BDI Mirage 8224 Manual de Usario

BDI No categorizado Mirage 8224

Lee a continuación 📖 el manual en español para BDI Mirage 8224 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
1
Mirage is engineered for easy assembly. Carefully follow this procedure
to prevent any damage.
Placement and Maintenance
Mirage is designed for indoor use on level floors. Clean glass with glass
cleaner; steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. Note that some components
are shipped inside the cabinet. The assembly workspace should be a non-
marring surface such as carpet. For missing hardware pieces, please
contact BDI Customer Service at customerservice@bdiusa.com. For all
other concerns, please contact your BDI Retailer.
Step 2
Remove Pre-Installed Adjustable Shelves (L)
Component List
Designed by Al Glass and Cristian Wicha.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2009, BDI
Made in China. 080709v1
MIRAGE
8224
A S S E M B L Y I N S T R U C T I O N S
BDIUSA COM BDIUSA COM. CUSTOMERSERVICE@ .
C - Dowel Pin x 8
F - Leg Assembly
x 2
L - Assembled Cabinet
x 1
E - Cam Fastener x 2
D - Cam Bolt x 2
G - Front Rail x 1
H - M6 x 70mm Bolt x 4
I - M6 x 73mm Bolt x 2
J - Barrel Nut x 6
Pre-installed on M6 x
70mm Bolt (H) and M6
x 73mm Bolt (I)
B - 4mm Hex Driver
x 1
A - Phillips Screwdriver
x 1
K - Center Leg x 1
N - Back Panel x 2
M - Adjustable Shelf
x 2
L
2ASSEMBLY INSTRUCTIONS
BDIUSA CUSTOMERSERVICE BDIUSA.COM @ .COM
Step 3
Build Base Assembly
Press Dowel Pins (C) into place at indicated locations near ends of
Front Rail (G) Cam Bolts (D), then install at indicated locations using
provided Phillips Screwdriver (A). Then join the Front
Rail (G) and Leg Assemblies (F) together,
aligning holes for Cam Bolts (D) and Dowel
Pins (C).
Once Dowel Pins (C) and Cam Bolts (D)
are fully inserted into the respective holes,
fasten together by inserting Cam Fastener
(E) and turning it approximately one-half
turn clockwise using
Phillips Screwdriver (A).
Step 4
Install Base Assembly and Center Leg
With Assembled Cabinet (L) resting safely on its back surface,
press Dowel Pins (C) into place at six (6) indicated locations of
cabinet bottom. Then install built Base
Assembly to Cabinet bottom using
M6 x 70mm Bolts (H) and Barrel
Nuts (J), and tighten with Phillips
Screwdriver (A). Next install Center
Leg (K) to Cabinet bottom using M6 x
73mm Bolts (I) and Barrel Nuts (J),
and tighten with Phillips Screwdriver
(A).
NOTE: As are Barrel Nuts (J)
preinstalled on ends of M6 x 70mm
Bolts (H) and M6 x 73mm Bolts
(I), first loosen and remove Barrel
Nuts from Bolts Bolts , then insert
through the Base Assembly and
Center Leg from bottom, fastening
into place with from Barrel Nuts
the top (inside cabinet).
E
C
D
F
G
H
H
H
H
I
I
C
CC
C
C
C
I
I
3ASSEMBLY INSTRUCTIONS
BDIUSA CUSTOMERSERVICE BDIUSA.COM @ .COM
Step 5
Re-install Shelves
Position the cabinet right side up and then re-install Adjustable
Shelves (M ).
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Arena Flat-Panel TV Mount #9972
(sold separately), with the following features:
accommodates most TVs up to 60”, 175 lbs
t
swivel allows rotating for optimal viewing t
allows adjustable TV mounting height t
accepts and routes cables to and from the TV t
For more information, visit www.bdiusa.com
Step 6
Install Back Panel
Install both to the backside of the cabinet by insert-Back Panels (N)
ing top edge in upper channel, then tipping bottom edge forward
and into lower channel.
NOTE: : Velcro straps are included as wire management for your
convenience.
1
2
or more information about the adjustable levelers
troubleshooting assembly, be sure to check out
tuning your new BDI Mirage Home Theater
ure” at the end of these instructions.
The adjustable leveler glides on the
bottom, mid section of the cabinet
are accessible from inside the
cabinet using the Hex Driver (B).
The shelf pins located inside the
left and right cabinet space may
be repositioned, allowing you to
raise or lower each shelf to the
desired level.
B
A
N

Especificaciones del producto

Marca: BDI
Categoría: No categorizado
Modelo: Mirage 8224

¿Necesitas ayuda?

Si necesitas ayuda con BDI Mirage 8224 haz una pregunta a continuación y otros usuarios te responderán




No categorizado BDI Manuales

No categorizado Manuales

Últimos No categorizado Manuales