enter a unique Device Number assignment for the panel and press OK.
5. Enter a unique Device Name assignment for the panel and press OK.
Conf iguring the Panel’s IP Address
These steps configure the panel to communicate with a network; it is still necessary to
connect to the NetLinx Master (see Connecting to a NetLinx Master below).
Network Communication via DHCP
1. In the Ethernet page, press DHCP/Static field to open the DHCP/Static window. Note
that DHCP is the default setting.
2. Select Host Name, enter the new host name
3. Press OK to save changes.
Network Communication via Static Address
1. In the Ethernet page, press DHCP/Static to open the DHCP/Static window.
2. Select Static to open the Static IP window.
3. Press any field to open a keypad or keyboard (depending on the field), and enter the
appropriate network address information.
4. Press OK to save your changes and return to the Ethernet page.
Connecting to a NetLinx Master
To establish the type of connection to make between the panel and the NetLinx Master:
1. In the NetLinx page, press Mode to choose the connection mode (URL, Listen or Auto):
2. If password security is enabled on the target Master, enter the Username and Password:
a. Select Username to open the NetLinx window.
b. Enter the Username and Password required by the Master.
c. Press OK to save changes and return to the NetLinx page.
Related Software and Additional Documentation (at www.amx.com)
• Programming the Modero X Series G5 touch panels requires the use of the latest
versions of NetLinx Studio and TPDesign5, both available to download at www.amx.com.
Refer to the NetLinx Studio and TPDesign5 online help for information.
• For information on designing touch panel pages intended to optimize the Modero X
Series G5 experience, refer to the G5 Considerations Guide.
• For additional information on the MXD-1001 panel, refer to the X-Series-G5 Touch
Panels MXD/T-1001 & MXD/T-701 Instruction Manual.
• For detailed information on the Settings menu as well programming information and
instructions on upgrading firmware, refer to the Modero X Series G5 Programming Guide.
FIG. 4 MXD-1001 BACKBOX INSTALLATION (LANDSCAPE)
FIG. 5 INSTALLING THE MXD-1001
#4 Screws
4X Knock-Outs
Remove for Cable
Routing as Needed
4X Installation Clamp
for Wall Thickness
.31 [12.0] to .98 [.25.0]
Latch Hook
MXD-1000
(Landscape)
Backbox
Mounting Surface
Snaps
Latch Hook
FIG. 6 SLEEP BUTTON - PRESS AND HOLD TO ACCESS POWER OFF/SETTINGS OPTIONS
CONNECTION MODES
Mode Description Procedures
URL The device connects to the
target Master’s IP address via
a TCP connection.
1) Select URL in the Mode menu.
2) Enter the Master IP/URL, Master Port Number,
and Username/Password (if required by the
Master).
3) Press OK to save changes.
Listen This mode allows the panel to
“listen” for the Master’s
communication signals.
Note that in this mode, the
System Number and Master IP/
URL fields are read-only.
1) Select Listen in the Mode menu.
2) Confirm the panel’s IP address is on the
Master’s URL list (via NetLinx Studio).
3) Press OK to save changes.
Note: The Host Name (set on the Ethernet page),
can be used to locate the panel on the Master
(particularly useful for DHCP connections where
the IP address can change).
Auto Use this mode when both the
panel and the NetLinx Master
are on the same Subnet.
1) Select Auto in the Mode menu.
2) Enter the System Number and Username and
Password (if applicable).
3) Press OK to save changes.

Especificaciones del producto

Marca: AMX
Categoría: No categorizado
Modelo: MXD-1001

¿Necesitas ayuda?

Si necesitas ayuda con AMX MXD-1001 haz una pregunta a continuación y otros usuarios te responderán


No categorizado AMX Manuales

AMX

AMX HPX-MSP-7-SL Manual de Usario

18 Septiembre 2024
AMX

AMX HPX-MSP-10-SL Manual de Usario

18 Septiembre 2024
AMX

AMX TPC-WIN8-TAB Manual de Usario

17 Septiembre 2024
AMX

AMX NMX-DEC-N1222A Manual de Usario

16 Septiembre 2024
AMX

AMX NMX-DEC-N2222A Manual de Usario

16 Septiembre 2024
AMX

AMX NMX-DEC-N1233 Manual de Usario

16 Septiembre 2024
AMX

AMX NMX-DEC-N2211 Manual de Usario

16 Septiembre 2024
AMX

AMX NMX-ENC-N1134A Manual de Usario

16 Septiembre 2024
AMX

AMX NMX-ENC-N1133 Manual de Usario

16 Septiembre 2024
AMX

AMX NMX-ENC-N2315-WP Manual de Usario

16 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024