Brother MFC-L3740CDWE Manual de Usario

Brother Impresora MFC-L3740CDWE

Lee a continuación 📖 el manual en español para Brother MFC-L3740CDWE (2 páginas) en la categoría Impresora. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/2
Unpack the machine and check the components
1Remove the packing materials and re-install the toner cartridge and drum unit assemblies
2Load paper in the paper tray
3Connect the power cord and turn the machine on
Back
Adjust the paper
guides.
Do not exceed this mark.
x4
Remove the orange parts
from each cartridge.
Quick Setup Guide
Read the for the correct installation procedure.Product Safety Guide Quick Setup Guide first, then read this
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Video setup instructions:
support.brother.com/videos
EN
DCP-L3515CDW / DCP-L3520CDW / DCP-L3520CDWE / DCP-L3527CDW /
DCP-L3555CDW / DCP-L3560CDW / MFC-L3740CDW / MFC-L3740CDWE /
MFC-L3760CDW / MFC-L8340CDW / MFC-L8390CDW
D027VF001-00
UK
Version 0
NOTE:
The components included in the box may differ depending on your
country.
The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable (DCP-L3555CDW / DCP-L3560CDW /
MFC-L3740CDW / MFC-L3740CDWE / MFC-L3760CDW /
MFC-L8390CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
The illustrations in this show the Quick Setup Guide
MFC-L8390CDW.
Brother aims to reduce waste and save both raw materials and the
energy required to produce them.
Read more about our environmental work at www.brotherearth.com.
Toner Cartridge and Drum
Unit Assemblies*
(Black, Cyan, Magenta, and
Yellow)
Waste Toner Box* Belt Unit*
* Installed in the machine AC Power Cord Quick Setup Guide
Product Safety Guide
Remove all the blue packing tape.
NOTE:
Before connecting the power
cord, locate the Serial
Number label on the back or
side of the machine. Record
this number for Registration
and Warranty support.
Push firmly.
BK
C
M
Y
4Select your country/language
(Initial setup only)
Front
Location of the power button varies depending
on the model. After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.
6Connect the telephone line cord (For MFC models)
If you do not plan to use the fax feature on this machine, go to step .
7Connect your computer or mobile device to your machine
Follow these steps to complete the setup using one of the connection types available on your machine.
Visit setup.brother.com to download and install
Brother software.
Follow the on-screen instructions
and prompts.
setup.brother.com
Setup Finished
You can now print and scan using your machine.
To check for the latest firmware, visit support.brother.com/up7.
Can’t Connect? Check the following:
Restart your wireless access point/
router (if possible).
Disconnect the cable.
Wired network
USB connection
If still not successful, go to .
If still not successful, visit support.brother.com
for FAQs and Troubleshooting.
Restart your machine and
computer, and then go to .
1. Press .Menu
2. Press ▲ or ▼ to display
[Initial Setup], and then
press .OK
For LCD models For Touchscreen models
1. On the machine’s Touchscreen, press
[Settings] [All Settings] [Initial Setup] > > >
[Local Language].
2. Press your language.
3. Press .
5
Select your language (if needed)
3. Press ▲ or ▼ to display
[Local Language], and then press
OK.
4. Press ▲ or ▼ to select your language,
and then press .OK
5. Press .Stop/Exit
(Example for UK)
For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals. © 2023 Brother Industries, Ltd. All rights reserved.
D027VF001-00
Important Notice for Network Security:
The default password to manage this machine’s settings is
located on the back of the machine and marked “ ”. Pwd
We recommend immediately changing the default password
to protect your machine from unauthorised access.
(For Europe)
We can send you a genuine Brother cord free
of charge if you need one. To contact us, visit
www.brother.eu.
Wireless network
8Manual wireless setup (Wireless models)
If the wireless setup is not successful, try to set up the connection manually.
Find your SSID (Network Name) and
Network Key (Password) on your wireless
access point/router and write them in the
table provided below.
SSID
(Network Name)
Network Key
(Password)
If you cannot find this information, ask
your network administrator or wireless
access point/router manufacturer.
For LCD models
Press Menu, and then select
[Network] [WLAN(Wi-Fi)] > >
[Find Network].
Follow the LCD instructions.
For Touchscreen models
Press >
[Find Wi-Fi Network].
Follow the Touchscreen instructions.
Go to to install
software.
SSID: XXXXXXX
Network Key: XXXX
If setup is not successful, restart your
Brother machine and your wireless
access point/router, and repeat .
Select the SSID (Network Name) for your
access point/router and enter the Network
Key (Password).
When the wireless setup is successful,
the Touchscreen/LCD displays
[Connected].
For LCD models
Press and hold ▲/▼ to select one of the
following characters:
0123456789abcdefghijklmnopqrstuvwxy
zABCDEFGHIJKLMNOPQRSTUVWXY
Z(space)!"#$%&'()*+,-./:;<=>?@[\]^_‘{|}~

Especificaciones del producto

Marca: Brother
Categoría: Impresora
Modelo: MFC-L3740CDWE

¿Necesitas ayuda?

Si necesitas ayuda con Brother MFC-L3740CDWE haz una pregunta a continuación y otros usuarios te responderán




Impresora Brother Manuales

Impresora Manuales

Últimos Impresora Manuales