Black And Decker 11683 Manual de Usario

Black And Decker lijadora 11683

Lee a continuación 📖 el manual en español para Black And Decker 11683 (16 páginas) en la categoría lijadora. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

Form No. 589307-01 APR. ‘05 Printed in China

CAUTION:

Before using this product,

read this manual and follow

all its Safety Rules and

Operating Instructions.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA

www.sears.com/craftsman

• Safety

• Operation

• Maintenance

• Parts List

• Español Pág. 9

MOUSE SANDER / POLISHER

Instruction Manual

Model 900.11683

589307-01,11683 Sears 4/25/05 2:36 PM Page 1

ONE YEAR FULL WARRANTY ON CRAFTSMAN TOOL

If this Craftsman tool fails to give complete satisfaction within one year from date of

purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES,

and Sears will replace it, free of charge.

If this Craftsman tool is used for commercial or rental purposes, this warranty applies

for only 90 days from the date of purchase.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179

WARNING: Read and understand all

instructions. Failure to follow all

instructions listed below may result in

electric shock, fire and/or serious personal

injury.

SAVE THESE

INSTRUCTIONS

WORK AREA

•Keep your work area clean and well lit.

Cluttered benches and dark areas invite

accidents.

•Do not operate power tools in

explosive atmospheres, such as in the

presence of flammable liquids, gases,

or dust. Power tools create sparks which

may ignite the dust or fumes.

•Keep bystanders, children, and

visitors away while operating a power

tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

•Double insulated tools are equipped

with a polarized plug (one blade is

wider than the other.) This plug will fit

in a polarized outlet only one way. If

the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

a polarized outlet. Do not change the

plug in any way. Double insulation

eliminates the need for the three

wire grounded power cord and grounded

power supply system.

•Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators. There is an

increased risk of electric shock if your

body is grounded.

•Don’t expose power tools to rain or

wet conditions. Water entering a power

tool will increase the risk of electric shock.

•Do not abuse the cord. Never use the

cord to carry the tools or pull the plug

from an outlet. Keep cord away from

heat, oil, sharp edges or moving parts.

Replace damaged cords immediately.

Damaged cords increase the risk of

electric shock.

•When operating a power tool outside,

use an outdoor extension cord marked

"W-A" or "W." These cords are rated for

outdoor use and reduce the risk of

electric shock.

PERSONAL SAFETY

•Stay alert, watch what you are doing

and use common sense when

operating a power tool. Do not use tool

while tired or under the influence of

drugs, alcohol, or medication. A

moment of inattention while operating

power tools may result in serious personal

injury.

•Dress properly. Do not wear loose

clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves

away from moving parts. Loose

clothing, jewelry, or long hair can be

caught in moving parts. Air vents cover

moving parts and should be avoided.

•Avoid accidental starting. Be sure

switch is off before plugging in.

Carrying tools with your finger on the

switch or plugging in tools that have the

switch on invites accidents.

•Remove adjusting keys or wrenches

before turning the tool on. A wrench or

key that is left attached to a rotating part

of the tool may result in personal injury.

•Do not overreach. Keep proper footing

and balance at all times. Proper footing

and balance enables better control of the

tool in unexpected situations.

•Use safety equipment. Always wear

eye protection. Dust mask, non-skid

safety shoes, hard hat, or hearing

GENERAL SAFETY RULES

SEARS WARRANTY

589307-01,11683 Sears 4/25/05 2:36 PM Page 2

protection must be used for appropriate

conditions.

TOOL USE AND CARE

•Use clamps or other practical way to

secure and support the workpiece to a

stable platform. Holding the work by

hand or against your body is unstable

and may lead to loss of control.

•Do not force tool. Use the correct tool

for your application. The correct tool

will do the job better and safer at the rate

for which it is designed.

•Do not use tool if switch does not turn

it on or off. Any tool that cannot be

controlled with the switch is dangerous

and must be repaired.

•Disconnect the plug from the power

source before making any

adjustments, changing accessories,

or storing the tool. Such preventative

safety measures reduce the risk of

starting the tool accidentally.

•Store idle tools out of reach of

children and other untrained persons.

Tools are dangerous in the hands of

untrained users.

•Maintain tools with care. Keep cutting

tools sharp and clean. Properly

maintained tools, with sharp cutting

edges are less likely to bind and are

easier to control.

•Check for misalignment or binding of

moving parts, breakage of parts, and

any other condition that may affect the

tools operation. If damaged, have the

tool serviced before using. Many

accidents are caused by poorly

maintained tools.

•Use only accessories that are

recommended by the manufacturer for

your model. Accessories that may be

suitable for one tool, may become

hazardous when used on another tool.

SERVICE

•Tool service must be performed only

by qualified repair personnel. Service

or maintenance performed by unqualified

personnel could result in a risk of injury.

•When servicing a tool, use only

identical replacement parts. Follow

instructions in the Maintenance

section of this manual. Use of

unauthorized parts or failure to follow

Maintenance Instructions may create a

risk of electric shock or injury.

• The label on your tool may include the

following symbols.

V..............volts

A..............amperes

Hz............hertz

W ............watts

min ..........minutes

............alternating current

........direct current

no ............no load speed

............Class II Construction

…/min......revolutions or reciprocation

................per minute

............earthing terminal

............safety alert symbol

• ALWAYS WEAR EYE PROTECTION.

• Clean your tool out periodically.

CAUTION: Wear appropriate hearing

protection during use. Under some

conditions and duration of use, noise from

this product may contribute to hearing loss.

•Hold tool by insulated gripping

surfaces when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a "live" wire will make

exposed metal parts of the tool "live" and

shock the operator.

WARNING: Some dust created by

power sanding, sawing, grinding,

drilling, and other construction

activities contains chemicals known to

cause cancer, birth defects or other

reproductive harm. Some examples of

these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from chemically-

treated lumber. (CCA)

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemicals:work in a well ventilated area,

and work with approved safety equipment,

such as those dust masks that are

specially designed to filter out microscopic

particles.

•Avoid prolonged contact with dust

from power sanding, sawing, grinding,

drilling, and other construction

activities. Wear protective clothing

and wash exposed areas with soap

and water. Allowing dust to get into your

mouth, eyes, or lay on the skin may

promote absorption of harmful chemicals.

WARNING: Use of this tool can

generate and/or disburse dust, which

SAFETY WARNINGS AND

INSTRUCTIONS: SANDERS

589307-01,11683 Sears 4/25/05 2:36 PM Page 3

Especificaciones del producto

Marca:	Black And Decker
Categoría:	lijadora
Modelo:	11683
Color del producto:	Zwart
Peso del embalaje:	28000 g
Ancho del embalaje:	1409 mm
Empaquetadura en profundidad:	177 mm
Altura del embalaje:	844 mm
Bluetooth:	Ja
Diagonal de la pantalla:	55 "
Resolución:	3840 x 2160 Pixels
Relación de aspecto original:	16:9
Estándares wifi:	Wi-Fi 5 (802.11ac)
Versión Bluetooth:	5.2
Incluye sistema operativo:	Tizen
red LAN:	Ja
Ángulo de visión, horizontal:	178 °
Ángulo de visión, vertical:	178 °
Forma de pantalla:	Flat
Brillo:	- cd/m²
Número de puertos USB 2.0:	2
Número de puertos HDMI:	4
Número de puertos Ethernet LAN (RJ-45):	1
Televisión inteligente:	Ja
Energía promedio:	60 W
Consumo de energía (en espera):	0.5 W
Wi-Fi directo:	Ja
Tecnología de alto rango dinámico (HDR):	High Dynamic Range 10+ (HDR10 Plus), Quantum HDR 2000
Soporte HDR:	Ja
tipo HD:	4K Ultra HD
Versión HDMI:	2.1
Tecnología de visualización:	QLED
Tiempo de respuesta:	6 ms
Montaje VESA:	Ja
Interfaz de montaje en panel:	200 x 200 mm
Pantalla antirreflejos:	Ja
Profundidad (sin base):	25.9 mm
Altura (sin base):	705.6 mm
Ancho (sin base):	1227.4 mm
Peso (sin base):	17700 g
Diámetro de la pantalla en centímetros.:	138 cm
Audio digital, salida óptica.:	1
Interfaz común Plus (CI+):	Ja
tipo de sintonizador:	Analoog & digitaal
Formato de señal digital:	DVB-C, DVB-S2, DVB-T2 HD
televisión por internet:	Ja
Cambio de hora:	Ja
Televisión híbrida de banda ancha (HbbTV):	Ja
Funciona con Amazon Alexa:	Ja
Decodificadores de audio incorporados:	Dolby Atmos
Consumo de energía (HDR) por 1000 horas:	188 kWu
Clase de eficiencia energética (SDR):	F
Consumo de energía (DEG) por 1000 horas:	84 kWu
Clase de eficiencia energética (HDR):	F
navegador web:	Ja
Ancho del dispositivo (con soporte):	1227.4 mm
Dispositivo de profundidad (con soporte):	235.6 mm
Altura del dispositivo (con soporte):	768 mm
Peso (con soporte):	21900 g
AMD FreeSync:	Ja
subwoofer incorporado:	Ja
Teletexto:	Ja
Hojeada:	Ja
Versión híbrida de televisión de banda ancha (HbbTV):	2.0.3
Frecuencia de actualización nativa:	100 Hz
Tecnología de interpolación de movimiento:	PQI (Picture Quality Index) 4600
Tecnología de decodificación de sonido.:	Dolby Digital Plus
Búsqueda automática de canales:	Ja
Modo de juego:	Ja
Número de sintonizadores:	2 tuner(s)
Diseño sin marco:	Ja
Duplicación de sonido:	Ja
Nombre comercial relación de contraste dinámico:	Quantum Matrix Technology
Tipo AMD FreeSync:	FreeSync Premium Pro
guía universal:	Ja
ConectarCompartir (USB):	Ja
ConectarCompartir (HDD):	Ja
Mando a distancia incluido:	Ja
Wifi.:	Ja
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	117 W
Funciona con el Asistente de Google:	Ja
Tecnologías específicas de marca:	Motion Xcelerator Turbo Pro
Características del juego:	Auto Low Latency Mode (ALLM), Dynamic Black EQ, Game Bar, Game Motion Plus, Super Ultra Wide Game View
Modo ambiente:	Ambient Mode+
Sonido de seguimiento de objetos+ (OTS+):	Ja
Sala múltiple:	Ja
Año de introducción:	2022
soporte IPv6:	Ja
Cambio rápido HDMI:	Ja
Q-Sinfonía:	Ja
Amplificador de voz activa / Amplificador de voz activa (AVA):	Ja
Sensor ecológico:	Ja