Bauknecht AM 8F4 Manual de Usario

Lee a continuación 📖 el manual en español para Bauknecht AM 8F4 (4 páginas) en la categoría lavadora. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
EN
Quick Guide
THANK YOU FOR PURCHASING A BAUKNECHT PRODUCT.
To receive more comprehensive assistance, register the
appliance on
www.bauknecht.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set cycle 3 at a temperature of 40°C.
3) Long synthetics cycle: set cycle 5 at a temperature of 40°C.
* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.
** The duration of the wash cycles can be checked on the display.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
DETERGENT DISPENSER DRAWER
Compartment 1: Prewash detergent (powder)
Compartment 2: Washing detergent (powder
or liquid)
If liquid detergent is used, the removable plastic
partition (supplied) should be used for proper A
dosage.
If powder detergent is used, place the partition
into slot .B
Compartment 3: Additives (fabric softeners,
etc.)
The fabric softener must not exceed the MAX” level.
1
2
3
A
B
1. ON/OFF button
2. CHILD LOCK button
3. CLEANING ACTION button
4. CLEANING ACTION indicator lights
5. START/PAUSE button and indicator light
6. OPTION button and indicator light
7. DELAY START button
8. SPIN button
9. TEMPERATURE button
10. WASH CYCLE SELECTOR KNOB
Maximum load 8 kg
Power input in o mode 0.5 W / in left-on mode 8 W Detergents and Additives Recommended
detergent
Residual
dampness %
Energy con-
sumption kWh
Total water l
Wash cycle Temperature Max.
spin speed
(rpm)
Max.
load
(kg)
Duration
(minutes)
Prewash Wash Fabric
softener Powder Liquid
Default Range 1 2 3
1 Anti Stain 40°C - 40°C 1400 5 **  – –
2 Whites 60°C - 90°C 1400 5 **    – –
3 Cotton (2) 40°C - 60°C 1400 8 230’   53 1.03 92
4
60°/4
Eco Cotton (1) 60°C 60°C 1400 8 225’   53 1.04 55
40°C 1400 8 230’   53 1.03 92
5 Synthetics (3) 40°C - 60°C 1000 4.5 **  – –
6 Anti Allergy Plus 60°C - 60°C 1400 5 **   – –
7 Baby 40°C - 40°C 1000 5 **  – –
8 Bed & Bath 60°C - 60°C 1400 8 **    – –
9 Fast Wash 60’ 60°C - 60°C 1400 3.5 **   – –
10 Fast Wash 30’ 30°C - 30°C 800 3.5 30’   71 0.20 38
11 Cotton 20°C 20°C - 20°C 1400 8 **   – –
12 Shirts 40°C - 40°C 600 2 **   – –
13 Wool 40°C - 40°C 800 2 **   – –
14 Delicates 30°C - 30°C 0 1 **   – –
Rinse 1400 8 ** – –
Spin & Pump Out * 1400 8 ** – –
Required dosage Optional dosage
1
10
2
DISPLAY
4
567
89
3
WASH CYCLES
Follow the instructions on the symbols of the garments wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Anti Stain
The programme is suitable to heavily-soiled garments with resistant
colours. It ensures a washing class that is higher than the standard class (A
class). When running the programme, do not mix garments of dierent
colours. We recommend the use of powder detergent. Pre-treatment with
special additives is recommended if there are obstinate stains.
Whites
heavily soiled whites and resistant colours.
Cotton
lightly soiled resistant and delicate colours.
Eco Cotton
Suitable for washing moderately soiled cotton garments. At 40°C and
60°C it is the standard cycle for washing cotton garments, and is the most
ecient in terms of combined water and electricity consumption.
Synthetics
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Anti Allergy Plus
Suitable for removing major allergens such as pollen, mites and cat or
dog hair.
Baby
use the special wash cycle to remove the soiling typically caused by
babies, while removing all traces of detergent from nappies in order to
prevent the delicate skin of babies from suering allergic reactions. The
cycle has been designed to reduce the amount of bacteria by using a
greater quantity of water and optimising the eect of special disinfecting
additives added to the detergent.
Bed & Bath
use programme to wash bed linen and towels in one single cycle: it
optimises softener performance and helps you save time and energy. We
recommend the use of powder detergent.
Fast Wash 60’
For washing normal soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Fast Wash 30’
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Cotton 20°C
the programme ideal for lightly soiled cotton loads. The eective
performance levels achieved at cold temperatures, which are comparable
to washing at 40°, are guaranteed by a mechanical action which operates
at varying speed, with repeated and frequent peaks.
Shirts
use the special wash cycle to wash shirts in dierent fabrics and colours to
guarantee they receive the best possible care.
Wool - Woolmark Apparel Care - Green:
The Wool wash cycle of this machine has been approved
by The Woolmark Company for the washing of wool
garments labelled as “hand wash provided that the
products are washed according to the instructions on the
garment label and those issued by the manufacturer of
this washing machine (M1127). The Woolmark logo is a
Certication mark in many countries.
Delicates
use programme to wash very delicate garments having strasses or sequins. To
wash silk garments and curtains select the cycle 14 and set the Sanft level
from option . We recommend turning the garments inside out before
washing and placing small items into the special bag for washing delicates.
Use liquid detergent on delicate garments for best results.
Rinse
Designed for rinsing and spinning.
Spin & Drain
Designed for spinning and draining the water.
DISPLAY
The display is useful when programming the washing machine and
provides plenty of information.
The duration of the available wash cycles and the remaining time of a
running cycle appear (the display will show the maximum duration of the
cycle chosen, which may decrease after several minutes, since the
eective duration of the programme varies depending on the wash load
and the settings chosen); if the DELAY START option has been set, the
countdown to the start of the selected wash cycle will appear.
Pressing the corresponding button allows you to view the maximum spin
speed and temperature values attained by the machine during the set
wash cycle, or the values selected most recently, if these are compatible
with the set wash cycle.
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is o, the door can be opened (wait
approximately 3 minutes).
FIRSTTIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the
Auto-Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
TIPS AND SUGGESTIONS section.
- Press the ON/OFF button ; the indicator light relative to START/PAUSE
will ash slowly.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the “DETERGENT DISPENSER
DRAWER” section.
- Close the door.
- The machine automatically displays the maximum temperature and spin
speed values for the selected cycle, or the most recently used settings if
they are compatible with the selected cycle. Pressing the button
gradually reduces the temperature down to the cold wash OFF” setting.
Pressing the button gradually reduces the spin speed until it is
completely excluded (“OFF” setting). Pressing the buttons further restores
the maximum allowed values for the selected cycle.
- Select the desired wash cycle.
- Select the desired option.
- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady and the door will lock ( symbol on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash. To start the wash cycle from the point at which it
was interrupted, press the START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash. If the symbol is not lit, the door may be
opened (wait approximately 3 minutes). Press the START/PAUSE
button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash),
then select the desired cycle and press the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “END” on the display; when the
symbol switches o, the door may be opened (wait approximately 3
minutes). Open the door, unload the laundry and switch o the machine.
If you do not press ON/OFF button, the washing machine will switch
o automatically after about a half of an hour.
OPTIONS
- If the selected option is not compatible with the set wash cycle, the
indicator light will ash and the option will not be activated.
Prewash
Allows you to perform a prewash.
Delay start
To set a delayed start for the selected cycle, press the corresponding
button repeatedly until the desired delay period is reached. When this
option has been activated, the symbol lights up on the display. To
remove the delayed start setting, press the button until OFF” appears on
the display.
Temperature
Each wash cycle has a pre-dened temperature. To modify the
temperature, press the button. The value will appear on the display.
Spin
Each wash cycle has a pre-dened spin speed. To modify the spin speed,
press the button. The value will appear on the display.
Cleaning Action
Option makes it possible to optimise washing based on the level of
soil in the fabrics and on desired wash cycle intensity.
Select the wash programme: the cycle will be automatically set to
as optimised for garments with an average level of soil (this Normal
setting is not applicable to the “Wool” cycle, which is automatically set to
“ ”).Sanft
For heavily-soiled garments press button until the level Intensiv
is reached. This level ensures a high-performance wash due to a larger
quantity of water used in the initial phase of the cycle and due to
increased drum rotation. It is useful when removing the most stubborn
stains.
For lightly-soiled garments or a more delicate treatment of the fabrics,
press button until the level is reached. The cycle will reduce Sanft
drum rotation to ensure washing results that are perfect for delicate
garments.
CHILD LOCK
To activate the control panel lock, press and hold the button for
approximately 2 seconds. When the indicator light is lit, the control panel
is locked (except for the ON/OFF button). This will prevent accidental
modications to wash cycles, especially when children are at home. To
deactivate the control panel lock, press and hold the button for
approximately 2 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed bres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash
new coloured garments separately). Delicates (small garments – such as
nylon stockings – and items with hooks – such as bras: insert them in a
fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and
the drum. Check all buttons.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washing machine
o and disconnect it from the mains power. Do not use ammable liquids to
clean the washing machine.
Cutting o the water and electricity supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all
maintenance work.
Cleaning the washing machine
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
abrasives.
The washing machine has a Auto-Clean” cycle for its internal parts; it
must be run without any load in the drum.
To optimise this cycle, it is possible to use either detergent (10% of the
quantity specied for lightly soiled garments) or special additives to clean
the washing machine. We recommend running a cleaning cycle every 40
wash cycles.
To start the programme press button for 5 seconds.
The cycle will start automatically and will run for about 70 minutes. To
stop the cycle, press the START/PAUSE button.
Cleaning the detergent dispenser drawer
Remove the dispenser drawer by lifting and pulling it outwards. Wash it
under running water; this procedure should be eected regularly.
Caring for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant
odours from forming.
Cleaning the pump
The washing machine is tted with a self-cleaning pump that does not require
any maintenance. Small items (such as coins or buttons) may sometimes fall
into the protective pre-chamber situated at the base of the pump.
! Make sure that the wash cycle has ended and unplug the appliance.
To access the pre-chamber:
1. remove the covering panel on the front side of the machine by inserting
a screwdriver in the centre and sides of the panel and using it as a lever;
2. loosen the drainage pump cover by turning it anti-clockwise: it is
normal for some water to leak out;
3. clean the inside thoroughly;
4. screw the cover back on;
5. put the panel back in place, making sure the hooks slot in place before
pushing the panel onto the appliance.
Checking the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every
spin and to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the washing
rotation speed. If, after several attempts, the load is not balanced
correctly, the machine spins at a reduced spin speed. If the load is
excessively unbalanced, the washing machine performs the distribution
process instead of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are mixed in the load.
ACCESSORIES
Contact our Technical Assistance Service to check whether the following
accessories are available for this washing machine model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of
your washing machine to save space and facilitate loading and unloading
of the tumble dryer.
TRANSPORT AND HANDLING
Do not lift the washing machine by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
“Installation instructions”.

Especificaciones del producto

Marca: Bauknecht
Categoría: lavadora
Modelo: AM 8F4
Color del producto: Black, Red
Peso.: 4600 g
Ancho: 272 mm
Profundidad: 398 mm
Altura: 233 mm
Longitud del cable: 6 m
Nivel de ruido: 82 dB
Consumo-anual-de-energía: 52 kWu
Peso del embalaje: 7700 g
Ancho del embalaje: 316 mm
Empaquetadura en profundidad: 502 mm
Altura del embalaje: 310 mm
Amable: Cilinderstofzuiger
Filtración de aire de aspiradora: HEPA
Rango: 9 m
Método de separación de la suciedad: Filtrerend
tipo de limpieza: Droog
Capacidad de polvo: 2 l
Potencia máxima de entrada: 1500 W
Tipo de contenedor de aspiradora: Zakloos
poder de succión: 340 AW
tipo de tubo: Telescopisch
potencia variable: Ja
Uso correcto: Thuis
Limpia superficies: Carpet, Hard floor
herramienta para rincones: Ja

¿Necesitas ayuda?

Si necesitas ayuda con Bauknecht AM 8F4 haz una pregunta a continuación y otros usuarios te responderán




lavadora Bauknecht Manuales

lavadora Manuales

Últimos lavadora Manuales