BDI Sigma 6902 Manual de Usario

BDI Oficina Sigma 6902

Lee a continuación 📖 el manual en español para BDI Sigma 6902 (5 páginas) en la categoría Oficina. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in Turkey. 02.18.2019

T1 4mm Hex Wrench x1

Hardware:

C2 Frame x 1

C3 Leg x 1

C1 Glass Panel x 1

H1 M6 x 15mm Screw

x 11

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your

BDI products. Register today and you will be entered to win free a

BINK table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Sigma™ Office furniture is designed for indoor use on level floors.

Clean glass with glass cleaner, and other surfaces with a moist cloth.

Your Sigma™ Office furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, please contact BDI Customer Service at:

customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

SIGMATM 6902

RETURN

bdiusa.com

customerservice@bdiusa.com

SIGMA 6902

RETURN

Step 2 - Position the frame C2 upside down (end plate facing up). Position the top of the leg C3 over the

matching 4 threaded inserts on the cross bar. Attach the leg to the cross bar using screws H1 and hex

wrench T1.

H1 x 4

End plate up

cross bar

bdiusa.com

customerservice@bdiusa.com

SIGMA 6902

RETURN

Step 3 - Determine of you want the return on the left or right side of the desk. Find the 3 threaded insert below

the front edge (left or right). Thread a screw H1 middle insert in half way into the . With help from another

person, position the return so that the notch in the end plate goes around the middle screw. Tighten the middle

screw with the hex wrench.

1 screw H1 half way

into middle insert

(left hand side)

1 screw H1 half way

into middle insert

(right hand side)

Choose

left hand or

right hand

notch in end

plate

2 Person skTa

Especificaciones del producto

Marca:	BDI
Categoría:	Oficina
Modelo:	Sigma 6902
Peso.:	1590 g
Ancho:	- mm
Profundidad:	- mm
Altura:	- mm
Adecuado para:	Binnen
Material:	Aluminium
Productos compatibles:	Cisco 9115
Opciones de instalación:	Plafondgemonteerd