Bellman BE1443 Manual de Usario

Bellman Seguridad BE1443

Lee a continuación 📖 el manual en español para Bellman BE1443 (16 páginas) en la categoría Seguridad. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

N3583

US IPNMO01BERXT2 IC 66P3A-BERXT2

Flash Receiver

Model BE1442

input 7.5V 1500mA

For indoor use only

Made in the PRC

Flash Receiver

BE1442/1443

CMY

front-fold-5.pdf 1 10/29/2012 3:03:54 PM

Flash Receiver

BE1441

4 5 6

CMY

front-fold-6.pdf 1 2013/11/27 11:41:46

Appendix - Further information

Settings

No adjustments are required for normal use. The relevant descriptions are provided below,

if you wish to change a setting for some reason.

Radio key

In order to use several Bellman Visit Systems close to one another without interference,

dierent Radio Keys can be set on the dierent systems. All Bellman Visit System units are

supplied from the factory tuned to the same Radio Key, channel 0. This means that all Radio

Key Switches on the transmitters are set to the OFF position.

A Bellman Visit transmitter is also required to alter the radio key on the Bellman Visit Flash

Receiver. Proceed as follows to change the Radio Key:

 Set a Bellman Visit Transmitter to the desired Radio Key by altering its Radio Key

Switch to the desired Radio Key. See the transmitter user manual for further information.

 Hold down the Test Button (9) on the Bellman Visit Flash Receiver until the green

and yellow LEDs blink alternately. The Bellman Visit Flash Receiver will now be in

programming mode for about 30 seconds.

 Press the Bellman Visit transmitter’s test button.

 The LEDs will now blink ve times in quick succession to indicate a

successful change of radio key.

 After changing the radio key, the Bellman Visit Flash Receiver will automatically return

to normal mode.

Please note: all Bellman Visit products within a system must be tuned to the same Radio

Key in order to operate as a group.

Signal pattern

A Signal Pattern is the name for the way in which a receiver in the Bellman Visit System indi-

cates activation. Changing the transmitters’ Signal Switch changes the Signal Pattern which

the receivers display when the transmitter is activated.

The following signal patterns are available for the Bellman Visit System: (Please note that

the Flash Receiver does not emit any sound):

Especificaciones del producto

Marca:	Bellman
Categoría:	Seguridad
Modelo:	BE1443
Color del producto:	Wit
Peso.:	32780 g
Ancho:	2098 mm
Profundidad:	- mm
Altura:	1224 mm
Peso del embalaje:	44000 g
Ancho del embalaje:	2260 mm
Empaquetadura en profundidad:	1385 mm
Altura del embalaje:	60 mm
tecnología táctil:	Multi-touch
País de origen:	Nederland
Código aduanero de producto (TARIC):	96100000
Modelo:	Horizontaal
relación de aspecto:	16:9
Temperatura de almacenamiento:	-10 - 40 °C
Material del marco:	Aluminium
Fuente de alimentación a través de USB:	Ja
Cantidad de puntos de contacto simultáneos:	20
Kit de montaje en pared:	Ja
Temperatura de funcionamiento (TT):	-20 - 60 °C
Ruedas:	Nee
Área de trabajo:	1134 x 2008 mm
Diagonal:	91 "
Frame:	Ja
Resolución táctil:	32767 x 32767 Pixels
Tiempo de respuesta del sistema táctil:	5 ms
Tipo-de-instalación:	Vast
Color-de-superficie:	Staal
Bandeja para bolígrafos incluida:	Ja
Toque de precisión:	2 mm
Velocidad de respuesta del sistema táctil:	125 fps
Doble-cara:	Nee
Número de tableros de juego:	1