Antec Sonata II Manual de Usario
Antec
Mantenimiento de computadoras
Sonata II
Lee a continuación 📖 el manual en español para Antec Sonata II (10 páginas) en la categoría Mantenimiento de computadoras. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/10
2
At Antec, we continually refine and improve our products to ensure the highest quality. So it's
possible that your new case may differ slightly from the descriptions in this manual. This isn't
a problem; it's simply an improvement. As of the date of publication, all features, descriptions,
and illustrations in this manual are correct.
SONATA II USER'S MANUAL
This case is designed to meet Intel's Thermally Advantaged Chassis (TAC) design guide
requirements. It comes with a unique Antec Chassis Air Guide (ACAG) to help cool high
performance CPUs.
It comes with an Antec SmartPower 2.0 series power supply with the newest ATX12V version 2.0
specifications. This includes dual 12V output circuitry that delivers safer and more reliable output
to your system's components, as well as higher energy efficiency, which reduces power consum
ption by up to 25% saving you money on your electricity bill. In addition we've included a variety
of industrial-grade protective circuitry: OCP (over current protection), OPP (over power
protection), OVP (over voltage protection), UVP (under voltage protection), and SCP (short cir-
cuit protection).
THE PUSH-PULL FAN QUIET POWER SUPPLY
SmartPower 2.0 features an innovative design to help decrease noise during normal use, but which
still allows for superior cooling capabilities as load increases. To this end SmartPower 2.0 features
both an internal intake fan as well as a unique external exhaust fan. The internal intake fan
operates when the power supply is turned on. It rotates slowly to blow out the hot air from the
power supply, and is thermally controlled, speeding up as heat increases. The external exhaust fan
remains off to make sure your computer maintains a quiet computing environment until the power
supply senses the required temperature to turn on the external exhaust fan.
This power supply is backwards compatible with previous ATX foam factor power supplies. To
make sure you connect your power supply properly, please refer to the user manuals supplied with
your motherboard and peripherals before connecting any of them to the power supply.
The power supply comes with a main power switch. Make sure you turn the switch to the ON
( I ) position before you boot up your computer for the first time.
Applies only to models designed for sale in the European Union:
SmartPower 2.0 series power supply models designed for the EU includes Power Factor
Correction (PFC) circuitry in accordance with European standard regulation code EN61000-3-2.
By altering the input current wave shape, PFC improves the power factor of the power supply.
This results in increased energy efficiency, reduced heat loss, prolonged life for power distribution
and consumption equipment, and improved output voltage stability.
SETTING UP
1. Place the case upright on a flat, stable surface. The power supply fan should be at the back,
facing you.
2. Note (not applicable to models designed for the European Union): Before installation, check
Disclaimer
This manual is intended only as a guide for Antec's Computer Enclosures. For
more comprehensive instructions on installing your motherboard and peripherals,
please refer to the user's manuals which come with your components and drives.
3
the red voltage switch setting on the power supply. It should match your local voltage (115V
for North America, Japan, etc. and 230V for Europe and many other countries). If it doesn't
match, please change the setting. If you don't, you could damage your equipment and void
your warranty.
3. Remove the thumbscrews from the panel with the latch. Unlock the side panel, swing the panel
out, and remove it. Set the panel safely aside. Please don't try to use your fingernails toNote:
pry or lift the panel.
4. Inside the case you should see the power supply, the 120mm TriCool fan preinstalled, the
Antec Chassis Air Guide (ACAG), some wiring with marked connectors (USB, PWR etc.), and
installed I/O panel, a power cord. You will also find a bag of hardware (screws, brass
standoffs, plastic stands, etc.)
5. Lay the case down with the open side facing up. You need to remove the Antec Chassis Air
Guide (ACAG) before your motherboard installation. To remove the ACAG:
6. Remove the two screws and loosen the thumbscrew found at the bottom of the ACAG. (picture 1)
7. Loosen the thumbscrew near the 120mm fan grill, that is holding the ACAG to the chassis.
(picture 2).
8. Loosen the thumbscrew at the top of the ACAG under the power supply. (picture 3)
9. With both your hands holding the ACAG, slowly slide the ACAG toward the front of the case
until it stops.
10. Raise the top of the ACAG and slide the ACAG out from its position. You will see a Tube
remaining in the chassis. You can leave the tube in the case.
11. If you want to remove the tube, slide the tube towards the top of the case. Pull the tube away
and put the tube aside.
two screws thumbscrews
Especificaciones del producto
| Marca: | Antec |
| Categoría: | Mantenimiento de computadoras |
| Modelo: | Sonata II |
¿Necesitas ayuda?
Si necesitas ayuda con Antec Sonata II haz una pregunta a continuación y otros usuarios te responderán
Mantenimiento de computadoras Antec Manuales
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
7 Septiembre 2024
Mantenimiento de computadoras Manuales
- Mantenimiento de computadoras Akasa
- Mantenimiento de computadoras Icy Box
- Mantenimiento de computadoras Asus
- Mantenimiento de computadoras SilverStone
- Mantenimiento de computadoras Sharkoon
- Mantenimiento de computadoras 3M
- Mantenimiento de computadoras Thermaltake
- Mantenimiento de computadoras Gigabyte
- Mantenimiento de computadoras Techly
- Mantenimiento de computadoras Be Quiet!
- Mantenimiento de computadoras Supermicro
- Mantenimiento de computadoras Genesis
- Mantenimiento de computadoras Dell
- Mantenimiento de computadoras Intel
- Mantenimiento de computadoras Cooler Master
- Mantenimiento de computadoras Corsair
- Mantenimiento de computadoras XPG
- Mantenimiento de computadoras NZXT
- Mantenimiento de computadoras Monoprice
- Mantenimiento de computadoras Cougar
- Mantenimiento de computadoras Zalman
- Mantenimiento de computadoras StarTech.com
- Mantenimiento de computadoras Advantech
- Mantenimiento de computadoras Savio
- Mantenimiento de computadoras ModeCom
- Mantenimiento de computadoras Evnbetter
- Mantenimiento de computadoras Xigmatek
- Mantenimiento de computadoras Akyga
- Mantenimiento de computadoras Enermax
- Mantenimiento de computadoras Rosewill
- Mantenimiento de computadoras AeroCool
- Mantenimiento de computadoras Krux
- Mantenimiento de computadoras 3R System
- Mantenimiento de computadoras SilentiumPC
- Mantenimiento de computadoras Logic
- Mantenimiento de computadoras Fractal Design
- Mantenimiento de computadoras Chieftec
- Mantenimiento de computadoras Chenbro Micom
- Mantenimiento de computadoras CoolerMaster
- Mantenimiento de computadoras HYTE
- Mantenimiento de computadoras Phanteks
- Mantenimiento de computadoras IStarUSA
Últimos Mantenimiento de computadoras Manuales
25 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
22 Octubre 2024
20 Octubre 2024
18 Octubre 2024
3 Octubre 2024
3 Octubre 2024
3 Octubre 2024