Bowers And Wilkins CDA-16 Manual de Usario

Lee a continuación 📖 el manual en español para Bowers And Wilkins CDA-16 (73 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/73
CDA-16
Distribution
Amplier
2
ENGLISH
bowerswilkins.com
Welcome to Bowers & Wilkins and CDA-16
Thank you for choosing Bowers & Wilkins. When John Bowers rst
established our company, he did so in the belief that imaginative design,
innovative engineering and advanced technology were keys that could unlock
the enjoyment of audio in the home. His belief is one that we continue to share
and inspires every product we design, tailored for new audio experiences outside
of the home.
Our CDA-16 distribution power amplier can drive any Bowers & Wilkins custom
installation speaker to new heights of performance. Offering 16 channels of
power, the CDA-16 can enable your whole home with sound yet takes up
minimal space thanks to its compact 1U design. Its congurable specication
supports bridging of its Class D stereo channels into even more powerful mono
outputs, if needed.
Features
16 channels distribution amplication in 8 zones with a powerful 100 watts
per channel to deliver high-resolution audio.
Engineered to work with any Bowers & Wilkins installation speakers.
Highly exible usage / conguration Zone L/R outputs can be bridged to
provide a mono output of double the power.
Three power mode control options on, auto detect or 12V trigger.
Robust and reliable protection features, preventing damage due to overload,
short circuits or heat.
Ultra-compact rack-mount design (1 rack unit), easy to install and congure.
3
ENGLISH
1. CDA-16 Carton Contents
1 x Power cable
2 x Rack-mount ears
4 x Rack-mount ears screws
4 x Feet
4 x Feet screws
8 x 5.08mm Pitch 4-way Phoenix Combicon style
2. Installation
2.1 Rack mounting
CDA-16 is intended to be installed in a standard 19-
inch equipment rack. It is supplied with rack mount
ears, but not rack mount bolts and nuts. Ensure
that, once mounted in the rack, the amplier is well
ventilated and that the ventilation apertures are not
obstructed. If the system is taken out of use for a
long period, disconnect the amplier from the mains
power supply.
The CDA-16 is supplied with two rack mounting ears
for installation in standard equipment racks. Attach
the brackets by inserting machine screws through
each bracket into the threaded holes in the side of
the amplier, see Diagram 2.
To prevent damage, maintain adequate
ventilation space to the sides of the
amplier. CDA-16 can be stacked vertically
but be sure not to place the amplier next to other
components, or against the side of a cabinet. Doing
so will block ventilation openings.
2.2 Foot mounting
CDA-16 can also be table mounted and is supplied
with feet and feet screws, see Diagram 3.
Ensure that, once positioned, the amplier is well
ventilated and that the ventilation apertures are not
obstructed. If the system is taken out of use for a
long period, disconnect the amplier from the mains
power supply.
To prevent damage, maintain adequate
ventilation space to the sides of the
amplier. CDA-16 can be stacked vertically
but be sure not to place the amplier next to other
components, or against the side of a cabinet. Doing
so will block ventilation openings.
Diagram 2
Rack mounting
Diagram 3
Foot mounting
Diagram 1
Contents
1 x
1 x 8 x4 x
4 x
4 x
2 x
cool airwarm air

Especificaciones del producto

Marca: Bowers And Wilkins
Categoría: Vocero
Modelo: CDA-16

¿Necesitas ayuda?

Si necesitas ayuda con Bowers And Wilkins CDA-16 haz una pregunta a continuación y otros usuarios te responderán




Vocero Bowers And Wilkins Manuales

Vocero Manuales

Últimos Vocero Manuales