Canon DR-5020 Manual de Usario

Canon Escáner DR-5020

Lee a continuación 📖 el manual en español para Canon DR-5020 (5 páginas) en la categoría Escáner. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/5

Setup Instructions for the Canon DR-5020 and DR-5080C

A. Set Up the Scanner and Driver

The following steps need only be performed once. These steps simply set up the

scanner for use. If the scanner is already installed and working properly, you may skip

this section.

1. Prepare your Canon DR-5020 (black and white model) or DR-5080C (color scanning

model) scanner for use by following the directions in Chapters 1 and 2 of the DR-

5020/5080C Instructions booklet. You will need to provide your own SCSI card and

cable, since these items are not included with the scanner.

2. Turn on the scanner. The power button is located in the lower front left of your

scanner. Note: You must always turn on this scanner before you turn on your

computer, or the computer will not find the scanner.

3. Follow the directions in chapters 1 and 2 of the ISIS/TWAIN Driver Instructions

booklet. This will show you how to install the necessary software drivers for your

Canon DR-5020 or DR-5080C. For updated drivers (in case of problems), please go

to the Canon homepage located at: http://www.usa.canon.com. Under Support,

select Drivers and Downloads. Download and install the appropriate TWAIN driver.

B. Set Up WYNN

The following steps need only be performed once. These steps set up WYNN for you to

use with the Canon DR-5020 or DR-5080C scanner.

1. With the scanner and computer on, launch WYNN.

2. Choose Scanner Selection from the Advanced menu. Verify that the correct

scanner is selected. If not, select it from the list.

• For DR-5020: There should be an entry for "Canon DR-5020." Select that. If it

is not listed, select “Unknown Twain using: Canon DR-5020 TWAIN" or download

the latest Twainscn.ini file from the Freedom Scientific Website

(ftp://ftp.freedomscientific.com/users/hj/private/twainscn.ini).

• For DR-5080C: Select the entry for “Unknown Twain using: Canon DR-5080C

TWAIN."

3. Still in the Scanner Selection dialog, in the TWAIN Properties area, verify that none

of the three check boxes is selected. Then click OK to exit this dialog and save

changes.

4. Choose Scanning Settings from the Settings menu. You will do two things here.

a. Change the Scanning Contrast to “Normal Contrast."

b. Specify whether you are scanning color documents.

• For DR-5020: Verify that the Color Scanning check box is not selected, then

click OK.

• For DR-5080C: If you want to retain color in color pages, select the Color

Scanning checkbox, then click OK. Otherwise, uncheck this item. Note that

color scanning takes significantly longer than black-and-white scanning, so it

is better to leave this item unchecked unless you need color.

5. Save these settings. You must save these scanning settings to make them

available for future sessions. If this will be your primary scanner, you should make

these settings part of the Default settings file. To do this, choose Save Settings

from the Settings menu and choose Default as the settings file name. Answer Yes

when asked whether you want to overwrite the existing file.

Note: If this will not be your primary scanner, you should create a different settings

file that you will load each time you want to use the scanner. In that case, type a

new name, such as Canon DR5020 Scanner, for the settings file. When you are

ready to use the scanner, select Retrieve Settings from the Settings menu and

select that settings file.

C. Activate the Front Panel of the Scanner

If you will always be using WYNN or TestTalker with this scanner, the following steps

need only be performed once. They will activate the front panel of your scanner so you

can use the buttons. If you will be using more than one kind of scanning software with

your Canon high-speed scanner, you may need to follow the steps below when you

switch scanning applications.

1. Turn on the scanner, then the computer, then launch WYNN.

2. Place one page in the document feeder.

3. In WYNN, press the Scan button on the WYNN toolbar. WYNN will scan the front

side of the page, then bring up a dialog box asking what to do next. Choose "Done

Scanning," then let WYNN process the page. Wait until this processing is done

before proceeding to the next step.

4. This first scan creates a file in your Windows directory called Setscan.ini. The file

will be in the C:\WINDOWS directory (in Windows 95, 98, XP, or Me operating

systems) or C:\WINNT directory (in Windows NT or 2000 operating systems). You

can use Windows Explorer to find that file.

If you are unfamiliar with using Windows Explorer to locate files, you can right-click

on the Windows directory and choose Find or Search, then type the filename:

Setscan.ini. When you have found the file, double-click on it to open it with

Notepad, then proceed to the next step.

Note: Depending on your particular Windows settings, the file extension (or even the

entire file) may be hidden. To change this, open Windows Explorer and

choose Folder Options from the Tools menu. Click the View tab and select

Show Hidden Files and Folders (this item might be worded slightly

differently depending on your operating system). In addition, uncheck the

Hide Extensions for Known File Types checkbox (this also might be

worded differently). Click Apply to All Folders and then click OK. Now you

will be able to locate the file following the directions in Step 4.

5. Change the line near the bottom of the file that says "FrontPanel=0" to

"FrontPanel=1", and save the file, then exit Notepad.

D. Configure the Front Panel Buttons

If you are scanning two-sided documents, you can take advantage of the Duplex feature

included in the Canon DR-5020. To do this, you will need to set up the

Simplex/Duplex feature by changing some items on the scanner's front panel.

Note: If you are using the Canon DR-5080C, you cannot use the scanner's Duplex

feature. Instead, you will use WYNN's built-in Duplex feature. Follow the instructions

below only if you have the Canon DR-5020 (the black-and-white model).

1. Press the Simplex/Duplex button to select single-sided scanning (Simplex) or

double-sided scanning (Duplex).

2. Set the other front panel buttons as follows: All other lights on the front panel should

be OFF except for Text, the lights around and immediately below the contrast

adjustment scale, the illuminated page-counting numbers, and the red light in the

middle of the large green button.

Note: On the front panel of your DR-5020, do not use any other buttons except the

ones listed above. If any other lights are on, it is very important to press their

associated buttons until they are off before scanning with WYNN.

Note: Do not change the contrast using the front panel contrast buttons, as this will

be overridden by the scanning contrast specified in WYNN.

Your Canon DR-5020 should now be ready for use!

E. How to Do a Batch Scan Using WYNN

When you do batch scanning, you scan all the pages first, then WYNN processes the

pages in a single operation. This processing may take some time, but it is entirely

automated. This is the ideal way to use WYNN with the Canon DR-5020 and 5080C

scanner.

Especificaciones del producto

Marca:	Canon
Categoría:	Escáner
Modelo:	DR-5020
Color del producto:	Zilver
Material de la carcasa:	Aluminium, Glass
Frecuencia del adaptador de CA:	50/60 Hz
Voltaje de entrada del adaptador de CA:	100 - 240 V
Bluetooth:	Ja
Diagonal de la pantalla:	27 "
Resolución:	5120 x 2880 Pixels
Pantalla táctil:	Nee
Relación de aspecto original:	16:9
Frecuencia del procesador:	4 GHz
Familia de procesadores:	Intel® Core™ i7
informática de 64 bits:	Ja
Número de núcleos de procesador:	4
Estándares wifi:	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Versión Bluetooth:	4.0
Incluye sistema operativo:	Mac OS X 10.10 Yosemite
red LAN:	Ja
Número total de megapíxeles:	- MP
Lector de tarjetas de memoria integrado:	Ja
Tarjetas de memoria compatibles:	SDHC
luz de fondo LED:	Ja
Micrófono, entrada de línea:	Nee
Número de puertos Ethernet LAN (RJ-45):	1
Opción de montaje de bloqueo de cable:	Ja
Tipo de ranura para candado de cable:	Kensington
Altavoces incorporados:	Ja
Salidas de auriculares:	1
Full HD:	Nee
Incluye cable de alimentación:	Ja
tipo HD:	5K Ultra HD
Micrófono incorporado:	Ja
Memoria interna:	16 GB
Medios de almacenamiento:	Fusion Drive
Tipo de memoria interna:	DDR3-SDRAM
Certificados de sostenibilidad:	EPEAT Gold, ENERGY STAR
Cámara integrada:	Ja
Ancho del dispositivo (con soporte):	650 mm
Dispositivo de profundidad (con soporte):	203 mm
Altura del dispositivo (con soporte):	516 mm
Peso (con soporte):	9540 g
Software incluido:	AirDrop, AirPlay, Gatekeeper, iCloud, iCloud Drive, Dashboard, Mission Control, App Nap, Power Nap, iPhoto, iMovie, GarageBand, Pages, Numbers, Keynote, iBooks, Safari, FaceTime, Contacts, Time Machine, Photo Booth, Mac App Store, iTunes, Game Center
Estándar Wi-Fi:	Wi-Fi 5 (802.11ac)
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Tipo de panel:	IPS
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Hilos internos del procesador:	8
Tipo de caché del procesador:	L3
Memoria interna máxima:	32 GB
Capacidad total de almacenamiento:	1000 GB
Tecnología Intel® Hyper Threading (tecnología Intel® HT):	Ja
Tecnología Intel® Turbo Boost:	2.0
Teclado incluido:	Ja
Frecuencia turbo máxima del procesador:	4.4 GHz
Modelo de adaptador de gráficos discretos:	AMD Radeon R9 M290X
Incluye ratón:	Nee
Memoria de velocidad de reloj:	1600 MHz
Diseño de memoria:	2 x 8 GB
Ranuras de memoria:	4
Factor de forma de memoria:	DIMM/SO-DIMM
Número de unidades de almacenamiento instaladas:	1
Altura operativa:	0 - 3048 m
Tipo de memoria gráfica específica:	GDDR5
Memoria gráfica:	2048 GB
El número de discos duros instalados.:	1
Tipo de ranura de memoria:	SO-DIMM
Modo autónomo:	Nee
Wifi.:	Ja
Temperatura de funcionamiento (TT):	10 - 35 °C
Humedad relativa de funcionamiento (VV):	5 - 95 procent
Tipo-producto:	Alles-in-één-pc
Número de puertos Thunderbolt 2:	2
Combinación Mini DisplayPort/Thunderbolt compatible:	Ja