BeamZ MHL810 Manual de Usario
BeamZ
Effect machine
MHL810
Lee a continuación 📖 el manual en español para BeamZ MHL810 (48 páginas) en la categoría Effect machine. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/48
MHL810 Doublesweeper 8x10W
Ref. nr.: 150.300
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Beamz . Please read this manual thoroughly prior to using the in order to benefit product product
fully from all features.
Read the manual prior to using the . Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid product
fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the
manual for future reference.
- productPrior to using the , please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do NOT
open the housing.
- product. Do not place metal objects or pour liquids into the
This may cause electrical shock and malfunction.
- product Do not place the near heat sources such as
radiators, etc. Do not place the unit on a vibrating surface.
Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- product When unplugging the from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to
be replaced by a qualified technician.
- product If the is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the on. Contact your dealer. Do product
NOT connect the a rheostat or dimmer.product to
- To avoid fire and shock hazard, do not expose the product
to rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- product Connect the to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10 16A f- use.
- product During a thunderstorm or if the will not be used for a
longer period of time, unplug it from the mains. The rule is:
Unplug it from the mains when not in use.
- product If the has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the product
in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- product Secure the with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make sure
nobody stands in the mounting area. Mount the effect at
least 50cm away from inflammable material and leave at
least 1 meter space on every side to ensure sufficient
cooling.
- This poduct contains high intensity LEDs. Do not look into
the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave the
unit unattended.
- Do not use cleaning sprays to clean switches. The residues
of these sprays cause deposits of dust and grease. In case
of malfunction, always seek advice from a specialist.
- product Only operate the with clean hands.
- Do not force the controls.
- product If the has fallen, always have it checked by a
qualified technician before you switch the t on again.produc
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the with a dry cloth.product
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- product Switch the off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables prior to
moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use for
damages and faults!
- -The mains voltage is 220 240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains voltage
of the country is suitable for this product.
- Keep the original packing material so that you can transport
the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read
and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The product has been certified CE. It is prohibited to make any changes to the . They would invalidate the CE certificate and product
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41 and °F
35°C/ °F95 .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the be returned in the original product
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the is indicated on this type of power supply must be connected. Check that the mains product
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The must also product
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the to a protected circuit (circuit breaker or fuse). Make sure the has an appropriate device device
electrical ground to avoid the risk of electrocution or fire.
INSTALLATION
Attention:
• The installation of the product has to be built and constructed in a way that it can hold 10 times the weight for 1 hour
without any harming deformation.
• The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This
secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main
attachment fails.
• - Make sure the area below the installation place is free from unwanted persons during rigging, de rigging and servicing.
• - - The operator has to make sure that safety relating and machine technical installations are approved by an expert
before taking into operation for the first time and after changes before taking into operation another time.
• - -The operator has to make sure that safety relating and machine technical installations are approved by a skilled
person once a year.
• The fixture should be installed in the position where persons cannot reach and where persons may walk by or be
seated.
CAUTION: Please consider the respective national norms during the
installation! The installation must only be carried out by an
authorized employee or dealers!
CAUTION:
When installing the device, make sure there is no highly in
inflammable material (decoration articles, etc.) in between a
distance of min 20inch / .5 meter. 0
Especificaciones del producto
| Marca: | BeamZ |
| Categoría: | Effect machine |
| Modelo: | MHL810 |
¿Necesitas ayuda?
Si necesitas ayuda con BeamZ MHL810 haz una pregunta a continuación y otros usuarios te responderán
Effect machine BeamZ Manuales
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
25 Agosto 2024
21 Agosto 2024
19 Agosto 2024
16 Agosto 2024
14 Agosto 2024
13 Agosto 2024
Effect machine Manuales
- Effect machine Manta
- Effect machine American DJ
- Effect machine Adj
- Effect machine Behringer
- Effect machine NGS
- Effect machine Elation
- Effect machine Fredenstein
- Effect machine Chauvet
- Effect machine Showtec
- Effect machine Eurolite
- Effect machine Monoprice
- Effect machine Elysia
- Effect machine HQ Power
- Effect machine Antari
- Effect machine Stairville
- Effect machine Laserworld
- Effect machine Martin
- Effect machine ColorKey
- Effect machine Evo-Lite
- Effect machine Cameo
- Effect machine Sagitter
- Effect machine Lotronic
- Effect machine Lexicon
- Effect machine Futurelight
- Effect machine The Confetti Maker
Últimos Effect machine Manuales
18 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024