Atlona AT-VTP-800 Manual de Usario

Atlona No categorizado AT-VTP-800

Lee a continuación 📖 el manual en español para Atlona AT-VTP-800 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

Installation Guide

AT-VTP-800

Velocity 8” Touch Panel

AT-VTP-800

1 x AT-VTP-800

1 x Metal mounting plate

4 x Mounting screws

1 x Wall installation template

1 x 2-gang mud ring

1 x Installation Guide

Package Contents

Operating Notes

• The Velocity 8” Touch Panel (AT-VTP-800) must be on the same network as the Velocity

Gateway (AT-VGW-HW) or it will be unable to sync for control.

• The AT-VTP-800 is PoE capable, to power the unit, simply plug it into a 802.3at compatible

network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)

can be used.

IMPORTANT: Velocity Gateway (AT-VGW-HW) must be set up before the AT-VTP-800 is

fully functional.

The Atlona AT-VTP-800-BL and AT-VTP-800-WH are 8” touch panels in black and white,

respectively, for the Atlona Velocity™ Control System. They feature contemporary, rened styling

for modern presentation environments with 1280x800 native resolution, and a capacitive glass

surface that supports multi-touch and gesture interactions. These touch panels conveniently

install into a wall or furniture via a US two-gang opening. Also available is the optional AT-VTP-

TMK tabletop mounting kit for placement on a meeting table or lectern. The VTP-800-BL and

VTP-800-WH feature Power over Ethernet (PoE), enabling a single network connection for data

and power. Setting up the touch panels is eortless as the AV control GUI is automatically

uploaded from the Velocity Control Gateway processor during system conguration.

Installation Guide

AT-VTP-800

The AT-VTP-800 has two mounting options. In-wall or an optional stand (available through atlona.

com).

Mounting Instructions

In-wall

1 Use the included wall mount template to create a hole in the wall the correct 2-Gang size for

the unit.

2 Install the back box (not included) or mud ring (included) into the wall.

3 Screw the included metal mounting plate into the mud ring using the 4 included screws.

4 Remove the two screws from the bottom of the touch panel.

5 Run the Ethernet cable through the mud ring and metal mounting plate.

6 Connect the Ethernet and/or power cable into the back of the touch panel.

7 Line up the touch panel with the mounting plate and thread the metal hooks into the four

holes on the back of the panel.

8 Gently press the touch panel down to ensure it is fully seated on the mounting plate.

9 Replace the two bottom screws to secure the touch panel to the metal mounting plate.

Installation Guide

AT-VTP-800

Stand

1 Place the stand on the table/desk

a If the rubber no slip guard is not secure enough, use four wall screws and thread them

though the four holes on the bottom of the unit and into the desk/table.

2 Thread the Ethernet cable through the bottom rounded hole on the back of the stand and

back out the rectangular hole on the front of the stand.

3 Plug the Ethernet cable into the back of the touch panel.

4 Place the touch panel on the stand, pushing the excess cable back through the stand at the

same time as resting the back panel of the touch panel in the rectangular front hole of the

stand.

5 Secure the touch panel to the stand using the four stand screws (included in the stand box).

a Thread the screws through the 4 pre-drilled holes in the front of the stand into the four

screw holes on the back of the touch panel.

NOTE: Tight the screws by hand. To avoid damage to the touch panel, do not

overtighten.

Installation and Set Up

1 Connect the Ethernet cable into the back of the unit.

a If the Ethernet cable is connected to a non PoE switch, use a PoE injector using 802.3at

(purchased separately).

2 Secure the unit in either the wall or optional stand, as explained in the mounting instructions.

3 The Velocity logo will display during the booting process and will go directly into setup.

Press to start the setup process.CONTINUE

NOTE: Installation of the Velocity Touch Panel can only be done after the VGW-HW

has been set up. View the AT-VGW-HW Installation Guide and Velocity Manual for

instructions.

Especificaciones del producto

Marca:	Atlona
Categoría:	No categorizado
Modelo:	AT-VTP-800
Color del producto:	Zwart
Peso.:	300 g
Ancho:	95 mm
Profundidad:	70 mm
Altura:	26 mm
Peso del embalaje:	350 g
Ancho del embalaje:	130 mm
Empaquetadura en profundidad:	250 mm
Altura del embalaje:	55 mm
Indicadores LED:	Activity, Link, Power, Status
Actual:	1 A
Tecnología de conectividad:	Bedraad
Incluye adaptador de CA:	Ja
País de origen:	China
Código arancelario comercial del Reino Unido:	85176200
Conexión para adaptador de red:	Ja
Voltaje de entrada:	5 V
LAN Ethernet, velocidades de transferencia de datos:	100 Mbit/s
Interno:	Nee
Longitud de onda:	1310 nm
Adaptación externa:	Ja
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Fast Ethernet
Velocidad máxima de transferencia de datos:	100 Mbit/s
Alimentación a través de Ethernet (PoE):	Nee
Altura del paquete principal (exterior):	254 mm
Ancho del embalaje principal (exterior):	394 mm
Peso bruto del embalaje principal (exterior):	7000 g
Longitud del paquete principal (exterior):	550 mm
Cantidad por caja principal (exterior):	20 stuk(s)
Rango-maximo:	20000 m
Ratio de transferencia:	100 Mbit/s
Consumo de energía (típico):	3.5 W
Temperatura de funcionamiento (TT):	-10 - 55 °C
Código del Sistema Armonizado (SA):	85176990
Contenido del embalaje principal (exterior):	55041.8 cm³
Volumen de embalaje:	1787.5 cm³
conector de fibra óptica:	SC
Diámetros de cable de fibra admitidos:	8.3/125,8.7/125,9/125,10/125,50/125,62.5/125,100/140 µm
Interfaz de entrada del convertidor:	100BASE-FX
Interfaz de salida del convertidor:	100Base-FX
Puertos de canal de fibra:	2
Estructura de modo de cable:	Multi-mode, Single-mode
Tecnología de cableado de fibra ethernet:	100BASE-FX