Black And Decker RS250 Manual de Usario

Black And Decker Niet gecategoriseerd RS250

Lee a continuación 📖 el manual en español para Black And Decker RS250 (24 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE

GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL

PRODUCTO.

CATALOG NUMBER - RS250

INSTRUCTION MANUAL

BEFORE RETURNING

THIS PRODUCT

FOR ANY REASON

PLEASE CALL

1 800 544 6986

IF YOU SHOULD EXPERIENCE

A PROBLEM

WITH YOUR BLACK & DECKER

PRODUCT,

CALL 1 800 544 6986

BEFORE YOU CALL, HAVE THE

FOLLOWING INFORMATION AVAILABLE,

CATALOG No., TYPE No., AND DATE CODE

(e.g. 0130M). IN MOST CASES, ABLACK &

DECKER REPRESENTATIVE CAN

RESOLVE YOUR PROBLEM OVER THE

PHONE. IF YOU HAVE ASUGGESTION OR

COMMENT, GIVE US ACALL. YOUR

FEEDBACK IS VITALTO BLACK & DECKER.

611197-01 RS250 Rotary Tool 10/22/02 2:27 PM Page 1

WARNING:Read and understand all

instructions. Failure to follow all

instructions listed below may result in

electric shock, fire and/or serious personal

injury.

SAVE THESE INSTRUCTIONS

Work Area

•Keep your work area clean and well

lit. Cluttered benches and dark areas

invite accidents.

•Do not operate power tools in

explosive atmospheres, such as in

the presence of flammable liquids,

gases, or dust. Power tools create

sparks which may ignite the dust or

fumes. Use in well ventilated areas only.

•Keep bystanders, children, and

visitors away while operating a power

tool. Distractions can cause you to lose

control.

Electrical Safety

•Double insulated tools are equipped

with a polarized plug (one blade is

wider than the other.) This plug will fit

in a polarized outlet only one way. If

the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to

install a polarized outlet. Do not

change the plug in any way. Double

insulation eliminates the need for the

three wire grounded power cord and

grounded power supply system.

•Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators. There is an

increased risk of electric shock if your

body is grounded.

•Don’t expose power tools to rain or

wet conditions. Water entering a power

tool will increase the risk of electric

shock.

•Do not abuse the cord. Never use the

cord to carry the tools or pull the plug

from an outlet. Keep cord away from

heat, oil, sharp edges or moving

parts. Replace damaged cords

immediately. Damaged cords increase

the risk of electric shock.

•When operating a power tool outside,

use an outdoor extension cord

marked "W-A" or "W." These cords are

rated for outdoor use and reduce the risk

of electric shock.

Personal Safety

•Stay alert, watch what you are doing

and use common sense when

operating a power tool. Do not use

tool while tired or under the influence

of drugs, alcohol, or medication. A

moment of inattention while operating

power tools may result in serious

personal injury.

•Dress properly. Do not wear loose

clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves

away from moving parts. Loose

clothing, jewelry, or long hair can be

caught in moving parts. Air vents cover

moving parts and should be avoided.

•Avoid accidental starting. Be sure

switch is off before plugging in.

Carrying tools with your finger on the

switch or plugging in tools that have the

switch on invites accidents.

•Remove adjusting keys or wrenches

before turning the tool on. A wrench or

key that is left attached to a rotating part

of the tool may result in personal injury.

•Do not overreach. Keep proper

footing and balance at all times.

Proper footing and balance enables

better control of the tool in unexpected

situations.

•Use safety equipment. Always wear

eye protection. Dust mask, non-skid

safety shoes, hard hat, or hearing

protection must be used for appropriate

conditions.

Tool Use and Care

•Use clamps or other practical way to

secure and support the workpiece to

a stable platform. Holding the work by

hand or against your body is unstable

and may lead to loss of control.

•Do not force tool. Use the correct tool

for your application. The correct tool

will do the job better and safer at the rate

for which it is designed.

•Do not use tool if switch does not

turn it on or off. Any tool that cannot be

controlled with the switch is dangerous

and must be repaired.

•Disconnect the plug from the power

source before making any

adjustments, changing accessories,

or storing the tool. Such preventative

safety measures reduce the risk of

starting the tool accidentally.

•Store idle tools out of reach of

children and other untrained

persons. Tools are dangerous in the

hands of untrained users.

•Maintain tools with care. Keep cutting

tools sharp and clean. Properly

maintained tools, with sharp cutting

edges are less likely to bind and are

easier to control.

•Check for misalignment or binding of

611197-01 RS250 Rotary Tool 10/22/02 2:27 PM Page 2

moving parts, breakage of parts, and

any other condition that may affect

the tools operation. If damaged, have

the tool serviced before using. Many

accidents are caused by poorly

maintained tools.

•Use only accessories that are

recommended by the manufacturer

for your model. Accessories that may

be suitable for one tool, may become

hazardous when used on another tool.

Service

•Tool service must be performed only

by qualified repair personnel. Service

or maintenance performed by unqualified

personnel could result in a risk of injury.

•When servicing a tool, use only

identical replacement parts. Follow

instructions in the Maintenance

section of this manual. Use of

unauthorized parts or failure to follow

Maintenance Instructions may create a

risk of electric shock or injury.

Specific Safety Rules

•Hold tool by insulated gripping

surfaces when performing an

operation where the cutting tool may

contact hidden wiring or its own cord.

Contact with a "live" wire will make

exposed metal parts of the tool "live" and

shock the operator.

• The label on your tool may include the

following symbols.

V..............volts

A..............amperes

Hz............hertz

W ............watts

min ..........minutes

............alternating current

........direct current

no ............no load speed

............Class II Construction

…/min......revolutions or reciprocation

................per minute

............earthing terminal

............safety alert symbol

WARNING: Some dust created by power

sanding, sawing, grinding, drilling, and other

construction activities contains chemicals

known to cause cancer, birth defects or

other reproductive harm. Some examples of

these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement

and other masonry products, and

• arsenic and chromium from chemically-

treated lumber (CCA).

Your risk from these exposures varies,

depending on how often you do this type of

work. To reduce your exposure to these

chemicals: work in a well ventilated area,

and work with approved safety equipment,

such as those dust masks that are specially

designed to filter out microscopic particles.

•Avoid prolonged contact with dust

from power sanding, sawing, grinding,

drilling, and other construction

activities. Wear protective clothing

and wash exposed areas with soap

and water. Allowing dust to get into your

mouth, eyes, or lay on the skin may

promote absorption of harmful chemicals.

CAUTION: Wear appropriate hearing

protection during use. Under some

conditions and duration of use, noise

from this product may contribute to

hearing loss.

CAUTION: Do not touch the bit or

collet nut during or immediately after

cutting material. The bit and collet nut

may be hot enough to burn bare skin.

WARNING: After changing bits or

making any adjustments, make sure the

collet nut is securely tightened to avoid

injury.

WARNING: Do not press spindle lock

while motor is running. The operator may

lose control and drop the tool. Personal

injury or serious tool damage may result.

WARNING: Shut off all live electric

circuits to any areas where cut outs will be

made, to avoid fire or serious personal

injury.

•Always wear eye protection. Dust mask

or hearing protection must be used for

appropriate conditions. Using personal

safety devices is recommended. WORK

SAFE.

•Always operate the tool with the

depth guide in place. The guide keeps

the bit from plunging too deeply through

the material. A minimum of penetration

should be maintained to eliminate the

danger of cutting into electric wiring.

•Do not lay the tool down until the

motor has come to a complete stop.

The spinning motor may cause the tool

to roll off a table or into a piece of

material damaging the bit.

•Be sure your cutting bits are sharp

611197-01 RS250 Rotary Tool 10/22/02 2:27 PM Page 3

Especificaciones del producto

Marca:	Black And Decker
Categoría:	Niet gecategoriseerd
Modelo:	RS250
Color del producto:	Zwart
Mostrar.:	LED
Diagonal de la pantalla:	20 "
Resolución:	1600 x 900 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Ángulo de visión, horizontal:	90 °
Ángulo de visión, vertical:	65 °
Relación de contraste típica:	700:1
Puerto(s) VGA (D-Sub):	1
Opción de montaje de bloqueo de cable:	Ja
Altavoces incorporados:	Nee
Consumo de energía (en espera):	0.3 W
Pantalla, número de colores.:	16.78 miljoen kleuren
Tecnología de visualización:	LED
Tiempo de respuesta:	5 ms
Tamaño de píxel:	0.276 x 0.276 mm
Resoluciones de gráficos compatibles:	1600 x 900
Montaje VESA:	Ja
Interfaz de montaje en panel:	100 x 100 mm
Puertos DVI-D:	1
Certificados de sostenibilidad:	ENERGY STAR
Brillo (típico):	200 cd/m²
relación de aspecto:	16:9
Relación de contraste (dinámica):	12000000:1
Sintonizador de TV integrado:	Nee
Cámara integrada:	Nee
Profundidad (sin base):	164 mm
Altura (sin base):	371 mm
Ancho (sin base):	491 mm
Peso (sin base):	2960 g
Visualización en pantalla (OSD):	Ja
Número de idiomas de visualización en pantalla:	17
Cliente ligero instalado:	Nee
Tipo de panel:	TN+Film
voltaje-de-entrada-de-CA:	96 - 264 V
Consumo de energía (típico):	16 W
Rango de ángulo de inclinación:	-5 - 15 °
ajustes de inclinación:	Ja