AXESS AXDSPL-FD2 Manual de Usario

AXESS No categorizado AXDSPL-FD2

Lee a continuación 📖 el manual en español para AXESS AXDSPL-FD2 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
AXDSPL-FD2
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 8/6/24 INSTAXDSPL-FD2
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Installation & Installation Options 2 ........................
Connections 3-4 ........................................................
Mobile App: Quick Setup 5-6 ...................................
Specifications 7 .........................................................
Ford DSP Interface with Pre-Wired Harness
2014-Up
Includes a DSP (Digital Signal Processor)
Selectable 15 Band graphic EQ or 5 Band Parametric EQ
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear, and sub
Selectable low pass, band pass, and high pass filters
Selectable crossover slopes; 12db, 24db, 36db, 48db
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Retains SYNC® voice prompts
Adjustable chime level
Can be used in amplified and non-amplified models
(Features continued on next page)
• AXDSPL-FD2 interface
• AXDSPL-FD2 interface harness
• AXDSPL-FD2 vehicle T-harness
• AXDSPX-FD2 display T-harness
• Bass knob
APPLICATIONS
MetraOnline.com may be used to assist
with dash assembly instructions. Simply
enter your Year, Make, Model vehicle
into the vehicle fit guide and look for the
Dash Kit Installation Instructions.
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this
product. Ensure that all installation connections,
especially the air bag indicator lights, are plugged in
before reconnecting the battery or cycling the ignition
to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
Google Play Store Apple App Store
iOS 12.1 or higher
Visit for current application list
Axxessinterfaces.com
www.MetraOnline.com
2
Adding a sub
woofer
to a factory system:
This feature offers the ability to add a subwoofer to a factory system, whether amplified or non-
amplified. (Refer to )Page 3
Adding a full-range amp & sub
woofer
to a factory system:
This feature offers the ability to add a
full-range amp and sub to a factory system, whether
amplified* or non-amplified. (Refer to )Page 4
* For amplified models the amp must be bypassed/unplugged, and chosen in With OE Amplifier
the tab under .Configuration Vehicle Type
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio*, then unplug all connectors.
2. AXDSPL-FD2 vehicle T-harness Install the to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. For NAV models only: AX-DSPX-FD2 display T-harness Install the to the vehicle and
make all necessary connections.
4. AXDSPL-FD2 vehicle T-harness AXDSPL-FD2 interface Plug the to the .
5. AXDSPL-FD2 interface harness AXDSPL-FD2 interface Plug the to the .
6.
Download and install the from the or AXDSP-X app Google Play Store Apple App Store
.
7.
Cycle the ignition on.
8. Bluetooth Open the app then select the ® Connection tab. Follow the instructions to
pair the mobile device to the interface. Refer to
Page 5
for more information.
9. Configuration Lock Down Scroll to the tab then select the vehicle type. Press the **
button to save the configuration. Refer to
Page 6
for more information.
10. Connect the amp turn-on wire.
11. Lock Down Adjust the settings in the app as desired. Press the ** button to save any
new configurations.
* Refer to for dash disassembly. If Metra makes a dash kit for the
Metraonline.com
vehicle, disassembly will be within those instructions.
** Anytime the interface is locked down the key must be cycled off then back on.
INSTALLATION OPTIONS INSTALLATION
Easy behind the radio installation with pre-wired harness
Internal header port for adding interface modules
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet or mobile phone), compatible with
both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Micro-B USB updatable
FEATURES CO NT.
3
REV. 8/6/24 INSTAXDSPL-FD2
ADDING A SUBWOOFER TO A FACTORY SYSTEM
Factory Display Screen
Factory Display Harness
Interface Harness
Factory Radio Harness
Interface
Black - Ground
Orange - Control
Bass Knob
Any remaining wires
tape off and disregard
Vehicle T-Harness
K deep Connecte
Any remaining wires
tape off and disregard Blue/White - Amp Turn-On Wire
Display T-Harness
* NAV models only *
Connect (2) Wires
* NAV models only *
Factory Radio Chassis
RCA Jacks
(sold separately)
6
5
4
3
2
1
These outputs can be used for
additional sub amps, or for adding
onto the em at a later datesyst

Especificaciones del producto

Marca: AXESS
Categoría: No categorizado
Modelo: AXDSPL-FD2

¿Necesitas ayuda?

Si necesitas ayuda con AXESS AXDSPL-FD2 haz una pregunta a continuación y otros usuarios te responderán




No categorizado AXESS Manuales

No categorizado Manuales

Últimos No categorizado Manuales