AXESS 99-5841B Manual de Usario

Lee a continuación 📖 el manual en español para AXESS 99-5841B (32 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/32
The World’s best kits.® metraonline.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/13/22 INST99-5841B
I N S TA L L AT I O N I N S T R U C T I O N S
99-5841B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
ISO DIN radio provision with pocket
• ISO DDIN radio provision
Integrated controls for info center
Painted black
KIT COMPONENTS
• A) Radio trim panel with touchscreen display • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (4) Panel clips
• F) HVAC interface and wiring harness (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 7mm socket wrench • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DIN radio provision with pocket ..................4
–ISO DDIN radio provision .....................................4
Axxess Interface Installation ............................5-14
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface and
harness included
Antenna Adapter: 40-EU10
(sold separately)
A B C D E
Ford Fusion 2013-2020
Visit for more detailed information about the product and up-to-date MetraOnline.com
vehicle specific applications.
Note: Hybrid vehicles not supported
Patent # 10,579,232
386.257.1187
|
MetraOnline.com
For 2013-2016 models only:
1. Unclip the trim from around the shifter.
(Figure A)
2. Unclip the U-shaped trim from the rear
of the shifter. (Figure B) 14-16 only
For 2017-2019 models only:
3. Remove the left and right side panels on
the center console, and then remove the
(2) 7mm screws exposed. (Figure C)
All models:
4. Unclip the trim surrounding the center
dash. (Figure D)
Ensure that the vehicle is completely off
before proceeding onto the following
(3) steps
5. Remove the (2) 9/32” screws securing
the radio/climate control panel, and
then unclip, unplug, and remove.
6. Remove the (4) 9/32” screws securing
the display screen, and then unplug
and remove.
7. Remove the (2) 9/32” screws securing
the radio chassis, and then unplug
and remove.
Continue to Kit Preparation
DASH DISASSEMBLY
2
(Figure B)
(Figure A) (Figure C)
(Figure D)
REV. 12/13/22 INST99-5841B
KIT PREPARATION
3
(Figure A) (Figure B)
1. Cut and remove the shaded area from
the sub-dash to allow clearance for the
aftermarket radio. (Figure A)
2. Attach the
(4) panel clips
provided to
the
radio trim panel
. (Figure B)
Continue to Kit Assembly
Remove shaded area

Especificaciones del producto

Marca: AXESS
Categoría: No categorizado
Modelo: 99-5841B

¿Necesitas ayuda?

Si necesitas ayuda con AXESS 99-5841B haz una pregunta a continuación y otros usuarios te responderán




No categorizado AXESS Manuales

No categorizado Manuales

Últimos No categorizado Manuales