BEKO WMB 50621 Manual de Usario

BEKO lavadora WMB 50621

Lee a continuación 📖 el manual en español para BEKO WMB 50621 (67 páginas) en la categoría lavadora. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/67

WMB 50621

Washing Machine

User’s Manual

Lavatrice

Manuale utente

Veļas mazgājamā mašīna

Lietošanas rokasgrāmata

Pesumasin

Kasutusjuhend

2820522897_EN/110512.1738

2EN

1 Important safety instructions

This section contains safety instructions that will

help protect from risk of personal injury or property

damage. Failure to follow these instructions shall void

any warranty.

General safety

• 8yearsandolderchildrenandpeoplewith

reduced physical, sensory, and mental abilities

as well as unskilled or inexperienced persons

can use this appliance provided that they are

supervised and instructed on safe use of the

appliance as well as to the related dangers.

Children should not play or tamper with the

appliance. Cleaning and user maintenance

should never be performed by children unless

supervised by a responsible adult.

• Neverplacetheproductonacarpet-covered

floor; otherwise, lack of airflow beneath the

machine will cause electrical parts to overheat.

This will cause problems with your product.

• Donotoperatetheproductifthepowercable

/ plug is damaged. Call the Authorized Service

Agent.

• Haveaqualifiedelectricianconnecta

16-Amperefusetotheinstallationlocationofthe

product.

• Iftheproducthasafailure,itshouldnotbe

operated unless it is repaired by the Authorized

Service Agent. There is the risk of electric shock!

• Thisproductisdesignedtoresumeoperating

in the event of powering on after a power

interruption.Ifyouwishtocancelthe

programme, see "Cancelling the programme"

section.

• Connecttheproducttoagroundedoutlet

protected by a fuse complying with the values

inthe"Technicalspecifications"table.Donot

neglect to have the grounding installation made

byaqualifiedelectrician.Ourcompanyshall

not be liable for any damages that will arise

when the product is used without grounding in

accordance with the local regulations.

• Thewatersupplyanddraininghosesmustbe

securely fastened and remain undamaged.

Otherwise,thereistheriskofwaterleakage.

• Neveropentheloadingdoororremovethefilter

whilethereisstillwaterinthedrum.Otherwise,

risk of flooding and injury from hot water will

occur.

• Donotforceopenthelockedloadingdoor.The

loading door will be ready to open just a few

minutes after the washing cycle comes to an

end.Incaseofforcingtheloadingdoortoopen,

the door and the lock mechanism may get

damaged.

• Unplugtheproductwhennotinuse.

• Neverwashtheproductbyspreadingorpouring

water onto it! There is the risk of electric shock!

• Nevertouchtheplugwithwethands!Never

unplug by pulling on the cable, always pull out

by grabbing the plug.

• Usedetergents,softenersandsupplements

suitable for automatic washing machines only.

• Followtheinstructionsonthetextiletagsandon

the detergent package.

• Theproductmustbeunpluggedduring

installation, maintenance, cleaning and repairing

procedures.

• Alwayshavetheinstallationandrepairing

procedures carried out by the Authorized

Service Agent. Manufacturer shall not be

held liable for damages that may arise from

procedures carried out by unauthorized

persons.

Intended use

• Thisproducthasbeendesignedfordomestic

use.Itisnotsuitableforcommercialuseandit

must not be used out of its intended use.

• Theproductmustonlybeusedforwashingand

rinsing of laundry that are marked accordingly.

• Themanufacturerwaivesanyresponsibility

arisen from incorrect usage or transportation.

Children's safety

• Electricalproductsaredangerousforthe

children. Keep children away from the product

whenitisinuse.Donotletthemtotamperwith

theproduct.Usechildlocktopreventchildren

from intervening with the product.

• Donotforgettoclosetheloadingdoorwhen

leaving the room where the product is located.

• Storealldetergentsandadditivesinasafeplace

away from the reach of the children.

2 Installation

Refer to the nearest Authorised Service Agent for

installation of the product. To make the product ready

for use, review the information in the user manual

and make sure that the electricity, tap water supply

and water drainage systems are appropriate before

callingtheAuthorizedServiceAgent.Iftheyarenot,

callaqualifiedtechnicianandplumbertohaveany

necessary arrangements carried out.

C Preparation of the location and electrical, tap

water and waste water installations at the place

of installation is under customer's responsibility.

B Installationandelectricalconnectionsofthe

product must be carried out by the Authorized

Service Agent. Manufacturer shall not be

held liable for damages that may arise from

procedures carried out by unauthorized

persons.

A Prior to installation, visually check if the product

hasanydefectsonit.Ifso,donothaveit

installed.Damagedproductscauserisksfor

your safety.

C Make sure that the water inlet and discharge

hoses as well as the power cable are not

folded, pinched or crushed while pushing the

product into its place after installation or cleaning

procedures.

Appropriate installation location

• Placethemachineonarigidfloor.Donotplace

it on a long pile rug or similar surfaces.

• Totalweightofthewashingmachineandthe

dryer-withfullload-whentheyareplaced

3EN

ontopofeachotherreachestoapprox.180

kilograms. Place the product on a solid and flat

floor that has sufficient load carrying capacity!

• Donotplacetheproductonthepowercable.

• Donotinstalltheproductatplaceswhere

temperaturemayfallbelow0ºC.

• Placetheproductatleast1cmawayfromthe

edges of other furniture.

Removing packaging reinforcement

Tilt the machine backwards to remove the packaging

reinforcement. Remove the packaging reinforcement

by pulling the ribbon.

Removing the transportation locks

A Donotremovethetransportationlocksbefore

taking out the packaging reinforcement.

A Remove the transportation safety bolts before

operating the washing machine, otherwise, the

product will be damaged.

1. Loosen all the bolts with a spanner until they

rotate freely (C).

2. Remove transportation safety bolts by turning

them gently.

3. AttachtheplasticcoverssuppliedintheUser

Manual bag into the holes on the rear panel. (P)

C Keep the transportation safety bolts in a safe

place to reuse when the washing machine

needs to be moved again in the future.

C Never move the product without the

transportation safety bolts properly fixed in

place!

Connecting water supply

C Thewatersupplypressurerequiredtorunthe

productisbetween1to10bars(0.1–1MPa).

Itisnecessarytohave10–80litersofwater

flowing from the fully open tap in one minute

to have your machine run smoothly. Attach a

pressure reducing valve if water pressure is

higher.

C Ifyouaregoingtousethedoublewater-inlet

productasasingle(cold)water-inletunit,you

must install the supplied stopper to the hot

water valve before operating the product.

(Applies for the products supplied with a blind

stopper group.)

C Ifyouwanttousebothwaterinletsofthe

product, connect the hot water hose after

removing the stopper and gasket group from

the hot water valve. (Applies for the products

supplied with a blind stopper group.)

A Models with a single water inlet should not be

connectedtothehotwatertap.Insuchacase

the laundry will get damaged or the product will

switch to protection mode and will not operate.

A Donotuseoldorusedwaterinlethoseson

thenewproduct.Itmaycausestainsonyour

laundry.

1. Connect the special hoses supplied with the

product to the water inlets on the product. Red

hose(left)(max.90ºC)isforhotwaterinlet,blue

hose(right)(max.25ºC)isforcoldwaterinlet.

A Ensure that the cold and hot water connections

are made correctly when installing the product.

Otherwise,yourlaundrywillcomeouthotatthe

end of the washing process and wear out.

2. Tighten all hose nuts by hand. Never use a

wrench when tightening the nuts.

3. Openthetapscompletelyaftermakingthe

hose connection to check for water leaks at

theconnectionpoints.Ifanyleaksoccur,turn

off the tap and remove the nut. Retighten the

nut carefully after checking the seal. To prevent

water leakages and damages caused by them,

keep the taps closed when the machine is not in

use.

Connecting to the drain

• Theendofthedrainhosemustbedirectly

connected to the wastewater drain or to the

washbasin.

A Your house will be flooded if the hose comes out

of its housing during water discharge. Moreover,

there is risk of scalding due to high washing

temperatures! To prevent such situations and to

ensure smooth water intake and discharge of

the machine, fix the end of the discharge hose

tightly so that it cannot come out.

• Thehoseshouldbeattachedtoaheightofat

least40cm,and100cmatmost.

• Incasethehoseiselevatedafterlayingiton

the floor level or close to the ground (less than

40cmabovetheground),waterdischarge

becomes more difficult and the laundry may

come out excessively wet. Therefore, follow the

heights described in the figure.

Especificaciones del producto

Marca:	BEKO
Categoría:	lavadora
Modelo:	WMB 50621
Color del producto:	Black, Stainless steel
Peso.:	100 g
Ancho:	120 mm
Profundidad:	83 mm
Altura:	21 mm
Peso del embalaje:	150 g
Ancho del embalaje:	172 mm
Empaquetadura en profundidad:	144 mm
Altura del embalaje:	30 mm
Manual de usuario:	Ja
Indicadores LED:	Activity, Link, Speed
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Certificación:	CE, FCC
Interfaz:	Ethernet
Certificados de sostenibilidad:	RoHS
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000,10000 Mbit/s
Estándar de red:	IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3an, IEEE 802.3u
Temperatura de almacenamiento:	-20 - 60 °C
Interno:	Ja
Soporta el sistema operativo Mac:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Compatible con Linux:	Ja
Tipo de interfaz Ethernet:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Interfaz de host:	PCI Express
Velocidad máxima de transferencia de datos:	10000 Mbit/s
Controladores suministrados:	Ja
Sistemas operativos de servidor compatibles:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Compatibilidad con tramas gigantes:	Ja
Duplex completo:	Ja
Tecnología de cableado Ethernet de cobre:	10GBASE-T, 100BASE-T, 1000BASE-T
conjunto de chips:	Tehuti - TN4010, Marvell - 88X3310P
MDIX automático IEEE:	Ja
Wifi.:	Nee
Temperatura de funcionamiento (TT):	5 - 50 °C
Humedad relativa de funcionamiento (VV):	20 - 80 procent
Código del Sistema Armonizado (SA):	85176990
Marcos gigantes:	16000
soporte iSCSI:	Ja
versión PCI:	2.0
etiquetado VLAN:	Ja
Soporte de perfil bajo:	Ja