Autel MaxiSys MS908S Manual de Usario

Autel No categorizado MaxiSys MS908S

Lee a continuación 📖 el manual en español para Autel MaxiSys MS908S (114 páginas) en la categoría No categorizado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/114

Trademarks

Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and MaxiCheck®

are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United

States and other countries. All other marks are trademarks or registered trademarks of

their respective holders.

No part of this manual may be reproduced, stored in a retrieval system or transmitted, in

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise

without the prior written permission of Autel.

Disclaimer of Warranties and Limitation of Liabilities

All information, specications and illustrations in this manual are based on the latest

information available at the time of printing.

Autel reserves the right to make changes at any time without notice. While information of

this manual has been carefully checked for accuracy, no guarantee is given for the

completeness and correctness of the contents, including but not limited to the product

specications, functions, and illustrations.

Autel will not be liable for any direct, special, incidental, indirect damages or any economic

consequential damages (including lost prots).

IMPORTANT

Before operating or maintaining this unit, please read this manual carefully, paying extra

attention to the safety warnings and precautions.

For Services and Support:

pro.autel.com

www.autel.com

1-855-288-3587/1-855-AUTELUS (North America)

0086-755-86147779 (China)

support@autel.com

For details, please refer to the in this manual. Service Procedures

Safety Information

For your own safety and the safety of others, and to prevent damage to the device and

vehicles upon which it is used, it is important that the safety instructions presented

throughout this manual be read and understood by all persons operating or coming into

contact with the device.

There are various procedures, techniques, tools, and parts for servicing vehicles, as

well as in the skill of the person doing the work. Because of the vast number of test

applications and variations in the products that can be tested with this equipment, we

cannot possibly anticipate or provide advice or safety messages to cover every

circumstance. It is the automotive technician s responsibility to be knowledgeable of the ’

system being tested. It is crucial to use proper service methods and test procedures. It

is essential to perform tests in an appropriate and acceptable manner that does not

endanger your safety, the safety of others in the work area, the device being used, or

the vehicle being tested.

Before using the device, always refer to and follow the safety messages and applicable

test procedures provided by the manufacturer of the vehicle or equipment being tested.

Use the device only as described in this manual. Read, understand, and follow all

safety messages and instructions in this manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment damage.

All safety messages are introduced by a signal word indicating the hazard level.

DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury to the operator or to bystanders.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury to the operator or to bystanders.

Safety Instructions

The safety messages herein cover situations Autel is aware of. Autel cannot know,

evaluate or advise you as to all of the possible hazards. You must be certain that any

condition or service procedure encountered does not jeopardize your personal safety.

DANGER

When an engine is operating, keep the service area WELL VENTILATED or attach a

building exhaust removal system to the engine exhaust system. Engines produce

iii

carbon monoxide, an odorless, poisonous gas that causes slower reaction time and

can lead to serious personal injury or loss of life.

Do Not Turn the Volume Up Too Loud When Using Headphones

Listening at high volumes that over-stimulate the ear for long periods of time may result

in loss of hearing.

SAFETY WARNINGS:

⚫ Always perform automotive testing in a safe environment.

⚫ Wear safety eye protection that meets ANSI standards.

⚫ Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot

engine parts.

⚫ Operate the vehicle in a well-ventilated work area, for exhaust gases are

poisonous.

⚫ Put the transmission in PARK (for automatic transmission) or NEUTRAL (for

manual transmission) and make sure the parking brake is engaged.

⚫ Put blocks in front of the drive wheels and never leave the vehicle unattended

while testing.

⚫ Be extra cautious when working around the ignition coil, distributor cap, ignition

wires and spark plugs. These components create hazardous voltages when the

engine is running.

⚫ Keep a re extinguisher suitable for gasoline, chemical, and electrical res nearby.

⚫ Do not connect or disconnect any test equipment while the ignition is on or the

engine is running.

⚫ Keep the test equipment dry, clean, free from oil, water or grease. Use a mild

detergent on a clean cloth to clean the outside of the equipment as necessary.

⚫ Do not drive the vehicle and operate the test equipment at the same time. Any

distraction may cause an accident.

⚫ Refer to the service manual for the vehicle being serviced and adhere to all

diagnostic procedures and precautions. Failure to do so may result in personal

injury or damage to the test equipment.

⚫ To avoid damaging the test equipment or generating false data, make sure the

vehicle battery is fully charged and the connection to the vehicle DLC is clean and

secure.

⚫ Do not place the test equipment on the distributor of the vehicle. Strong

electro-magnetic interference can damage the equipment.

Especificaciones del producto

Marca:	Autel
Categoría:	No categorizado
Modelo:	MaxiSys MS908S
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Touch
Color del producto:	Black, Stainless steel
Pantalla incorporada:	Ja
Peso.:	2800 g
Ancho:	255 mm
Profundidad:	260 mm
Altura:	245 mm
Activos:	1200 W
Termostato ajustable:	Ja
Temperatura (máx.):	190 °C
Material:	Roestvrijstaal
Tipo de construcción:	Enkel
Contenido:	2.5 l
Capacidad freidora:	0.8 kg
Función de freír:	Ja
Función de horneado:	Ja
Horas digitales:	Ja
voltaje-de-entrada-de-CA:	230 V
Tipo-producto:	Frituurpan
Dimensiones de la cesta (AnxPrxAl):	170 x 155 x 90 mm