AXESS AXDSPL-FD3 Manual de Usario

AXESS No categorizado AXDSPL-FD3

Lee a continuación 📖 el manual en español para AXESS AXDSPL-FD3 (12 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
AXDSPL-FD3
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 2/20/24 INSTAXDSPL-FD3
Google Play Store Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip-ties • Multimeter
TABLE OF CONTENTS
Installation & Installation Options 2 ........................
Connections 3-4 ........................................................
AXDSPL-BT Installation...........................................5
AXDSPL-SP Installation...........................................6
Mobile App 7-8 .........................................................
Specifications 9 .........................................................
Ford DSPL Interface(for Non-Amplified Vehicles
with Pre-Wired Harness)
2020-Up
Includes a DSP (Digital Signal Processor)
Selectable 15 Band graphic EQ or 5 Band Parametric EQ
4 inputs and 6 individually assignable outputs
Independent equalization for front, rear, and sub
Selectable low pass, band pass, and high pass filters
Selectable crossover slopes; 12db, 24db, 36db, 48db
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Designed for non-amplified models
Easy behind the radio installation with pre-wired harness
Internal header port for adding interface modules
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
USB Micro-B updatable
• AXDSPL-FD3 interface
• AXDSPL-FD3 interface harness
• AXDSPL-FD3 vehicle T-harness
• Bass knob
APPLICATIONS
Visit axxessinterfaces.com for current application list
www.MetraOnline.com
MetraOnline.com may be used to assist
with dash assembly instructions. Simply
enter your Year, Make, Model vehicle
into the vehicle fit guide and look for
the Dash Kit Installation Instructions.
2
Adding a subwoofer to a factory system:
The diagram on shows the connections that need to be made to add a subwoofer to the Page 3
factory system. RCA jacks sold separately.Note:
Adding a full-range of amps & subwoofer to a factory system:
The diagram on shows the connections that need to be made to add: Subwoofer (RCA jacks Page 4
sold separately).
Amplifier (SPDT relay required) or Additional Amp (RCA jacks sold separately).E-123
16-pin header port:
Inside the interface is a 16-pin header port for adding optional modules (sold separately). Pages 5
and 6 will show the installation and use of these modules.
- Bluetooth streaming interfaceAXDSPL-BT
- Toslink digital outputAXDSPL-SP
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio. †
2. AXDSPL-FD3 vehicle T-harness Install the to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXDSPL-FD3 vehicle T-harness AXDSPL-FD3 interface Plug the to the .
4. AXDSPL-FD3 interface harness AXDSPL-FD3 interface Plug the to the .
5.
Download and install the from the or AX-DSP-XL app Google Play Store Apple App
Store
.
6.
Cycle the ignition on.
7. Bluetooth Connection Open the app then select the tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 7 for more information.
8. Configuration Lock Down Scroll to the tab then select the vehicle type. Press the
button to save the configuration. Refer to page 8 for more information.
9. Connect the amp turn-on wire.
10. Adjust the settings in the app as desired. Press the button to save any Lock Down
new configurations.
For dash disassembly instructions, refer to . Enter the year, make, metraonline.com
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
Anytime the interface is locked down the key must be cycled off then back on.
INSTALLATION OPTIONS INSTALLATION
3
REV. 2/20/24 INSTAXDSPL-FD3
Factory Radio
These outputs can be used for
additional sub amps, or for adding
onto the system at a later date
6
5
4
3
2
1
RCA Jacks
(sold separately)
Keep Connected
Any remaining wires
tape off and disregard
Black - Ground
Orange - Control
Bass Knob
Factory Radio Harness
Interface
Any remaining wires
tape off and disregard
Blue/White - Amp Turn-On Wire
Interface Harness
Factory Display Screen
Factory Display Harness
Display T-Harness
* NAV models only *
Connect (2) Wires
* NAV models only *
ADDING A SUB TO A FACTORY SYSTEM
LD-DSP-FD3

Especificaciones del producto

Marca: AXESS
Categoría: No categorizado
Modelo: AXDSPL-FD3

¿Necesitas ayuda?

Si necesitas ayuda con AXESS AXDSPL-FD3 haz una pregunta a continuación y otros usuarios te responderán




No categorizado AXESS Manuales

No categorizado Manuales

Últimos No categorizado Manuales