Black And Decker BDEQS15C Manual de Usario
Black And Decker
lijadora
BDEQS15C
Lee a continuación 📖 el manual en español para Black And Decker BDEQS15C (28 páginas) en la categoría lijadora. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/28
To register your new product, visit
www.BlackandDecker.com/NewOwner
INSTRUCTION MANUAL
1/4 SHEET SANDER
Thank you for choosing BLACK+ ! DECKER
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+ DECKER
purchase, go to http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPA OL EN LA CONTRAPORTADA.N
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
BDEQS15C
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) . Keep work area clean and well lit Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c) . Do not expose power tools to rain or wet conditions Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have
the switch on invites accidents.
d) . Remove any adjusting key or wrench before turning the power tool on A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to
protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help
you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT
safety glasses. Also use face or dust mask if operation is dusty. ALWAYS
WEAR CERTIFIED SAFETY EQUIPMENT:
•ANSI Z87.1 eye protection (CAN/CSA Z94.3)
•ANSI S12.6 (S3.19) hearing protection
•NIOSH/OSHA/MSHA respiratory protection
•Sanding of lead-based paint is not recommended. Sanding Lead Based Paint See
for additional information before sanding paint.
•Cleanyourtooloutperiodically.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State of California to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
•leadfromlead-basedpaints,
•crystallinesilicafrombricksandcementandothermasonryproducts,and
•arsenicandchromiumfromchemically-treatedlumber.
Yourriskfromtheseexposuresvaries,dependingonhowoftenyoudothistypeofwork.
Toreduceyourexposuretothesechemicals:workinawellventilatedarea,andwork
withapprovedsafetyequipment,suchasthosedustmasksthatarespeciallydesignedto
filter out microscopic particles.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,
and other construction activities. Wear protective clothing and wash exposed
areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the
skinmaypromoteabsorptionofharmfulchemicals.
3
Especificaciones del producto
| Marca: | Black And Decker |
| Categoría: | lijadora |
| Modelo: | BDEQS15C |
¿Necesitas ayuda?
Si necesitas ayuda con Black And Decker BDEQS15C haz una pregunta a continuación y otros usuarios te responderán
lijadora Black And Decker Manuales
6 Octubre 2024
5 Octubre 2024
3 Octubre 2024
10 Septiembre 2024
24 Agosto 2024
20 Agosto 2024
16 Agosto 2024
15 Agosto 2024
15 Agosto 2024
11 Agosto 2024
lijadora Manuales
- lijadora Bosch
- lijadora AEG
- lijadora DeWalt
- lijadora Arendo
- lijadora Silverline
- lijadora Ferm
- lijadora Workzone
- lijadora Ozito
- lijadora Makita
- lijadora Hitachi
- lijadora Vonroc
- lijadora Stanley
- lijadora Skil
- lijadora Hyundai
- lijadora Hilti
- lijadora Ryobi
- lijadora Festool
- lijadora Metabo
- lijadora Parkside
- lijadora Worx
- lijadora Meec Tools
- lijadora Milwaukee
- lijadora Hikoki
- lijadora Hazet
- lijadora Einhell
- lijadora Maktec
- lijadora Bort
- lijadora Power Craft
- lijadora Powerplus
- lijadora Porter-Cable
- lijadora Topcraft
- lijadora Scheppach
- lijadora Gamma
- lijadora Matrix
- lijadora Bavaria
- lijadora Flex
- lijadora Duro
- lijadora Varo
- lijadora Max
- lijadora Truper
- lijadora Kinzo
- lijadora Cocraft
- lijadora Meister Craft
- lijadora RIDGID
- lijadora Rupes
- lijadora Proxxon
- lijadora Elu
- lijadora Global
- lijadora King Craft
- lijadora Rikon
- lijadora Duro Pro
- lijadora Alpha Tools
- lijadora Toledo
- lijadora Ribimex
- lijadora FIXIT
- lijadora Einhell Bavaria
- lijadora Ergotools Pattfield
- lijadora McKenzie
- lijadora Proviel
- lijadora Bavaria By Einhell
- lijadora THUN
- lijadora Pevec
- lijadora Handwerk
- lijadora TAURUS Titanium
- lijadora Stalco
Últimos lijadora Manuales
27 Octubre 2024
20 Octubre 2024
19 Octubre 2024
14 Octubre 2024
14 Octubre 2024
10 Octubre 2024
8 Octubre 2024
7 Octubre 2024
5 Octubre 2024
5 Octubre 2024