Argox A-2240M Manual de Usario

Argox Impresora de etiquetas A-2240M

Lee a continuación 📖 el manual en español para Argox A-2240M (47 páginas) en la categoría Impresora de etiquetas. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/47

A SERIE RINTERSP

A-2240, A-2240E, A-2240Z,

A-2240ZE, A-3140, A-3140Z

A-2240M, A-2240ME

User’s Manual

Website: http://www.argox.com

Ribbon & Media Installation video

A Series User’s Manual

Introduction

Proprietary Statement

This manual contains proprietary information of Argox Information Co., Ltd. It is

intended solely for the information and use of parties operating and maintaining

the equipment described herein. Such proprietary information may not be used,

reproduced, or disclosed to any other parties for any other purpose without the

expressed written permission of Argox Information Co., Ltd.

Product Improvements

Continuous improvement of products is a policy of Argox Information Co., Ltd. All

specifications and signs are subject to change without notice.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that the interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment into a different outlet on a different circuit.

 Consult the dealer or an experience Radio/TV technician for help.

This unit was tested with shielded cables on the peripheral devices. Shielded

cables must be used with the unit to insure compliance. The user is cautioned

that any changes or modifications not expressly approved by Argox Information

Co., Ltd. could void the user’s authority to operate the equipment.

Liability Disclaimer

Argox Information Co., Ltd. takes steps to assure that the company’s published

engineering specifications and manuals are correct; however, errors do occur.

Argox Information Co., Ltd. reserves the right to correct any such errors and

disclaims any resulting liability. In no event shall Argox Information Co., Ltd. or

A Series User’s Manual

anyone else involved in the creation, production, or delivery of the

accompanying product (including hardware and software) be liable for any

damages whatsoever (including, without limitation, damages for loss of business

profits, business interruption, loss of business information, or other pecuniary

loss) arising out of the use of or the results of use of or inability to use such

product, even if Argox Information Co., Ltd. has been advised of the possibility of

such damages.

CAUTION:

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Safety

INDUSTRY CANADA NOTICE:

This device complies with Industry Canada ICES-003 class A requirements.

Cet equipement est conforme a ICES-003 classe A de la norm Industrielle

Canadian.

Supplemental Information: This device complies with the

requirement of FCC Part 15 Rules. Operation is subject to the

following two Conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Please only use adapters with the following electrical characteristics and

are certified by current legislation. Using other adapters may damage the

device and void the warranty also cause risks to the user.

Features Output: 24VDC, 2.4A

The manufacturer declares under sole responsibility that this product

conforms to the following standards or other normative documents:

EMC: EN 2010 Class A

EN 55024:2010

A Series User’s Manual

Argox Information Co., Ltd certifies that the following products and/or

components are compliant with the current requirements of the European

Union Restriction on the use of Hazardous Substances (RoHS) Directive,

2011/65/EC.

A Series User’s Manual

Table of Contents

Introduction................................................................................. 2

Proprietary Statement ............................................................. 2

Product Improvements............................................................ 2

FCC Compliance Statement ................................................... 2

Liability Disclaimer.................................................................. 2

Safety ..................................................................................... 3

Getting Started............................................................................ 7

Unpacking............................................................................... 7

Package Contents............................................................................. 8

Connecting the Power Supply................................................. 9

Getting to Know Your Printer..................................................... 12

Parts and Features ............................................................... 12

Controls and Indicators......................................................... 14

Loading Ribbon and Media....................................................... 16

Loading a Ribbon.................................................................. 16

Loading Media...................................................................... 21

Standard Mode................................................................................21

Peel Off Mode..................................................................................26

Cutter Mode.....................................................................................31

Configuration and Configuration ............................................... 39

Performing Calibration and a Configuration Report............... 39

Resetting Printer to Factory Defaults .................................... 41

Sensor Detection .................................................................. 42

Detection Area of the Transmissive Sensor (edge)......................42

Detection Area of the Transmissive Sensor (centre)....................43

Detection Area of the Reflective Sensor .......................................44

Computer Connections............................................................. 45

USB Interface Requirements ................................................ 45

Serial (RS-232) Interface Requirements ............................... 46

Serial Cabling Requirements ................................................ 46

Ethernet 10/100 Internal Printer Server Option ..................... 48

Communicating with the Printer ................................................ 50

Installing a Plug and Play printer driver (for USB only).......... 51

Installing the Printer Driver.................................................... 58

A Series User’s Manual

Troubleshooting ........................................................................70

LED Diagnosis ......................................................................70

Miscellaneous .......................................................................73

Recovery...............................................................................74

Caring for Your Printer...............................................................75

Cleaning................................................................................75

Media Sensor..................................................................................75

Thermal Print Head......................................................................... 75

Replacing Thermal Print Head ..............................................78

Technical Reference.................................................................81

General Specifications ..........................................................81

Fonts, Bar Codes and Graphics Specification .......................84

Printer Programming Language A, PPLA .................................... 84

Printer Programming Language B, PPLB .................................... 85

Printer Programming Language Z, PPLZ..................................... 86

Interface Specifications .........................................................87

USB Interface..................................................................................87

Serial ................................................................................................88

Ethernet ...........................................................................................89

Connection with host ...................................................................... 90

Appendix I - Installing the Extension Card.................................92

Especificaciones del producto

Marca:	Argox
Categoría:	Impresora de etiquetas
Modelo:	A-2240M
Tipo de operación:	Knoppen
Color del producto:	Roestvrijstaal
Pantalla incorporada:	Nee
Peso.:	12500 g
Ancho:	595 mm
Profundidad:	500 mm
Altura:	560 mm
Nivel de ruido:	60 dB
Clase-de-eficiencia-energética:	D
Consumo-anual-de-energía:	60 kWu
Peso del embalaje:	14500 g
Amable:	Muurmontage
Diámetro de la conexión de escape:	150 mm
Número de motores:	1
Material de la carcasa:	Roestvrijstaal
Capacidad máxima de extracción:	435 m³/uur
Método de extracción:	Luchtafvoer
Clase de eficiencia fluidodinámica:	F
Clase de eficiencia lumínica:	A
Clase de eficiencia del filtro de grasa:	B
Tipo de lámpara:	LED
Altura (mín.):	560 mm
Lámpara de encendido:	2 W
Número de velocidades:	3
modo intensivo:	Nee
Altura sin chimenea:	535 mm
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Escala de eficiencia energética:	A+++ tot D