BeSafe iZi Flex FIX i-Size Manual de Usario
BeSafe
asiento de coche
iZi Flex FIX i-Size
Lee a continuación 📖 el manual en español para BeSafe iZi Flex FIX i-Size (101 páginas) en la categoría asiento de coche. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/101
a
c
b
d
i
l
j
k
g
e
f
h
m
5 6
7
8
9
4
2
3
1
n
USER MANUAL
Stature height 100-150 cm
Age 4-12 y UN regulation no. R129
110
116
122
128
134
140
146
152
158
164
170
176
182
193
199
205
8
14
20
26
32
38
44
50
56
62
68
74
80
86
92
98
104
8 9
! Vital information
• For the correct usage of the airbag in combination with the seat;
read the vehicle handbook.
• For the suitable positions in the car, read the vehicle handbook.
• BeSafe recommends to install the seat in all vehicle seat positions
which are intended to be used and check installation, available
space in the vehcile and position of the child, to verify if the seat is
acceptable for your situation.
• iZi Flex FIX i-Size can be installed forward-facing with the ISOFIX
anchorage in a vehicle equipped with ISOFIX anchorage points, in
combination with a 3-point belt, approved to UN/ECE Regulation
No.16 or other. When there is no ISOFIX anchorage available in the
vehicle position, iZi Flex FIX i-Size can be installed forward-facing
with a 3-point belt, approved to UN/ECE Regulation No.16 or other.
• iZi Flex FIX i-Size is approved for stature height 100 cm - 150 cm,
in the forward-facing direction.
• When used for stature heights between 135 cm. and 150 cm iZi
Flex FIX i-Size might not fit in all vehicles, due to a low position of
the vehicle roof at the side.
• Before every use, make sure that the 3-point belt is not damaged
or twisted and installed tight.
• When used without the isofix anchorages connected, the
seat should always be restrained by the vehicle belt when it is
transported without the child.
• When the child is taller then 150 cm. or the shoulders exceed the
highest position of the shoulderbelt guiders, the child must change
to a seat suitable for longer children, normally the vehcile seat.
• After an accident, the seat must be replaced. Although it may
look undamaged, if you were to have another accident, the seat
may not be able to protect your child to the level to which it was
designed.
• Prevent the seat from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
• DO NOT attempt to dismantle a part, which is not intented to be
removed, modify or add any part to the seat. Warranty will be void
26
28 29 30
27
13
10 11 24 25
15
21 22 23
19 20
14
12
17
16 18
Thank you for choosing BeSafe iZi Flex FIX i-Size
! It is important that you read this user manual BEFORE
installing your seat. Incorrect installation could endanger
your child.
10 11
• Adjustable headrest
• Shoulderbelt lock
• Shoulderbelt guide
• Lapbelt guider
• Reclining handles (2x)
• Base
• ISOfix release handle
• SIP bumper
• Height adjustment handles (2x)
• ISOfix connectors (2x)
• ISOfix release buttons (2x)
• ISOfix indicators (2x)
• ISOfix vehicle anchorage (2x)
• PAD+
(1a)
(1b)
(1c)
(1d)
(1e)
(1f)
(1g)
(1h)
(1i)
(1j)
(1k)
(1l)
(1m)
(1n)
Preparing to install
Installation
1. When installing the seat in the front vehicle seat make sure the
backrest of the vehicle seat is in an upright position.
2. Position the seat inside the vehicle.
3. Pull the ISOfix release handle to release the ISOfix connectors. A
button on top of the handle will keep the handle in the released
position and locks the ISOfix connectors to slide in the base again.
(2) The ISOfix arms lock only in the position where it is totally
extended. In this locked position 2 red marks next to the button on
the handle will become visible. (3)
4. Click the ISOfix connectors to the ISOfix anchorage points in the
vehicle seat (4). Make sure that all ISOfix indicators are GREEN. (5, 6)
5. Press the button on top of the ISOfix release handle (located
between the red marks) down and push the handle back into the
base. (7, 8) Push the seat as far as possible towards the backrest of
the vehicle seat. (9)
6. Make sure the back of the seat is touching the backrest of the vehicle
seat. If the headrest of the vehicle is pushing the seat away from the
backrest, adjust the headrest.
7. If the seat cannot be used in combination with ISOfix anchorage
points in the vehicle seat, the ISOfix connectors can be stowed inside
the seat and the seat can be used in combination with the 3-point
belt only.
8. Slide the shoulderbelt in the shoulderbelt guide. (10) Make sure the
belt is not twisted and that the shoulderbelt guide is closed again to
keep the belt inside. (11)
9. The seat is delivered with removable SIP+ (side impact protection
+). This extra side impact protection should be used on the door
side of the vehicle. It can be connected on the outside of the side
bumper in 2 slots. The seat already oers high level integrated side
impact protection. This extra side impact protection improves the
protection in a side impact still further. (12)
10. Do not use the SIP+ on the seat when the space between seat and
door of the vehicle is too small, which might lead to a situation
where the seat is not positioned correctly on the vehicle seat.
1. Adjust the headrest to the correct height by turning the height
adjuster handle. (13) Make sure that the shoulder belt is level with
your child’s shoulder. (14)
2. The seat can be positioned in 2 positions by pulling the reclining
handle upwards and pushing the seat forwards or backwards. Position
the seat in the correct position before positioning the child with the
vehicle belt. (15)
3. Position the vehicle belt in front of the child and lock the belt into the
buckle of the vehicle. (16, 17)
4. BeSafe recommends to use the lapbelt guider to keep the child
seated in the optimum upright position. To use the lapbelt guider
position the lapbelt through the lapbelt guider.
5. The PAD+ must be used around the shoulder vehicle belt and
positioned between the chin and the chest of the child.
6. Remove slack in the belt by pulling the belt towards the retractor. (18)
Positioning of the child
Removing the seat
1. Remove the shoulderbelt out of the shoulderbelt guide by pushing
the shoulderbelt lock in the guider up and slide the belt out. (19, 20)
2. Pull the ISOfix release handle to release the ISOfix connectors. (21)
In this way the base of the seat can move forwards and the ISOfix
release buttons can be operated. (22)
3. Release both ISOfix connectors, by pushing down the release
buttons. (23) Slide the arms with ISOfix connectors inside the seat
before you remove the seat from the vehicle. To be able to slide
the arms with ISOfix connectors inside the seat, press the button
(between the red marks) on top of the ISOfix release handle down.
4. Remove the seat from the vehicle.
Especificaciones del producto
| Marca: | BeSafe |
| Categoría: | asiento de coche |
| Modelo: | iZi Flex FIX i-Size |
¿Necesitas ayuda?
Si necesitas ayuda con BeSafe iZi Flex FIX i-Size haz una pregunta a continuación y otros usuarios te responderán
asiento de coche BeSafe Manuales
13 Septiembre 2024
13 Septiembre 2024
13 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
8 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
asiento de coche Manuales
- asiento de coche ABC Design
- asiento de coche Joie
- asiento de coche Maxi-Cosi
- asiento de coche Chicco
- asiento de coche Jane
- asiento de coche Britax
- asiento de coche Cybex
- asiento de coche Bebe Confort
- asiento de coche Dometic
- asiento de coche Hauck
- asiento de coche Xomax
- asiento de coche Inglesina
- asiento de coche Bugaboo
- asiento de coche Nuna
- asiento de coche Lorelli
- asiento de coche Fisher Price
- asiento de coche Osann
- asiento de coche Plebani
- asiento de coche Evenflo
- asiento de coche Graco
- asiento de coche Brevi
- asiento de coche Stokke
- asiento de coche Safety 1st
- asiento de coche Peg Perego
- asiento de coche Nania
- asiento de coche Kinderkraft
- asiento de coche Baninni
- asiento de coche Clek
- asiento de coche Hema
- asiento de coche Mountain Buggy
- asiento de coche Lionelo
- asiento de coche Foppapedretti
- asiento de coche Silver Cross
- asiento de coche Recaro
- asiento de coche Britax-Romer
- asiento de coche Concord
- asiento de coche Phil And Teds
- asiento de coche Baby Jogger
- asiento de coche Be Cool
- asiento de coche Kiddy
- asiento de coche Bertoni
- asiento de coche Joolz
- asiento de coche Storchenmuhle
- asiento de coche BabyGO
- asiento de coche Xadventure
- asiento de coche Chipolino
- asiento de coche Uppababy
- asiento de coche Giordani
- asiento de coche Romer
- asiento de coche Cosatto
- asiento de coche Migo
- asiento de coche Bellelli
- asiento de coche Burigotto
- asiento de coche Caretero
- asiento de coche Ellermeyer
- asiento de coche Axkid
- asiento de coche Gesslein
- asiento de coche Renolux
- asiento de coche Infasecure
- asiento de coche Avova
- asiento de coche Cangaroo
- asiento de coche Klippan
- asiento de coche Quax
- asiento de coche Kikka Boo
- asiento de coche Hipod
- asiento de coche Kindercraft
- asiento de coche Walser
- asiento de coche Casualplay
- asiento de coche Kiwy
- asiento de coche Dreambee
- asiento de coche GB
- asiento de coche Hamron
- asiento de coche Apramo
- asiento de coche Mothers Choice
Últimos asiento de coche Manuales
27 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
26 Octubre 2024
25 Octubre 2024
21 Octubre 2024
20 Octubre 2024
19 Octubre 2024