Audac MBK300S Manual de Usario

Audac Vocero MBK300S

Lee a continuación 📖 el manual en español para Audac MBK300S (5 páginas) en la categoría Vocero. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
1
MBK300S Installation Manual
COMPONENTS
MBK310 FX Series y frame
MBK315 Side board set for FX3.15
MBK320 Connection board set 20°-6
1x
2x
2x
FX3.15 Loudspeaker cabinet
(not included with MBK300S) 1x
Bow shackle 1.5ton
(not included with MBK300S, to be sourced locally because
of local legislation)
1x
Steel safety wire Ø 8 mm - 3250 mm
(not included with MBK300S, to be sourced locally because
of local legislation)
1x
ISO 4762 - M10 x 20 mm + DIN 7980 - M10 8x +
MBK300S Installation Manual
2
IMPORTANT SAFETY INSTRUCTIONS
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
Read these instructions and keep them. Never throw them away
Heed all safety warnings
Follow all instructions
Personnel qualication
Installation and set-up should only be carried out by qualied personnel that are familiar
with rigging techniques and safety recommendations that are outlined in this manual.
System parts and rigging instruction
All system components must be inspected before use, in order to detect any possible
defects. Any part showing any sign of defect must immediately be put aside and with-
drawn from use to be inspected by qualied service personnel.
Additional rigging equipment
Only use rigging and mounting accessories which are specied by the manufacturer of
this mounting bracket. It is the users responsibility to ensure that the working load limit
of additional accessories is greater than the total weight of the loudspeaker assembly.
Suspension points
It is the users responsibility to ensure that the suspension points can support the total
weight of the loudspeaker assembly.
Local regulations
Some countries require higher safety factors and rigging approvals. Always follow the
local regulations, even if otherwise specied in this instruction manual. It is the users
responsibility to guarantee that all mountings and connections are made in accordance
with all applicable local regulations.
Flying a loudspeaker assembly
Always ensure that nobody is standing underneath the loudspeaker assembly when it is
being raised. Never leave the system unattended during the installation process.
Dynamic load
When a loudspeaker assembly is deployed in an open air environment, wind e󰀨ects
should be taken into account. Wind can produce dynamic stress to the bracket compo-
nents and suspension points.
Periodic inspection
If all the system components are inspected and approved before use and installed as
described in this manual, they will remain fully operational over the systems lifetime.
However, an annual system inspection of the system and especially the suspension
points shall be performed by qualied personnel to check for any defects caused by
external inuences.
CE DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and
further relevant specications described in following directives:
2006/42/EC Machinery directive
3
MBK300S Installation Manual
PROCEDURE
1Remove the U-proles from FX3.15 cabinet at both sides. Keep the bolts nearby because you will need them in
step 2.
2Mount the FX3.15 side plates to the FX3.15 cabinet. You can use the bolts that were removed in step 1.

Especificaciones del producto

Marca: Audac
Categoría: Vocero
Modelo: MBK300S

¿Necesitas ayuda?

Si necesitas ayuda con Audac MBK300S haz una pregunta a continuación y otros usuarios te responderán




Vocero Audac Manuales

Vocero Manuales

Últimos Vocero Manuales