Auray SS-WM19-TLA2 Manual de Usario

Auray No categorizado SS-WM19-TLA2

Lee a continuación 📖 el manual en español para Auray SS-WM19-TLA2 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
Wall Mount Speaker Bracket
with Tilt, Length, and Angle Adjustment (Pair)
SS-WM19-TLA2
Owners Manual
Owner’s Manual SS-WM19-TLA2
Thank you for choosing Auray.
The heavy-duty Auray SS-WM19-TLA2 wall-mount
brackets feature all-steel construction and are built to hold
PA speakers with 1-inch holes. The rugged wall-mount
design will hold speakers up to 88 pounds and allow
you to adjust the arm length, angle, and tilt for optimum
speaker placement. The arm length adjusts from 12 to 19
inches to accommodate a wide range of speaker depth. An
integrated safety pin and chain provide extra security for
your mounted speakers. Five-point wall brackets attach
to any at surface and provide exible speaker placement
options for venues like clubs, theaters, and function halls.
Please read and follow these
instructions, and keep this
manual in a safe place.
Handle the unit with care.
Clean the unit with
only a soft, dry cloth.
Make sure everything is
secure before proceeding.
Do not exceed the
maximum load capacity.
All images are for
illustrative purposes only.
!
!
!
!!
Precautions
Owner’s Manual SS-WM19-TLA2
1. Use the wall plate to mark the position of the mounting
holes on the wall.
2. Drill holes in the marked locations. Make appropriately
sized holes for the wall anchors, molly bolts, or toggle
bolts. If youre using wall anchors, tap the anchors into
the holes.
Note: Many wall anchors and molly bolts are self-
tapping and dont require a drill for installation.
3. Put the plate against the
wall, and insert screws
(for wall anchors), molly
bolts, or toggle bolts
through the holes, and
fasten them until theyre
fully tightened, and the
wall bracket is secure.
Note: When screwing
the plate directly into
a wall stud, make sure
at least two screws are
attached to the stud.
Mounting Instructions

Especificaciones del producto

Marca: Auray
Categoría: No categorizado
Modelo: SS-WM19-TLA2

¿Necesitas ayuda?

Si necesitas ayuda con Auray SS-WM19-TLA2 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Auray Manuales

No categorizado Manuales

Últimos No categorizado Manuales