Apc FS-AC-6001-B Manual de Usario

Apc No categorizado FS-AC-6001-B

Lee a continuación 📖 el manual en español para Apc FS-AC-6001-B (120 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/120

Installation Manual

HyperPod System

990-5862-001

Publication Date: May 2017

Schneider Electric IT Corporation Legal Disclaimer

The information presented in this manual is not warranted by the Schneider Electric IT Corporation to be

authoritative, error free, or complete. This publication is not meant to be a substitute for a detailed operational

and site specific development plan. Therefore, Schneider Electric IT Corporation assumes no liability for

damages, violations of codes, improper installation, system failures, or any other problems that could arise

based on the use of this Publication.

The information contained in this Publication is provided as is and has been prepared solely for the purpose of

evaluating data center design and construction. This Publication has been compiled in good faith by Schneider

Electric IT Corporation. However, no representation is made or warranty given, either express or implied, as to

the completeness or accuracy of the information this Publication contains.

IN NO EVENT SHALL SCHNEIDER ELECTRIC IT CORPORATION, OR ANY PARENT, AFFILIATE OR

SUBSIDIARY COMPANY OF SCHNEIDER ELECTRIC IT CORPORATION OR THEIR RESPECTIVE

OFFICERS, DIRECTORS, OR EMPLOYEES BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL,

PUNITIVE, SPECIAL, OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR

LOSS OF BUSINESS, CONTRACT, REVENUE, DATA, INFORMATION, OR BUSINESS INTERRUPTION)

RESULTING FROM, ARISING OUT, OR IN CONNECTION WITH THE USE OF, OR INABILITY TO USE THIS

PUBLICATION OR THE CONTENT, EVEN IF SCHNEIDER ELECTRIC IT CORPORATION HAS BEEN

EXPRESSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SCHNEIDER ELECTRIC IT

CORPORATION RESERVES THE RIGHT TO MAKE CHANGES OR UPDATES WITH RESPECT TO OR IN

THE CONTENT OF THE PUBLICATION OR THE FORMAT THEREOF AT ANY TIME WITHOUT NOTICE.

video, text, and photographs) rests with Schneider Electric IT Corporation or its licensors. All rights in the

content not expressly granted herein are reserved. No rights of any kind are licensed or assigned or shall

otherwise pass to persons accessing this information.

This Publication shall not be for resale in whole or in part.

Table of Contents

HyperPod System Installation i

General Information ...............................................................................................1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Loading Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

HyperPod SKU List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Documentation Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Manual updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Unpacking and Inspecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety.....................................................................................................................4

Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Safety Recommendations for the HyperPod System . . . . . . . . . . . . . . . . . . . . . . 5

Planning the Installation.........................................................................................6

General guidelines for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Enclosures and Power Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Layout and Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

List of Recommended Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Systems Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Basic configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Component Identification .....................................................................................10

HyperPod System Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Vertical Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

FS-FM-1001-B - Vertical Post Assembly, 2750mm (Short) . . . . . . . . . . . . . . . .11

FS-FM-1002-B - Vertical Post Assembly, 3200mm (Tall) . . . . . . . . . . . . . . . . . .11

Width Beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

FS-FM-2001-B - Width Beam Assembly, 1200mm . . . . . . . . . . . . . . . . . . . . . . .11

Telescoping Beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

FS-FM-3001-B - Telescoping Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

End Cap Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

FS-FM-4001-B - End Cap Assembly (Short)

FS-FM-4002-B - End Cap Assembly (Tall) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Door Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

FS-DR-2001-B - Standard Door Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Door and Rail Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

FS-DR-1001-B - Door and rail assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Windows, Rails, and Side Brushes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

FS-WI-1001-U - Window Assembly (270 x 600) . . . . . . . . . . . . . . . . . . . . . . . . .16

FS-WI-1002-B - Window Rail Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

FS-WI-1003-B - Window Brush Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Row length brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

FS-AC-2001-U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

HyperPod System Installationii

Roof Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

FS-RF-2001-U - 4ft Aisle Simple Roof Panel, 300mm . . . . . . . . . . . . . . . . . . . .18

FS-RF-2002-U - 4ft Aisle Simple Roof Panel, 600mm . . . . . . . . . . . . . . . . . . . .18

FS-RF-2003-U - 4ft Aisle Simple Roof Panel for Sprinkler Option, 600mm . . . .18

Solid Roof Filler Panel Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

FS-RF-1001-B Solid Roof Filler Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Stop Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

FS-FM-5001-B Stop Rail Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Seal Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

FS-AC-1001-U Sealing Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Blanking Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

FS-AC-5001-U - 300mm (12 in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

FS-AC-5002-U - 600mm (24 in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

FS-AC-5003-U - 750mm (28 in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

FS-AC-5004-U - 800mm (30 in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Installation Procedure Overview..........................................................................23

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Customizing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Installation locations for width beams and telescoping beams . . . . . . . . . . . . . .24

Basic Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Frame end configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Telescoping beam assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Temporary frame support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Secure the frame to the floor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Install the end caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Install the door frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Install the doors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Install frame seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Install the windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Row length brush installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Roof panel installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Stop rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Install the blanking panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Accessory Kits..................................................................................................... 51

End Row Transition Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

FS-AC-7001-B - Distribution Cabinet, MH50 . . . . . . . . . . . . . . . . . . . . . . . . . . .51

FS-AC-7002-B - Distribution Cabinet, Split . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

FS-AC-7003-B - Distribution Cabinet, Solid . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Drop Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

FS-RF-3001-U Drop roof panel, 300mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

FS-RF-3002-U Drop roof mounting rail, 300mm . . . . . . . . . . . . . . . . . . . . . . . . .52

FS-RF-3003-U Drop roof panel, 600mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

FS-RF-3004-U Drop roof mounting rail, 600mm . . . . . . . . . . . . . . . . . . . . . . . . .52

FS-RF-3005-U Drop roof panel, 750mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

FS-RF-3006-U Drop roof mounting rail, 750mm . . . . . . . . . . . . . . . . . . . . . . . . .52

HyperPod System Installation iii

Ceiling Panel Lock Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

ACDC2016 Ceiling Panel Lock System, 100-120V (with power supply) . . . . . . 53

ACDC2017 Ceiling Panel Lock System, 200-240V (with power supply) . . . . . . 53

ACDC2015 Ceiling Panel Lock System, (no power supply) . . . . . . . . . . . . . . . . 54

Rack Height Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

FS-AC-8001-U - Rack Height Adapter, 300mm . . . . . . . . . . . . . . . . . . . . . . . . . 55

FS-AC-8002-U - Rack Height Adapter, 600mm . . . . . . . . . . . . . . . . . . . . . . . . . 55

FS-AC-8003-U - Rack Height Adapter, 750mm . . . . . . . . . . . . . . . . . . . . . . . . . 55

FS-AC-8004-U - Rack Height Adapter, 800mm . . . . . . . . . . . . . . . . . . . . . . . . . 55

Cantilever Support Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

FS-AC-3001-B - Large Cantilever Support Arms . . . . . . . . . . . . . . . . . . . . . . . . 56

FS-AC-3003-B - Mini Cantilever Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

FS-AC-3002-B - Overhead Support Frame, 8 - 12ft . . . . . . . . . . . . . . . . . . . . . 57

Power Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

FS-AC-4001-B - Power Raceway End Module . . . . . . . . . . . . . . . . . . . . . . . . . 58

FS-AC-4002-B - Power Raceway Main Module . . . . . . . . . . . . . . . . . . . . . . . . . 58

FS-AC-4003-B - 300mm Side Cover Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

FS-AC-4004-B - 50/150mm Side Cover Pack . . . . . . . . . . . . . . . . . . . . . . . . . . 58

FS-AC-4005-B - Power Raceway Extension Module . . . . . . . . . . . . . . . . . . . . . 58

Lighting kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

ACDC2018, ACDC2019 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

FS-AC-6001-B - Lighting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Overhead Duct Riser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

FS-RF-5001-B - Overhead Duct Riser, 8ft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

FS-RF-5002-B - Overhead Duct Riser, 10ft . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

FS-RF-5003-B - Overhead Duct Riser, 12ft . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Crossover Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

FS-AC-4006-B - Aisle Crossover Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Single Swing Door Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

FS-DR-3001-B - Swing Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Installation of Optional Accessories .................................................................... 63

Transition Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Crossover Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Mini Cantilever Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Power Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Power Raceway Configuration options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Post Cantilevers and Suspension System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Possible Configurations for Post Cantilevers: . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Standard configuration installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Dropped Roof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Install the ceiling panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Solid Roof Filler Panel for Drop Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

HyperPod System Installationiv

Ceiling Panel Dropout Control System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

System Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Power Supply Component Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Power supply installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Electromagnetic locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Temperature switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Electrical boxes and cable routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Alarm beacon installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Smoke detector installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Maintenance steps for dropout ceiling system: . . . . . . . . . . . . . . . . . . . . . . . . . .94

Troubleshooting diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Overhead Duct Mounting Riser Roof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Riser Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Lighting Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Lighting System Setup and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Rack Height Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

FS-AC-8001-U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

FS-AC-8002-U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

FS-AC-8003-U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

FS-AC-8004-U . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Single Swing Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

1HyperPod System Installation

General Information

Features

The HyperPod™ is a free standing air containment system. Fully configured racks can be deployed or

removed from the HyperPod as necessary. Schneider Electric racks or other EIA-310-D racks can be

used in a HyperPod system.

The HyperPod includes the following features:

• Two heights available for vertical posts: Tall = 3200mm and Short = 2750mm

• Telescoping side beams can extend the HyperPod length from 8 to 12 ft.

• Additional telescoping beams can be added to the vertical posts to extend the Pod up to another

12 feet.

The basic HyperPod can be customized with the following accessories:

• Power Raceways

• Overhead ducts

• Rack space blanking panels

• Cantilever support arms

• Overhead support frame

• Door assemblies

• Height adapters accommodate multiple rack heights

• Lighting assembly

• End Row Power Transition Cabinets

• Drop roof

• Crossover tray

The HyperPod system provides a barrier between the hot exhaust and cold intake air streams in the IT

environment. The separation of the hot and cold air streams in the environment increases the efficiency

and effectiveness of the cooling system that supports the critical IT equipment. The separation will also

allow for an elevated supply-air temperature to be provided by the cooling system since the mixing of hot

and cold air is eliminated. The HyperPod System can be built using new or existing Schneider Electric

equipment. This containment system is compatible with row, room, or external cooling solutions and

available for cold or hot aisle containment.

This manual is a guide for the basic installation procedures for creating a HyperPod System

Loading Capacities

• End Frames (each): 550 lbs.

• Upper Telescoping Beams (each): 250 lbs.

• Large Cantilever (one side, system quantity is 2): 1500 lbs.

For balance, the load should be applied to both sides of the HyperPod. If Large Cantilevers are

installed on only one side, the max loading rating is 974 lbs.

• Mini Cantilever (one side, system quantity is 6): 200 lbs.

• Total System: 4000 lbs.

HyperPod System Installation2

HyperPod SKU List

This manual includes inventory and installation information for the following assemblies:

FS-FM-1001-B Vertical post (Short) FS-RF-1001-B Roof filler panel set

FS-FM-1002-B Vertical post (Tall) FS-RF-2001-U Simple roof panel, 300mm

FS-FM-2001-B Aisle width beam (4ft) FS-RF-2002-U Simple roof panel, 600mm

FS-FM-3001-B Aisle length beam (8-12ft) FS-RF-2003-U Simple roof panel with cutout, 600mm

FS-FM-4001-B End panel (Short) FS-RF-3001-U Drop roof mounting panel, 300mm

FS-FM-4002-B End panel (Tall) FS-RF-3002-U Drop roof mounting rail, 600mm

FS-FM-5001-B Aisle stop rail (8-12ft) FS-RF-3003-U Drop roof mounting panel, 300mm

FS-RF-3004-U Drop roof mounting rail, 600mm

FS-AC-1001-U Air sealing kit FS-RF-3005-U Drop roof mounting panel, 750mm

FS-AC-2001-U Row length brush strip FS-RF-3006-U Drop roof mounting rail, 750mm

FS-AC-3001-B Large cantilever arms FS-RF-5001-B Overhead duct mounting riser, 8ft.

FS-AC-3002-B Overhead support frame, 8-12ft. FS-RF-5002-B Overhead duct mounting riser, 10ft.

FS-AC-3003-B Mini cantilever arms FS-RF-5003-B Overhead duct mounting riser, 12ft.

FS-AC-4001-B Power raceway end module

FS-AC-4002-B Power raceway main module FS-WI-1001-U Window panel (2ft)

FS-AC-4003-B Power raceway 300mm side cover

pack

FS-WI-1002-B Window rail

FS-AC-4004-B Power raceway 50/150mm side

cover pack FS-WI-1003-B Window frame brush strips

FS-AC-4005-B Power raceway extension module

FS-AC-4006-B Aisle crossover tray FS-DR-1001-B Dual sliding doors

FS-AC-5001-U Full rack blanking panel, 300mm FS-DR-2001-B Door frame

FS-AC-5002-U Full rack blanking panel, 600mm FS-DR-3001-B Swing door

FS-AC-5003-U Full rack blanking panel, 750mm

FS-AC-5004-U Full rack blanking panel, 800mm ACDC2015 Ceiling panel lock system (without power

supply)

FS-AC-6001-B Bracket, lighting kit ACDC2016 Ceiling panel lock system 100-120V (with

power supply)

FS-AC-7001-B Distribution cabinet, MH50 ACDC2017 Ceiling panel lock system 200-240V (with

power supply)

FS-AC-7002-B Distribution cabinet, Split ACDC2018 Lighting kit with power supply

FS-AC-7003-B Distribution cabinet, Solid ACDC2019 Lighting kit without power supply

FS-AC-8001-U Rack height adapter, 300mm

FS-AC-8002-U Rack height adapter, 600mm

FS-AC-8003-U Rack height adapter, 750mm

FS-AC-8004-U Rack height adapter, 800mm

3HyperPod System Installation

Documentation Information

All documentation is also available online at http://www.schneider-electric.com.

Manual updates

Check for updates to this manual on the Schneider Electric Web site, www.schneider-electric.com/

support. Select the Download Documents and Software link under the Support tab and enter the

manual part number or SKU for your equipment in the search field. See the back cover of this manual for

the part number.

Unpacking and Inspecting

IMPORTANT: To avoid misplacing parts, do not leave boxes open following inspections. Reseal the

boxes until those parts are ready to be installed. Follow the order of procedures in this manual to ensure

proper installation.

If damage is noted to the shipping containers, inspect the contents for damage and notify the shipping

carrier and Schneider Electric.

After opening a box, check the components in the box against the list of items in “Component

Identification,” beginning on page . If any components are missing contact Schneider Electric at

http://www.schneider-electric.com/support.

The shipping materials are recyclable. Save them for later use or dispose of them

appropriately.

HyperPod System Installation4

Safety

Important Safety Information

Read the instructions carefully to become familiar with the equipment before trying to install, operate,

service, or maintain it. The following special messages may appear throughout this manual or on the

equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a

procedure.

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death

or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, can result in death

or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, can result in minor

or moderate injury.

NOTICE

NOTICE addresses practices not related to physical injury including certain environmental

hazards, potential damage or loss of data.

5HyperPod System Installation

Safety Recommendations for the HyperPod System

To reduce the possibility of injury or equipment damage, read and follow the safety recommendations.

Follow all local and agency safety requirements.

WARNING

TOOL USAGE HAZARD

Follow safety standards for all hand tools and power tools used. Read and follow the tool

manufacturer’s instructions. Follow the tool manufacturer’s recommendations and recognized

safety requirements for use of Personal Protection Equipment (PPE).

Failure to follow these instructions can result in death, serious injury, or equipment

damage.

CAUTION

WORKING HEIGHT HAZARD

The working height for the assembly process can exceed 2.3 meters (7.5 feet). The use of

stepladders or scaffolding will be required during assembly.

Failure to follow these instructions can result in serious injury or equipment damage.

CAUTION

LIFTING HAZARD

At least two people are required to install this equipment. Some parts may be heavy and/or

excessive in size. For items weighing more than 25 lbs (12 kg), use more than one person.

Failure to follow these instructions can result in serious injury or equipment damage.

CAUTION

NO STEP HAZARD

Ceiling panels are not designed to support weight. Never lean or walk on the ceiling panels.

DO NOT use ceiling panels to support power or data cables.

Failure to follow these instructions can result serious injury or equipment damage.

HyperPod System Installation6

Planning the Installation

NOTE: The data center floor must be within 0.075° from level for an 8-rack configuration, or within 0.035°

from level for a 16-rack configuration.

General guidelines for installation

Maintain a minimum clear space of 36 inches required from the top of the frame to overhead

obstructions.

Maintain a minimum working space around the frame perimeter. Be sure to factor in the depth of the

racks you will install. Use your deepest rack when calculating the outside aisle space around the

HyperPod. (Finished size perimeter + 4 feet around all sides)

Install this equipment directly on a concrete floor.

See the documentation provided with each Schneider Electric product for additional

instructions on installation. All documentation is also available on the Schneider Electric web

site, www.schneider-electric.com.

Enclosures and Power Equipment

Refer to the instructions that come with your enclosures and power distribution equipment for

information on how to install them.

7HyperPod System Installation

Layout and Positioning

Referencing the ISX Designer report, determine the position of the main components, the total length of

the planned Aisle Containment System and the aisle width. Using a chalk line or similar, lay out the

perimeter making sure all corners are square.

* Dimension A will vary depending on the type and number of racks installed (2421mm to 3621mm).

Dimension B is equal to 1100mm. Item C notes the locations of the post feet provided in SKUs FS-FM-

1001-B and FS-FM-1002-B.

Observe a four foot perimeter around the outside so that racks can be moved in and out of the pod

NOTE: A template is provided to assist proper drilling of secure the vertical post holes into the floor to

feet.

90°

acs0020a

HyperPod System Installation8

List of Recommended Tools

Screwdriver

P1 and

P2 Phillips

Screwdriver

T-30, T-20, T-15

TORX

Standard

screwdriver Hex wrench

3 mm, 6 mm

Wrench

6, 7, 8, 10, 11,

13,14, 18, and

19mm

Tape measure Chalk line

Hex socket

6.3 mm, 7 mm,

10 mm, 15 mm Level

Drill with

standard, Phillips,

TORX bits

Rotary tool

(e.g. Dremel®)

T-square

120 cm (48 in.)

minimum Self-retracting knife Miter saw Metal files

T-square Scissors Lift Ladder Drill and concrete

bits

9HyperPod System Installation

Systems Overview

Basic configuration

The Hyperpod™ is a free standing air containment system.

This manual is a guide for the basic installation procedures for assembling a HyperPod System.

Multiple configurations are possible depending on your requirements. Please contact Schneider Electric

at www.schneider-electric.com or your Schneider-Electric representative to explore your options.

HyperPod System Installation10

Component Identification

HyperPod System Components

Item Description Quantity Required

Vertical post 4

Door frame assembly 4

Dual sliding doors 2

4 ft Width beam 4

4ft aisle end cap assembly 2

8 to 12 ft Telescoping length beam assembly 4

4 ft simple roof panel, 600mm 5

4ft simple roof panel, 300mm 2

Window frame brush strips 4

2 ft Window panels (contents two panels) 6

Window rail assembly 2

Row length brush strip assembly 2

600mm Blanking panel *

8 to 12 ft Stop rail assembly 2

Air sealing kit 1

* Quantity determined by number of spaces not inhabited by racks.

acs0036a

Short version shown

11HyperPod System Installation

Vertical Posts

FS-FM-1001-B - Vertical Post Assembly, 2750mm (Short)

FS-FM-1002-B - Vertical Post Assembly, 3200mm (Tall)

NOTE: Fasteners for securing the vertical posts to your floor are not included.

Width Beams

FS-FM-2001-B - Width Beam Assembly, 1200mm

Item Description Quantity

Vertical Post FS-FM-1002-B (Tall) 2

Vertical Post FS-FM-1001-B (Short) 2

Template* 1

Shim (0.5mm thicknesses) 2

Hole plug

FS-FM-1001-B (Short)

FS-FM-1002-B (Tall) 48

Temporary support 1

M8 x 12 T30 Screw 8

*Template for drilling holes into floor to secure vertical posts.

Item Description Quantity

Width Beam, 4 ft aisle 1

M8 x 12 T30 Screw 8



  





acs0002a

 

acs0003a

HyperPod System Installation12

Telescoping Beams

FS-FM-3001-B - Telescoping Beam

Telescoping beams are attached to Front/Rear frame assemblies to form the basic frame.

Item Description Quantity

Telescoping beam end section 2

Telescoping beam center section 2

Telescoping beam end section 2

Self-adhesive foam seal strip 4

M8 Hex nut 4

M6 x 12 Pan head T30 screw 8

M8 x 25 Hex head bolt 4

NOTICE

Telescoping beams are marked to note the 8 and 12 ft lengths.















acs0004a

13HyperPod System Installation

End Cap Panels

FS-FM-4001-B - End Cap Assembly (Short)

FS-FM-4002-B - End Cap Assembly (Tall)

NOTE: Two end cap panel assemblies per HyperPod required.

Item Description Quantity

FS-FM-4001-B



 Interior panel 1



 Exterior panel 1



 M6 x 12 Pan head T30 screw 8



 5mm Hole plug 2



 M8 x 12 Low head Nylok T30 screw 16

FS-FM-4002-B



 End cap panel 2



 M6 x 12 Pan head T30 screw 8



 M8 x 12 Low head Nylok T30 screw 16











acs0040a

HyperPod System Installation14

Door Frame Assembly

FS-DR-2001-B - Standard Door Frame

Item Description Quantity



 Door frame front panel 4



 Door frame rear panel cover 4



 Hole plug, 5mm diameter 25



 M5 x 12 Flat U-cut Phillips head screw 45



 M8 x 12 low head T30 screw 33

 







acs0039a

15HyperPod System Installation

Door and Rail Assembly

FS-DR-1001-B - Door and rail assembly

Item Description Quantity

36 x 4 x 1920mm door side brush 2

Door hanging rail assembly 1

Bracket, Left door to reel 1

Bracket, Right door to dumper 1

Left door panel 1

Right door panel 1

M6 flanged hex nut 9

M6 x 12 Pan head T30 screw 5

M8 x 12 Low head screw 5

M4 x 8 button head Torx screw 10

M3 x 10 Phillips screw 10

M5 x 25 pan head #2 Phillips screw 5

Outside door handle 2

Left door bottom rail 1

Door leveling shim 42 x 30 x 0.6mm 4

Right door bottom rail 1

Key 1











  

  

acs0010a

HyperPod System Installation16

Windows, Rails, and Side Brushes

FS-WI-1001-U - Window Assembly (270 x 600)

FS-WI-1002-B - Window Rail Assembly

FS-WI-1003-B - Window Brush Assembly

Item Description Quantity

Ribbed 5mm Lexan window FS-WI-1001-U 2

M6 x 12 Flat head T30 screw FS-WI-1002-B 18

Rail bracket FS-WI-1002-B 9

Side brush strip FS-WI-1003-B 4

M6 x 10 pan head T30 Screw 26

Long rail bracket FS-WI-1002-B 9

M6 x 12 Pan head T30 screw FS-WI-1003-B 8

Window rail block FS-WI-1002-B 12

Connector with four M6 set screws FS-WI-1002-B 8

M6 Steel hammer head nut FS-WI-1002-B 26

Window rail FS-WI-1002-B 12



  







acs0005a

17HyperPod System Installation

Row length brushes

FS-AC-2001-U

Item Description Quantity

Clip for brush 8

M3 x 4 Pan head Phillips screw 8

M6 insert nut 5

M6 x 16 Pan head T30 screw 17

Self-adhesive foam seal strip 4

Brush strip 4

   





acs0008a

HyperPod System Installation18

Roof Frame Assembly

FS-RF-2001-U - 4ft Aisle Simple Roof Panel, 300mm

FS-RF-2002-U - 4ft Aisle Simple Roof Panel, 600mm

FS-RF-2003-U - 4ft Aisle Simple Roof Panel for Sprinkler Option, 600mm

Item Description Quantity

Roof panel FS-RF-2003-U 1

Roof panel 600mm FS-RF-2002-U 1

Roof panel 300mm FS-RF-2001-U 1

Long roof panel bracket FS-RF-2002-U, FS-RF-2003-U 2

Short roof panel bracket FS-RF-2001-U 2

M6 Insert nut (FS-RF-2001-U, FS-RF-2002-U, FS-RF-2003-U) 4

M6-1 x 16 Hex head screw (FS-RF-2001-U, FS-RF-2002-U, FS-RF-2003-U) 4















acs0006a

21HyperPod System Installation

Seal Kit

FS-AC-1001-U Sealing Kit

Item Description Quantity

Self adhesive foam seal, 10mm x 10mm 12M

acs0057a



23HyperPod System Installation

Installation Procedure Overview

Safety

Read and follow safety instructions.

WARNING

TOOL USAGE HAZARD

Follow safety standards for all hand tools and power tools used. Read and follow the tool

manufacturer’s instructions. Follow the tool manufacturer’s recommendations and recognized

safety requirements for use of Personal Protection Equipment (PPE).

Failure to follow these instructions can result in death, serious injury, or equipment

damage.

CAUTION

WORKING HEIGHT HAZARD

The working height for the assembly process can exceed 2.3 meters (7.5 feet). The use of

stepladders or scaffolding will be required during assembly.

Failure to follow these instructions can result in serious injury or equipment damage.

CAUTION

LIFTING HAZARD

At least two people are required to install this enclosure. Some parts may be heavy and/or

excessive in size. For items weighing more than 25 lbs (12 kg), use more than one person.

Failure to follow these instructions can result in serious injury or equipment damage.

CAUTION

NO STEP HAZARD

Ceiling panels are not designed to support weight. Never lean or walk on the ceiling panels.

DO NOT use ceiling panels to support power or data cables.

Failure to follow these instructions can result serious injury or equipment damage.

HyperPod System Installation24

Customizing the Installation

Installation locations for width beams and telescoping beams

The height of the telescoping beams is selected based on the height of the racks to be installed or your

roof and ducting needs. Determine these requirements prior to assembly of the frame. Once the location

of the lower telescoping beam has been established, the (next) upper beam must be placed at the

correct height to allow for installation of the windows.

NOTICE

• Vertical posts are marked with height notation . (Tall vertical post shown in illustration

above.)

• If 48U or shorter racks are deployed in the tall HyperPod, 6 telescoping beams are required.

If racks are taller than 48U, use 4 telescoping beams.

• Tall HyperPod frames support racks up to 52U.

• Telescoping rails are marked to note 8 and 12 ft lengths .

acs0021a

25HyperPod System Installation

Basic Frame Assembly

Frame end configuration

Assemble vertical posts to width beams (2 width

beams for the Short HyperPod, 3 width beams for

theTall.Hyperpod) using the M8 x 12 Nylock T30

screws provided.

Assemble a second set of vertical posts and width

beams.

NOTE: If needed, the temporary frame support can

be installed to the assembly at this time. See

“Temporary frame support” on page 28 for more

information.

NOTICE

Hole plugs are included with this assembly. It is recommended

to wait until the accessories are installed before installing the

hole plugs.

acs0047a

Short

Tall

HyperPod System Installation26

Telescoping beam assembly

Install the telescoping horizontal beams to the vertical post assemblies.

a. Assemble the beam by sliding the end sections into the main beam. Make sure the bracket

on the end is in the correct position for attaching to the vertical post.

b. Slide the telescoping beam to the desired length. The beam is marked at the 8 and 12 foot

lengths. If the length of your HyperPod will be more than 8 feet but less than 12 feet,

measure and mark the telescoping beams so they can be secured at the appropriate

length.

NOTE: The left and right end inserts of the telescoping beam can each be extended to add

600mm. When both end inserts are fully extended, the total length of the telescoping beam

is 3621mm. When setting up the telescoping beams to the calculated length of the aisle

you need in your HyperPod, make sure that the inserts on both ends of the telescoping

beam are extended the same length.

For example, if the left end insert is extended by 50mm, then the right end insert should

also be extended by 50mm. On tall HyperPods, the upper two telescoping beams are

extended as follows: if the left end insert on one telescoping beam is extended 50mm, then

the right end of the other telescoping beam should be extended 50mm.

acs0144a

acs0064b

acs0145a

27HyperPod System Installation

c. Secure the small beam ends in place with M6 x 12 Pan head T30 screws.

d. Secure the telescoping beams to the vertical posts with four provided M8 x 25 hex head

bolts and M8 nuts at the standard 48U position or the customized position you have

determined for your installation.

e. The end inserts of the telescoping beam are smaller than the main portion of the beam.

Apply the self-adhesive foam seal to the gap on the extensions of the telescoping beam to

fill the space.

acs0012a

acs0064b

HyperPod System Installation28

Temporary frame support

If you are not going to secure the frame to the floor at this time, attach the temporary support to the feet

of the vertical posts with four M8 x 12 T30 screws per post to stabilize the frame while making sure the

frame is level and plumb.

acs0105a

29HyperPod System Installation

Secure the frame to the floor

a. To prepare to secure the frame to the floor, adjust the frame until level and plumb. Use the

supplied shims as necessary. Use the threaded screws to raise the vertical post foot plate

from the floor.

b. Attach the vertical posts at one end to the floor. Do not attach both ends of the frame to the

floor until length is checked to accommodate the intended equipment and the frame is level

and plumb.

acs0064a

acs0048a

HyperPod System Installation30

Install the end caps

Install the end caps (exterior and interior panels) above the door area on the vertical posts. Four M6 x 12

pan head T30 screws are used to install the exterior panel at the top. Use four M8 x 12 low head Nylok

T30 screws for the bottom of the exterior panel and eight M8 x 12 low head Nylok T30 screws to install

each interior panel.

NOTICE

Hole plugs are included with this assembly. It is recommended

to wait until the accessories are installed before installing the

hole plugs.

acs0013a

33HyperPod System Installation

Attach the door hanging case to the frame above the top of the door opening with four M8 x 12 low head

screws.

• Use the shims included with the door hanging case to ensure the hanging case is level, plumb,

and square to the door frame. The door hanging case must clear the door frame an equal

distance on both ends to ensure the doors will move without obstruction.

acs0063a

acs0063b

Shim

35HyperPod System Installation

• Install an M6 hex nut to each threaded post on the two innermost brackets, securing them to the

doors.

• Install the outermost left and right door hanging brackets to the threaded posts on the doors with

the M6 flanged hex nuts.

acs0149a

acs0079a

HyperPod System Installation36

• Pull the end of the cable and attach one end to each of the outermost brackets with one M6 x 8

screw.

• Attach the bottom rails to the doors and secure them to the door frames with the provided M6 x 12

pan head screws.

acs0153a

acs0077a

HyperPod System Installation38

• Adjust the door closure to keep them from slamming by turning the adjustment screw clockwise

slightly to increase the dampening.

acs0156a

39HyperPod System Installation

• Install the cover to the door rail assembly with eight M4 x 8 button head Torx screws..

acs0066a

HyperPod System Installation40

Install frame seals

Attach the self-adhesive foam seal strips from the seal kit to the backs of the door frame where they will

meet the rack or blanking panel and to the inside end caps where they will meet the roof panel.

NOTICE

You may want to wait until a rack, blanking panel, or roof panel is installed in order to place

the frame seals in the optimal locations.

acs0094a

HyperPod System Installation42

NOTE: There are two tracks in the window rail. Alternate tracks when installing the windows.

43HyperPod System Installation

Row length brush installation

Each row length brush has a slide out extension brush on one end. Install the row length brush with the

extension brush end toward the vertical post. The left and right brushes with extension brushes fully

deployed measure12 feet. With the end of each row length brush meeting at the center of the

telescoping beam, slide out each end of the brush strip until it meets the end of the frame.

a. Install the brush extension clips at each end of the telescoping beam with an M6 x 16 pan

head T30 screw.

b. Apply the self-adhesive foam strip to the bottom of the slide out extension of the

telescoping beam.

acs0151a

acs0141a

HyperPod System Installation44

c. Hold the row length brush up to the telescoping beam and note the hole locations. Install

the insert nuts to the bottom of the telescoping beams at the appropriate locations. Install

the brush strip to the bottom of the telescoping beam with the provided M6 x 16 pan head

T30 screws.

d. Insert the top edge of the brush extension into the clip. Secure the brush extension in the

clip with a M3 x 4 pan head Phillips screw.

acs0016a

acs0142a

45HyperPod System Installation

Roof panel installation

Install the roof panels to the top of the horizontal telescoping beams using the insert nuts, hold down

brackets and M6 x 16 hex head screws.

Use the 50mm or 100mm roof filler panels and 4 hex head screws to fill in the extra space at the end of

the aisle, if any. The roof filler panels have slotted holes to allow for adjustment.

acs0022a

acs0012b

HyperPod System Installation46

Stop rails

a. Measure from front to back of the aisle to make sure the stop rails are straight. Dropping a

chalk line will help with installation.

acs0143a

47HyperPod System Installation

b. Install the stop rails to the bottom of the door frames with the Mylar electrical isolation plate

between. Secure the stop rail to the door frame with two M8 x 20 Hex head screws at each

end. Use the slots to adjust the rail in or out. When the stop rails are in the correct position,

secure the extensions to the center rail with the M6 x 10 Pan head T30 screws along the

sides of the rails and use anchor bolts (not provided) to secure the rail assembly along the

edge that sits flush to the floor.

acs0041a

HyperPod System Installation50

Apply the self adhesive seal to the side of the blanking panels.

acs0136a

51HyperPod System Installation

Accessory Kits

End Row Transition Cabinets

FS-AC-7001-B - Distribution Cabinet, MH50

FS-AC-7002-B - Distribution Cabinet, Split

FS-AC-7003-B - Distribution Cabinet, Solid

Item Description Quantity

 Transition cabinet FS-AC-7001-B 1

 M6 x 12 pan head T30 screw 3

 Transition cabinet FS-AC-7002-B 1

 M6 x 12 pan head T30 screw 3

 Transition cabinet FS-AC-7003-B 1

 M6 x 12 pan head T30 screw 3

FS-AC-7001-B FS-AC-7002-B FS-AC-7003-B

acs0078a

HyperPod System Installation52

Drop Roof

FS-RF-3001-U Drop roof panel, 300mm

FS-RF-3002-U Drop roof mounting rail, 300mm

FS-RF-3003-U Drop roof panel, 600mm

FS-RF-3004-U Drop roof mounting rail, 600mm

FS-RF-3005-U Drop roof panel, 750mm

FS-RF-3006-U Drop roof mounting rail, 750mm

Item Description Quantity

Ceiling support assembly 300mm 1

Ceiling support assembly 600mm 1

Ceiling support assembly 750mm 1

Bracket (for 600mm and 750mm panel) 1

M6 Hammer head nut 8

Baying hinge bracket 2

M4 x 8 Torx pan head screw 4

M6 Insert nut 4

M6 p58-x10 Pan head T30 screw 8

M6 x16 Pan head T30 screw 4

Bracket (for 300mm panel) 1

Roof panel 750mm 1

Roof panel 300mm 1

Connector 4

Roof panel 600mm 1

















acs0007a

53HyperPod System Installation

Ceiling Panel Lock Systems

ACDC2016 Ceiling Panel Lock System, 100-120V (with power supply)

ACDC2017 Ceiling Panel Lock System, 200-240V (with power supply)

Item Description Quantity

Dropout power supply control box, 110V (ACDC2016) 1

Dropout power supply control box, 220V (ACDC2017) 1

Bracket for power supply box, left 1

Bracket for power supply box, right 1

M6 × 16 pan head Phillips screw 4

M6 × 12 pan head T30 screw 4

M4 × 8 mm button head T15 screw 6

M6 plastic cup washer 4

M6 channel nut 4

M6 caged nut 4

Wire harness—power supply to wiring box, 3.6m (12 ft.) 1

Across aisle wiring assembly, 4m (13.1 ft.) 2

Alarm beacon 2

Wiring box cover 1

Terminal jumper 1

4-pin jumper 1

Wire tie 55

Cable holder 55

Power cord—CEE22 jump 2M 10A ROHS (ACDC2017) 2

Power cord—6 ft. C13/15 DELL ROHS compliant (ACDC2016) 2

Smoke detector cable 1

Primary Source

Secondary Sour ce

Power Status

Dropout

Alarm 1

Dropout

Alarm 2

EM Lock &

Temperature Switch

Smoke

Detector

na4051a

HyperPod System Installation54

ACDC2015 Ceiling Panel Lock System, (no power supply)

Item Description Quantity

M5 x 8 Flat head Torx Screw 8

M4 x 8 Pan head Torx screw 24

M5 x 10 Flat head Torx screw 4

M4 serrated hex flange nut 8

135F (57C) temperature switch 24VDC 3A 4

Electromechanical lock spacer 4

Electromechanical lock assembly, 24V 50MA 4

Wiring box 4

Box-to-box wire assembly 4

na5222-56

HyperPod System Installation56

Cantilever Support Arms

FS-AC-3001-B - Large Cantilever Support Arms

FS-AC-3003-B - Mini Cantilever Arms

Item Description Quantity

Cantilever Arm 2

M12 x 100 Hex head bolt 4

M12 Hex head nut 4

Item Description Quantity

Leveling pad 2

Mini Cantilever arm 2

M4 x 10 Hex socket bolt 4

M6 x 20 Hex head bolt 4

M6 Insert nut 4





acs0023a



 



acs0027a

HyperPod System Installation60

FS-AC-6001-B - Lighting Bracket Kit

Item Description Quantity

 Left hand rail 2

 Extra rail 8

 M6 x 16 Pan head T30 screw 29

 Right hand rail 2

 M4 x 12 Torx pan head screw 33

 Channel cover 16

acs0073a

63HyperPod System Installation

Installation of Optional Accessories

CAUTION

WORKING HEIGHT HAZARD

The working height for the assembly process can exceed 2.3 meters (7.5 feet). The use of

stepladders or scaffolding will be required during assembly.

Failure to follow these instructions can result in serious injury or equipment damage.

acs0053a

HyperPod System Installation64

Transition Cabinets

Two transition cabinets can be installed at each end of the aisle. One transition cabinet is shown installed

on either side of the door frame in the illustration below.

CAUTION

LIFTING HAZARD

At least two people are required to install this enclosure. Use appropriate equipment to move

cabinets into position.

Failure to follow these instructions can result in serious injury or equipment damage.

NOTICE

Empty transition cabinets can weigh from 215 to 230 lbs. and much more if equipment has

been installed. Consider the weight of your cabinet to choose the appropriate method of

moving the transition cabinets.

acs0116a

HyperPod System Installation66

Move the transition cabinet into position.

CAUTION

LIFTING HAZARD

Transition cabinets are very heavy, The use of mechanical lifting machinery such as a forklift is

recommended

Failure to follow these instructions can result in serious injury or equipment damage.

acs0114a

Especificaciones del producto

Marca:	Apc
Categoría:	No categorizado
Modelo:	FS-AC-6001-B

¿Necesitas ayuda?

Si necesitas ayuda con Apc FS-AC-6001-B haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado Apc Manuales

Apc FS-AC-8002-U Manual de Usario

15 Octubre 2024

Apc EVP1000 Manual de Usario

14 Octubre 2024

Apc Easy Rack Cable Manager Manual de Usario

3 Octubre 2024

Apc Switched Rack PDU Manual de Usario

2 Octubre 2024

Apc 1U Rail Kit Manual de Usario

2 Octubre 2024

Apc E3SXR6 Manual de Usario

21 Septiembre 2024

Apc C2C Manual de Usario

19 Septiembre 2024

Apc AP7868 Manual de Usario

19 Septiembre 2024

Apc P8VNTG Manual de Usario

19 Septiembre 2024

Apc P62 Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024