AXESS AXPIO-JT1 Manual de Usario

AXESS No categorizado AXPIO-JT1

Lee a continuación 📖 el manual en español para AXESS AXPIO-JT1 (16 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

AXPIO-JT1

I N S T A L L A T I O N I N S T R U C T I O N S

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Panel removal tool • Phillips screwdriver

• Torx screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly

- Radio provision ...................................................2

- Pioneer Modular DDIN radio provision ..............3

AXXESS Interface Installation ...........................4-16

Jeep

Gladiator JT 2020-Up

Note: This kit will function in both Single-Zone and Dual-Zone vehicles:

• All HVAC functions will be retained.

•

Single-Zone vehicles will only get status feedback of the HVAC functions,

while Dual-Zone vehicles can also be controlled through the radio screen.

• Compass is only retained on vehicles equipped with the UConnect 3

(5" touchscreen).

• The External Speaker is only required in vehicles with safety group features.

Attention! Designed speciﬁcally for Pioneer’s DMH-W4600NEX/WC4660NEX.

Pioneer 9" DMH-WC6600NEX will require the Metra Floating Mount Kit

109-UN02. (sold separately)

KIT COMPONENTS

• A) Radio bezel • B) Shallow mount brackets • C) Modular radio brackets • D) Panel clips (4)

A B C D

WIRING & ANTENNA CONNECTIONS

Wiring Harness: Included with Kit

Antenna Adapter:

Included with Kit

GPS

Antenna Adapter:

Included with Kit

Visit AxxessInterfaces.com for up-to-date

vehicle speciﬁc applications.

Product Info

DASH DISASSEMBLY KIT ASSEMBLY

1. Unsnap and remove the panel below the

steering column. (Figure A)

2. Using the panel removal tool, carefully

unclip the climate control panel, unplug

the HVAC and start/stop button, and

then set aside. (Figure B)

3. Remove (2) Phillips screws securing the

radio trim panel, then, starting at the

bottom, unclip and remove the panel.

(Figure C)

4. Remove (4) Phillips screws securing the

factory radio, disconnect the wiring, and

then remove the radio.

(Figure A)

(Figure B)

(Figure C)

(Figure A)

(Figure B)

Radio provision

1. Secure the

shallow radio brackets

the radio using screws supplied with the

radio. (Figure A)

2. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using the

proper mating adapter from Metra and/

or Axxess.

3. Reconnect the negative battery terminal

and test the Pioneer radio for proper

operation.

4. Place the radio into the dash, then

secure using the factory screws.

5. Attach (4)

panel clips

provided with this

kit onto the

radio bezel

, and then snap

the bezel over the radio. (Figure B)

6. Reassemble the dash in the reverse

order of disassembly to complete

the installation.

REV. 7/5/22 INSTAXPIO-JT1

KIT ASSEMBLY

(Figure C)

(Figure A)

(Figure B)

Pioneer Modular DDIN radio provision

1. Secure the radio display to the

modular

radio brackets

using (6) screws supplied

with the radio. (Figure A)

Note: Reference the aftermarket radio’s

installation manual to determine which

screws secure the radio display.

2. Secure the radio chassis to the radio

display/bracket assembly using (4)

screws supplied with the radio. (Figure B)

Note: Reference the aftermarket radio’s

installation manual to determine which

screws secure the radio chassis.

3. Route the RGB extension cable from the

radio chassis to the display screen, then

connect the cable to the display screen.

4. Locate the factory wiring harness and

antenna connector in the dash and

complete all necessary connections to

the radio. Metra recommends using the

proper mating adapter from Metra and/

or Axxess.

Reconnect the negative battery

terminal and test the Pioneer radio

for proper operation.

6. Place the radio display into the dash,

and then secure using the factory screws.

7. Attach (4)

panel clips

provided with this

kit onto the

radio bezel

, then snap the

bezel over the radio. (Figure C)

8. Reassemble the dash in the reverse

order of disassembly to complete

the installation.

Especificaciones del producto

Marca:	AXESS
Categoría:	No categorizado
Modelo:	AXPIO-JT1

¿Necesitas ayuda?

Si necesitas ayuda con AXESS AXPIO-JT1 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

No categorizado AXESS Manuales

AXESS AXDSPX-BM1 Manual de Usario

25 Octubre 2024

AXESS AXBUCS-MZ286V Manual de Usario

19 Septiembre 2024

AXESS 99-7014HG Manual de Usario

19 Septiembre 2024

AXESS AXGM-17 Manual de Usario

19 Septiembre 2024

AXESS AXGMLN-34 Manual de Usario

19 Septiembre 2024

AXESS 99-7382HG Manual de Usario

19 Septiembre 2024

AXESS GMOS-12 Manual de Usario

19 Septiembre 2024

AXESS XSVI-1788-NAV Manual de Usario

19 Septiembre 2024

AXESS 99-7510HG Manual de Usario

19 Septiembre 2024

AXESS AXBUCS-NI246V Manual de Usario

19 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024

Philips 43PUL7672 Manual de Usario

27 Octubre 2024

Manhattan 461504 Manual de Usario

27 Octubre 2024

Sungrow SG125HV Manual de Usario

27 Octubre 2024

Schneider CCT724319 Manual de Usario

27 Octubre 2024

Technoline WS 250 Manual de Usario

27 Octubre 2024

Livarno IAN 354423 Manual de Usario

27 Octubre 2024

Kupper 12152 Manual de Usario

27 Octubre 2024

JennAir CARBON24L Manual de Usario

27 Octubre 2024