AXESS 99-5835G Manual de Usario

AXESS No categorizado 99-5835G

Lee a continuación 📖 el manual en español para AXESS 99-5835G (8 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
Attention: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that
all installation connections are secure before
cycling the ignition to test this product.
The World’s best kits.® metraonline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/27/21 INST99-5835G
I N S TA L L AT I O N I N S T R U C T I O N S
99-5835G
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Radio trim panel is painted gray
KIT COMPONENTS
• A) Radio trim panel • B) Dash panel • C) Radio brackets • D) Pocket • E) Airbag light • F) (4) #8 x 3/8" Phillips truss head screws
• G) (2) #8 x 3/8" Phillips pan head screws • H) (3) Metal “U” panel clips • I) (5) Metal “D” panel clips • J) (4) Small metal “D” panel clips • K) (4) Plastic panel clips
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • T-20 Torx driver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
Final Assembly .......................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-5524
Antenna Adapter: 40-EU10
A B C F
G
D E
Ford Transit 2015-2019*
H I J K
*For non-navigation model
Visit for more detailed information about the product and up-to-date vehicle
MetraOnline.com
specific applications
Visit for audio/video and steering wheel MetraOnline.com
control interface options.
1-386-257-1187
|
MetraOnline.com
DASH DISASSEMBLY KIT PREPARATION
2
1. Unclip the dash panel above the radio.
(Figure A)
2. Remove (2) T-20 Torx screws securing the
factory radio/trim panel. (Figure B)
3. Unclip the factory radio/trim panel from
the dash, unplug and remove. (Figure B)
4. Remove (1) T-20 Torx screw per vent then
unclip and remove the vents from the
factory radio/trim panel. (Figure C)
5. Unclip and remove the hazard switch
assembly from the factory radio/trim
panel. (Figure D)
Continue to Kit Preparation
1. Secure the factory vents to the radio
trim panel using the (2) #8 x 3/8"
Phillips pan head screws provided.
(Figure A)
2. Snap the factory hazard button into the
radio trim panel. An airbag light blank
has been included for models without a
passenger airbag indicator. (Figure A)
(Figure B)
(Figure A) (Figure D)
(Figure B) (Figure C)
(Figure C)
(Figure A)
3. Attach the (4) plastic panel clips
provided to the radio trim panel.
(Figure B)
4. Attach the (12) metal panel clips
provided to the dash panel. (Figure C)
Continue to Kit Assembly
REV. 7/27/21 INST99-5835G
KIT ASSEMBLY FINAL ASSEMBLY
3
ISO DIN radio provision with pocket
1. Attach the pocket to the radio brackets
using the (4) supplied #8 x 3/8" Phillips
truss head screws. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the completed
assembly and then secure it using the
screws supplied with the radio.
(Figure B)
Continue to Final Assembly
ISO DDIN radio provision
1. Attach the radio brackets to the radio
using screws supplied with the radio.
(Figure C)
Continue to Final Assembly
(Figure A)
1. Cut the shaded portion from the
sub-dash of the vehicle to allow the
radio to fit. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for
proper operation.
3. Secure the radio into the dash.
4. Snap the radio trim panel over the radio
and then reassemble the dash in reverse
order of disassembly.
Remove shaded area
(Figure A)
(Figure B)
(Figure C)

Especificaciones del producto

Marca: AXESS
Categoría: No categorizado
Modelo: 99-5835G

¿Necesitas ayuda?

Si necesitas ayuda con AXESS 99-5835G haz una pregunta a continuación y otros usuarios te responderán


No categorizado AXESS Manuales

AXESS

AXESS AXDSPX-BM1 Manual de Usario

25 Octubre 2024
AXESS

AXESS AXBUCS-MZ286V Manual de Usario

19 Septiembre 2024
AXESS

AXESS 99-7014HG Manual de Usario

19 Septiembre 2024
AXESS

AXESS AXGM-17 Manual de Usario

19 Septiembre 2024
AXESS

AXESS AXGMLN-34 Manual de Usario

19 Septiembre 2024
AXESS

AXESS 99-7382HG Manual de Usario

19 Septiembre 2024
AXESS

AXESS GMOS-12 Manual de Usario

19 Septiembre 2024
AXESS

AXESS XSVI-1788-NAV Manual de Usario

19 Septiembre 2024
AXESS

AXESS 99-7510HG Manual de Usario

19 Septiembre 2024
AXESS

AXESS AXBUCS-NI246V Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024