Audac WS524 Manual de Usario

Audac Speaker WS524

Lee a continuación 📖 el manual en español para Audac WS524 (4 páginas) en la categoría Speaker. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
PROFESSIONAL AUDIO EQUIPMENT
In-Wall Speaker WS524
Installation Guide
In-
W
all
Speaker
WS524
AUDAC
1
Installation Procedure
1) Cut a hole in the ceiling or wall on the desired mounting location of the loudspeaker. This should be a
square with the following dimensions: 147mm x 147mm. The included cutout template can be used
for marking.
2) Provide the loudspeaker connection cable through the mounting hole.
3) Take the loudspeaker, and remove the front grill.
The front grill can be removed by rotating the mounting clips outwards and pushing them down. The
fixing screws will push the front grill out.
4) Pull the mounting clips up again, and rotate them inwards, making the speaker fit through the
mounting hole in the ceiling.
2
5) Connect the loudspeaker connection cable with the power tap connection block. On this connection
block, several connections can be made for different power taps. Depending of the desired power,
connections can be made for 8 Ohm Low impedance application, or 24 Watt / 12 Watt / 6 Watt for
100 Volt applications.
Press the locking mechanism of the desired power tap down, and insert the connection cable. After
releasing the locking mechanism, the speaker connection cable is connected to the loudspeaker or
transformer.
Always connect the common of the amplifier output to the C terminal, and the positive amplifier
output to the desired terminal. (8 For low impedance applications and the desired power terminal for
100 Volt applications).
6) Once the connections are made, the loudspeaker can be installed in the provided mounting hole. Insert
the speaker in the provided mounting hole, and use a screwdriver for tightening the fixing screws.
Once the screws are tightened by a quarter turn, the mounting clip will rotate outwards and will be
locked behind the ceiling. From this moment, the loudspeaker cannot fall out the ceiling. To make the
speaker equal with the ceiling, the fixing screws should be tightened.
7) Once the mounting screws are tightened, the front grill can be assembled to the loudspeaker.
On locations where high vibrations may occur, it is recommended to push the included small rubber
pieces into the groove where the grill fits in. This small rubber pieces makes sure that the grill won’t
come out by vibrations.

Especificaciones del producto

Marca: Audac
Categoría: Speaker
Modelo: WS524

¿Necesitas ayuda?

Si necesitas ayuda con Audac WS524 haz una pregunta a continuación y otros usuarios te responderán




Speaker Audac Manuales

Audac

Audac CENA8 Manual de Usario

12 Septiembre 2024
Audac

Audac TRM248 Manual de Usario

12 Septiembre 2024
Audac

Audac MBK300S Manual de Usario

12 Septiembre 2024
Audac

Audac HS208 Manual de Usario

12 Septiembre 2024
Audac

Audac SSP500 Manual de Usario

12 Septiembre 2024
Audac

Audac CIRA7 Manual de Usario

12 Septiembre 2024
Audac

Audac MBK302S Manual de Usario

12 Septiembre 2024
Audac

Audac TRM224 Manual de Usario

12 Septiembre 2024
Audac

Audac MBK112V Manual de Usario

12 Septiembre 2024
Audac

Audac HS212T Manual de Usario

12 Septiembre 2024

Speaker Manuales

Últimos Speaker Manuales

OSD Audio

OSD Audio LS2 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-205 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-2668 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR-L Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1120W Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-105 Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1110W Manual de Usario

19 Septiembre 2024
AXESS

AXESS SPBT1031 Manual de Usario

18 Septiembre 2024