ATen KA9140 Manual de Usario

Lee a continuación 📖 el manual en español para ATen KA9140 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
Package Contents
1
This Quick Start Guide briefly describes how to install and operate the KA9140 Serial
CPU Module with ATEN's PS/2 or Matrix type KVM Switch.
The complete package consists of:
• 1 KA9140
• 1 Power Adapter
• 1 Rack Mount Kit
• 1 Firmware Upgrade Cable
2Hardware Overview
1. Link (Green) LED
2. Power (Orange) LED
3. Link Port
4. Console Port
5. Serial Terminal Port
6. Firmware Upgrade Port
7. Firmware Upgrade Switch
For RJ45 Matrix Type KVM:
1. If you have a Matrix type KVM, simply plug one end of a RJ45 cable into any available
CPU port on your KVM switch and plug the other end into the RJ45 Link Port on your KA9140.
2. Plug one end of a standard 9 pin serial cable into the Terminal Port on your KA9140 and
the other end into the serial port on your VT-100 terminal.
3. Plug the Power Adapter into a wall socket, then plug the cord end into the Power Jack on
your KA9140.
4. Use Hotkeys to configure the port settings.
For PS/2 Type KVM:
1. If you have a PS/2 type KVM, plug one end of a standard 15 pin VGA to VGA cable into
any available CPU VGA port on your KVM then plug the other end into the VGA Console Port
on your KA9140.
2. Plug one end of a standard PS/2 to PS/2 cable into a matching PS/2 Keyboard on your
KVM then plug the other end into the Keyboard Console Port on your KA9140.
3. Plug one end of a standard 9 pin serial cable into the Terminal Port on your KA9140 and
the other end into the serial port on your VT-100 terminal.
4. Plug the Power Adapter into a wall socket, then plug the cord end into the Power Jack on
your KA9140.
5. Use Hotkeys to configure the port settings.
PS/2 KVM Switch
VT-100
KVM Console
KA9140
Firmware Upgrade Utility
5
The KA9140's firmware can be upgraded via a cable connection to a computer. Follow the steps
listed below if you need to upgrade:
Matrix KVM Switch
VT-100
KVM Console
KA9140
5. Run the self extracting firmware upgrade file. The
instructions are self explanatory.
6. The main screen will display all the devices that
are detected and can be upgraded.
7. If you check the Check Firmware Version box,
The upgrade utility will check to see if the firmware
version is newer than what is already embedded.
8. If the file is newer, follow the instructions on the
screen. If not, you will be prompted with a warning
message and instructed to continue or exit.
9. If you continue, the firmware will be
reprogrammed and if successful, will prompt you
with a Upgrade Successful message.
10. If you receive a Upgrade Failed message, you
should check all the connections and repeat the
upgrade procedure from the beginning.
1. From any computer that is not part of your KVM installation, go online to the
www.aten.com website and download the latest Firmware Upgrade for your KA9140.
2. Power off and unplug the KA9140 from your KVM and connect it to your computer with
the included Firmware Upgrade Cable. Plug one end into the Firmware Upgrade Port on your
KA9140 and the other end to a serial port on your computer.
3. Slide the Firmware Upgrade Switch to the UPGRADE position.
4. Power On your KA9140.
License Agreement
Firmware Upgrade Utility
Note: the video resolution depends on the Terminal. The recommended resolutions are
800 x 600 @ 60 Hz for 80 characters per line and 1152 x 864 @ 75 Hz for 132
characters per line. Flow control (Xon/Xoff or Hardware) is also determined by your
terminal.
* default
• 4 Foot Pads
• 1 User Instructions
3Hardware Installation
You will need:
At least one KVM Switch and one VT-100 compatible Terminal
• 1 standard 9 pin RS-232 serial to serial interface cable
• 1 RJ45 cable (max 150m) for Matrix type KVM
• 1 standard PS/2 to PS/2 cable for PS/2 type KVM
• 1 standard 15 pin VGA to VGA cable for PS/2 type KVM
Configuration
4
Use keyboard hotkey combinations to configure your port settings. Press the [ALT] key twice to
invoke Hotkey Mode. A prompt will appear on your screen with your current settings. Press any
Hotkey below tochange your settings. Whendone, press the[ESC]or spacebar to save and exit.
[A]: Config
[A] 9600 bps baud rate*
[B] 19200 bps baud rate
[C] 38400 bps baud rate
[D] 57600 bps baud rate
[E] 115200 bps baud rate
[F] Parity None*
[G] Parity Even
[H] Parity Odd
[I] 8 bit data*
[J] 7 bit data
[K] 2 stop bits
[L] 1 stop bit*
[B]: Background Color
[A] Black*
[B] Red
[C] Green
[D] Yellow
[E] Blue
[F] Magenta
[G] Cyan
[H] White
[C]: Language
[A] English*
[B] French (reserved)
[C] German (reserved)
[D]: Restore Default Value
6Specifications
* All specifications are subject to change without notice.
Function KA9140
Connectors
Computer SideRS-232 1 x DB-9 Female
Console Side
Link1 x RJ-45 Female
Keyboard 1 x Min Din Female
VGA 1 x HDB-15 Female
Upgrade1 x Earphone-jack-4 Female
LEDs Power 1 (Orange)
Link1 (Green)
Switch (Normal / Upgrade) 1 x 2 way slide switch
Power Consumption DC 5V 1.5W
Environment
Operating Temp. 0˚ -50˚C
Storage Temp. -20˚ -60˚C
Humidity 0-80% RH, Non-condensing
Physical
Properties
Housing Metal
Weight 0.50 kg
Dimensions ( L x W x H )20.00 x 8.00 x 3.50 cm
1 2
3 5 6 74
KA9140 Serial CPU Module
Quick Start Guide
All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior
notification by the manufacturer. Please visit our website http://www.aten.com/download/?cid=dds for the most up-to-date versions.
Online Registration
• http://eservice.aten.com
Technical Phone Support
International:
• 886-2-8692-6959
China:
• 86-10-5255-0110
Japan:
• 81-3-5615-5811
Korea:
• 82-2-467-6789
North America:
• 1-888-999-ATEN Ext: 4988
United Kingdom:
• 44-8-4481-58923
ATEN Altusen
© Copyright 2015 ATEN® International Co., Ltd. www.aten.com
Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant PAPE-1214-D00G Printing Date: 01/2015

Especificaciones del producto

Marca: ATen
Categoría: No categorizado
Modelo: KA9140

¿Necesitas ayuda?

Si necesitas ayuda con ATen KA9140 haz una pregunta a continuación y otros usuarios te responderán




No categorizado ATen Manuales

ATen

ATen CL5708 Manual de Usario

17 Septiembre 2024
ATen

ATen CS782DP Manual de Usario

17 Septiembre 2024
ATen

ATen KL1516Ai Manual de Usario

17 Septiembre 2024
ATen

ATen CE680 Manual de Usario

17 Septiembre 2024
ATen

ATen CS261 Manual de Usario

17 Septiembre 2024
ATen

ATen CS1914 Manual de Usario

17 Septiembre 2024
ATen

ATen CS1922 Manual de Usario

17 Septiembre 2024
ATen

ATen CS1944DP Manual de Usario

17 Septiembre 2024
ATen

ATen CS1924M Manual de Usario

17 Septiembre 2024
ATen

ATen UCE3250 Manual de Usario

17 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales