AXESS AXLOC-BM1 Manual de Usario

Lee a continuación 📖 el manual en español para AXESS AXLOC-BM1 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
AXLOC-BM1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/15/22 INSTAXLOC-BM1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the
ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip-ties
TABLE OF CONTENTS
Applications.............................................................1
Installation ............................................................. 2
Diagram .................................................................. 3
APPLICATIONS
BMW
3-Series 2002-2006
5-Series 2001-2003
M3 2002-2006
X3 2004-2010
X5 2001-2006
Z4 2003-2008
Mini
Clubman 2008-2014
Convertible 2009-2015
Coupe 2012-2015
Hatchback 2007-2013
Roadster 2012-2015
Volkswagon
Beetle 2012-2015
CC 2009-2017
EOS 2007-2016
Golf 2002-2014
GTI 2006-2014
Jetta 2002-2015
Jetta Sportwagon 2010-2014
Passat 2002-2015
R32 2007-2008
Tiguan 2009-2015
Toureg 2004-2010
KIT COMPONENTS
• AXLOC-BM1 Wiring Harness
• Gain Controller
• 12v-500mA Remote Wire
• Auxiliary Cable
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications.
• Designed to provide (2) channels of low-level audio output from the factory system.
• Allows for the installation of an amplifier for speakers or subwoofers.
• Gain Controller included to adjust the overall output.
• 12v-500mA remote wire activated with signal sense.
• 55-watts per channel.
• Designed for non-amplified vehicles.
Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.
BMW/MINI/VW LOC (Line Output Converter)
AXLOC-BM1 (for Non-Amplified Vehicles) 2001-2017
For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the for .Vehicle Fit Guide Radio Install Kits
2
INSTALLATION
1.
Disconnect the harness from the factory
tuner and install the AXLOC-BM1 harness
provided with this kit.
2. Mount the gain controller in a suitable
location, and connect the auxiliary cable
to the , then to the Gain BASS KNOB
Connector of the AXLOC harness.
3.
Install the aftermarket amplifier and
run an RCA pair (sold separately) to
the line converter.
4. Connect the remote wire, plug in the
device and secure all connections prior
to testing.
NOTE: If the vehicle is equipped with active
noise cancellation microphones (ANC), it is
recommended that they are disabled to prevent
potential noise when installing subwoofers.
3
REV. 12/15/22 INSTAXLOC-BM1
DIAGRAM
LD-AXLOC-BM1
TO RADIO TO VEHICLE
Remote
Gain Cont.
Line Out Convertor Bass Knob (Top View)
Aux. Cable
Bass Knob (Front View)
Line Out Convertor
(Front View)
Output Level Adjustment
NOTE: If using external Bass knob,
make sure your “Output Level
Adjustment” knob is turned all
the way down (turned all the way
to the left).

Especificaciones del producto

Marca: AXESS
Categoría: No categorizado
Modelo: AXLOC-BM1

¿Necesitas ayuda?

Si necesitas ayuda con AXESS AXLOC-BM1 haz una pregunta a continuación y otros usuarios te responderán




No categorizado AXESS Manuales

No categorizado Manuales

Últimos No categorizado Manuales