AXESS 99-3028S Manual de Usario

Lee a continuación 📖 el manual en español para AXESS 99-3028S (40 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/40
I N S TA L L AT I O N I N S T R U C T I O N S
99-3028S
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 1/30/23 INST99-3028S
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted silver to match the factory finish
Repurposes the factory climate knobs for a factory look and feel
Includes an Axxess interface, wiring harness, and antenna adapter
KIT COMPONENTS
• A) Radio trim panel (with preassembled circuit board) • B) Radio brackets
• C) PocketD) #4 x 3/8” Phillips pan-head screws (8)
• E) #8 x 3/8” Phillips truss-head screws (4) • F) Axxess interface and wiring (not shown) • G) Antenna adapter (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips #1 screwdriver
• Phillips #2 screwdriver • 9/32” socket wrench
• T-20 Torx screwdriver • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Preparation ................................................... 4-7
Kit Assembly
–ISO DIN radio provision with pocket ..................8
–ISO DDIN radio provision .....................................8
Axxess Interface Installation ............................9-19
Final Assembly ......................................................15
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface included
Antenna Adapter: Included with kit
Steering wheel control interface: Included with kit
Backup camera retention: BACKUPCAM-2 (sold sep.)
Personalization Menu LCD: AX-LCD (sold sep.)
A B C D E
Chevrolet Camaro 2010-2015
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
For vehicles without UMQ gauge panel,
unsnap and remove shifter trim panel
and skip to step 8.
1. Unclip and remove the (2) side trim
panels running the length of the center
console. (Figure A)
2. Remove (1) Phillips screw from each
side of the front of the center console.
(Figure B)
3. Remove (2) Phillips screws per side
from the cover on the back of the center
console then unclip and remove the
cover. (Figure C)
(Figure D)(Figure A)
(Figure E)(Figure B)
(Figure F)(Figure C)
2
19
180
3
30
0
30
70 9
12
19
180
200
320
300
30
100
0
30
70 9
12
19
180
200
320
30
100
DASH DISASSEMBLY
4. Remove (2) Phillips screws exposed
under the cover on the back of console.
(Figure D)
5. Remove gauge cluster/trim panel
around shifter. (Figure E)
6. Auto transmission vehicles only:
Remove one T-20 Torx screw from the
front of the shifter, and then remove
the knob and shifter surround panel.
(Figure F)
Continue onto next page
REV. 1/30/23 INST99-3028S 3
(Figure G) (Figure H) (Figure I)
DASH DISASSEMBLY (CONT.)
7. Remove (4) Phillips screws now
exposed, and then lift up on the rear
of the center console. Slide toward
the back of the vehicle then unclip
and remove the entire center console.
(Figure G)
8. Remove (2) 9/32” screws securing the
climate control/radio trim panel and
remove. (Figure H)
9. Remove (4) 9/32” screws securing the
radio chassis, and then remove.
(Figure I)
Continue to Kit Preparation

Especificaciones del producto

Marca: AXESS
Categoría: No categorizado
Modelo: 99-3028S

¿Necesitas ayuda?

Si necesitas ayuda con AXESS 99-3028S haz una pregunta a continuación y otros usuarios te responderán




No categorizado AXESS Manuales

No categorizado Manuales

Últimos No categorizado Manuales