Apantac DA-HDTV-SDI Manual de Usario

Apantac No categorizado DA-HDTV-SDI

Lee a continuación 📖 el manual en español para Apantac DA-HDTV-SDI (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
DA-HDTV-SDI
USER MANUAL
HDMI/DVI to SDI
CONVERTER w/o
SCALER
Troubleshooting Q & A
There is no image on my SDI monitor.
If your source is 1080p, your monitor may only
support 1080i, but not 1080p. Turn the rotary dial
to position 1 to change your 1080p source to
1080i.
There is no image on my SDI monitor.
Check the color of the status indicator. If the indi-
cator is green, it means there is power but no
input source is detected, this may be related to
the content protection on the HDMI source. If this
is the case, please call Apantac for technical sup-
port at (503) 968- 3000.
I have both the RJ-45 and HDMI input
plugged in, but there is no image on my SDI
monitor.
Push the scan button once, it will scan for the
active source. If both RJ45 and HDMI inputs have
active sources, the RJ45 has priority.
The status indicator LED is not lit.
Check for a possible loose power adapter connec-
tion. Use the fastener that comes with the acces-
sories kit to ensure a secure connection.
© 2012 APANTAC LLC, All rights reserved
7556 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
The content of this document is provided in connection
with Apantac LLC (“Apantac”) products. Apantac
makes no representation or warranties with respect to
the accuracy or completeness of the contents of this
publication and reserves the right to make changes to
specifications and product descriptions at any time
without notice.
1. HDMI Loop out
2. HDMI input
3. RJ45 Input (compatible with Tahoma
Multiviewer)
4. SCAN - will scan between the 2 inputs
to look for an active signal
1. Power Supply Fastener
2. 5V 3.2A Power Input
3. Function Selection Rotary Switch
4. Stereo Phone Jack
5. SDI out 1
6. SDI out 2 (terminator should be ap-
plied when not in use)
1. Status Indicator - Turns Green when
powered on, turns amber when HDMI
signal is locked on
DA-HDTV-SDI REAR VIEW
DA-HDTV-SDI TOP VIEW
DA-HDTV-SDI FRONT VIEW
Installation
1. Connect the power adapter and if needed, lock
the 5V DC power adapter with the supplied ac-
cessories (located in the small, transparent plastic
bag).
2. Connect a HDMI signal to one or the other input
of the DA-HDTV-SDI.
3. Connect the SDI output to the receiving device
via a coax cable.
4. Use the internal test signals to ensure proper
connectivity between the DA-HDTV-SDI and the
receiving device. Select the test signal video for-
mat that will be in use when converting HDMI to
SDI to validate that the receiving device accepts
it. (Keep in mind that if you feed a 1080p HDMI
signal, the SDI output will be, by default, a 3G
SDI signal.)
Set the rotary switch to position 0 (default) or 1 if
you feed a 1080p HDMI signal and want to get a
1080i SDI output signal to enable the conversion.
The table below shows the supported formats.
FORMAT HDMI INPUT SDI OUTPUT
1920x1080p 60Hz 1080p60 1080p60
1080i60*
1920x1080p 59.94Hz 1080p59.94 1080p59.94
1080i59.94*
1920x1080p 50Hz 1080p50 1080p50
1080i50*
1920x1080i 60Hz 1080i60 1080i60
1920x1080i 59.94Hz 1080i59.94 1080i59.94
1920x1080i 50Hz 1080i50 1080i50
1280x720p 60Hz 720p60 720p60
1280x720p 59.94Hz 720p59.94 720p59.94
1280x720p 50Hz 720p50 720p50
1440x480i 59.94Hz 480i59.94 480i59.94
1440x576i 50Hz 576i50 576i50
Pin # Signal Pin # Signal
1 TMDS Data 2+ TMDS Clock Shield 11
2 TMDS Data 2 Shield TMDS Clock - 12
3 TMDS Data 2- 13 CEC
4 TMDS Data 1+ 14
Reserved
(N.C. on device)
5 TMDS Data 1 Shield SCL 15
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ DDC/CEC Ground 17
8 TMDS Data 0 Shield +5 Power 18
9 TMDS Data 0- Hot Plug Detect 19
10 TMDS Clock+
HDMI Pinout
Features
Supports HDMI 1.2 and 1.3a
HDCP Compliant
Can convert 1080p input to
1080i output
Built-in Color Bar generator
Tahoma multiviewer compatible
RJ45 input
HDMI loop out
2 HD-SDI output with 4 channels
of embedded audio
Analog Stereo output
*When rotary switch is set to posion 1
Supported Formats
Accessories
Power Adapter Stereo Phone Jack (1 x
Power Adapter
Fastener
75 Ω Terminator Mounting Screws
Package Contents
DA-HDTV- SDI
User Manual
Power Adapter (5V 3.2A)
Stereo Phone Jack (1 x 2)
75 Ω Terminator
Power Adapter Fastener
Magnetic Mounting Plate
Mounting Screws
MODEL -HDTV-SDI DA
DESCRIPTION HDMI to SDI Converter with
Looping Input and Dual Out-
put
INPUT 1 x HDMI, 1 x RJ45 (HDMI)
OUTPUT 2 x SDI, 1 Stereo Audio Phone
Jack
ADJUSTMENTS Rotary dial for interlacing and
internal color bars
MAXIMUM RESOLUTION /
DISTANCE
HD-SDI up to 140 m, 3G up
to 120 m
MOUNT Magnetic
POWER 5V 3.2A
DIMENSION 62 W x 112 D x 35 H (mm)
Specifications

Especificaciones del producto

Marca: Apantac
Categoría: No categorizado
Modelo: DA-HDTV-SDI

¿Necesitas ayuda?

Si necesitas ayuda con Apantac DA-HDTV-SDI haz una pregunta a continuación y otros usuarios te responderán




No categorizado Apantac Manuales

No categorizado Manuales

Últimos No categorizado Manuales