Chauvet Pinspot Bar Manual de Usario
Chauvet
Maquina de efectos
Pinspot Bar
Lee a continuación 📖 el manual en español para Chauvet Pinspot Bar (17 páginas) en la categoría Maquina de efectos. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/17
Pinspot Bar
User Manual
Table of Contents
Pinspot Bar User Manual Rev. 1
TABLE OF CONTENTS
1. Before You Begin ......................................................................................... 1
What Is Included ...................................................................................................... 1
Unpacking Instructions............................................................................................. 1
Claims ............................................................................................................................ 1
Text Conventions ..................................................................................................... 1
Symbols ................................................................................................................... 1
Disclaimer ................................................................................................................ 1
Intellectual Property ................................................................................................. 1
Safety Notes............................................................................................................. 2
2. Introduction................................................................................................... 3
Product Overview..................................................................................................... 3
Product Dimensions................................................................................................. 3
3. Setup.............................................................................................................. 4
AC Power................................................................................................................. 4
Fuse Replacement ......................................................................................................... 4
Mounting .................................................................................................................. 5
Orientation...................................................................................................................... 5
Rigging........................................................................................................................... 5
4. Operation....................................................................................................... 6
Control Panel Operation........................................................................................... 6
Menu Map ................................................................................................................ 6
Configuration (DMX) ................................................................................................ 7
Starting Address............................................................................................................. 7
D-Fi USB Connectivity ................................................................................................... 7
Configuration (D-Fi USB) ............................................................................................... 7
DMX Channel Assignments and Values .................................................................. 8
11Ch............................................................................................................................... 8
6Ch................................................................................................................................. 8
1Ch................................................................................................................................. 8
Configuration (Standalone) ...................................................................................... 9
Automatic Program ........................................................................................................ 9
Auto program speed ....................................................................................................... 9
Sound-Active Program ................................................................................................... 9
Sound sensitivity ............................................................................................................. 9
IRC-6 Infrared Remote Control ................................................................................ 10
IRC-6 Operation............................................................................................................. 10
Master/Slave Mode .................................................................................................. 11
Master/Slave Mode (D-Fi USB)...................................................................................... 11
Slave products: ............................................................................................................... 11
Master product:............................................................................................................... 11
5. Maintenance.................................................................................................. 12
Product Maintenance ............................................................................................... 12
6. Technical Specifications.............................................................................. 13
Returns.............................................................................................................. 14
Contact Us......................................................................................................... 15
Page 1 of 15
Pinspot Bar User Manual Rev. 1
Before You Begin
1. Before You Begin
What Is Included
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and Pinspot Bar are registered trademarks or trademarks of Chauvet &
Sons LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company
and product names and logos referred to herein may be trademarks of their respective companies.
Patent Pending.
• Pinspot Bar
• Power cord
• 2 Omega brackets
• 6x 10° diffusers
• 6x 20° diffusers
• 6x 2700 K CTO filters
• Quick Reference Guide
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
<ENTER> A key to be pressed on the product’s control panel
ON A value to be entered or selected
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Page 2 of 15
Before You Begin
Pinspot Bar User Manual Rev. 1
Safety Notes
• This product is not intended for permanent installation.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• The voltage of the outlet to which you are connecting this product must be within the range
stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the
product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the bracket.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Do not open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If the product is sold to someone else, be sure that they
also receive this document.
Page 3 of 15
Pinspot Bar User Manual Rev. 1
Introduction
2. Introduction
Product Overview
Product Dimensions
DMX
in
Power
out
Microphone
LED
display
Power
in
Safety loop
Menu
buttons
DMX
out
IR
sensor
D-Fi
USB
5 in
131 mm
39.3 in
1000 mm
4.6 in
119 mm
Page 5 of 15
Pinspot Bar User Manual Rev. 1
Setup
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The Pinspot Bar may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for
maintenance and programming.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the
product’s weight. (see the Technical Specifications)
• When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to
reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired
angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Mounting Diagram
Safety cable
(such as CH-05
from Chauvet)
Mounting clamp
(such as CLP-15 from Chauvet) Mounting brackets
(2x)
Product Mounting (3 ways)
# 1 # 2
# 3*
Safety cable
(such as CH-05
from Chauvet)
Mounting clamp
(such as CLP-15 from Chauvet)
Mounting bracket
Mounting
clamp
Mounting
bracket
* The 3rd mounting option is for pipe/base mounting.
Page 6 of 15
Operation
Pinspot Bar User Manual Rev. 1
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Refer to the
Product Overview to see the button locations on the control panel.
Menu Map
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list or increases a selected numeric value
<DOWN> Navigates downwards through the menu list or decreases a selected numeric value
<ENTER> Enables the currently displayed menu or sets a selected value into the selected function
Mode Programming Levels Description
Auto
Program 01–11 Automatic programs
Speed 01–99 Speed for auto programs
Fade YES Auto fade after program
NO
Sound Program 01–10 Sound-active programs
Sens 01–99 Sound sensitivity
Manual
Pod1
000–255 Manually adjust the dimmer per pod or for all
pods
Pod2
Pod3
Pod4
Pod5
Pod6
All pods
Strobe 000–099 Strobe rate
DMX
Address 001–502
Select DMX address
(highest channel restricted to personality chosen)
Channel
1Ch 1-channel DMX mode
6Ch 6-channel DMX mode
11Ch 11-channel DMX mode
Slave
Slave1
Select slave modeSlave2
Slave3
Settings
IR ON Turn infrared on or off
OFF
DMX Fail
Auto Revert to auto mode
Black Blackout
Hold Hold the last DMX signal received
Sound Revert to sound mode
Screen ON Screen display always on
OFF Turn off display after 30 seconds of inactivity
Reset Reset the product to factory default settings
Page 7 of 15
Pinspot Bar User Manual Rev. 1
Operation
Configuration (DMX)
The Pinspot Bar works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product’s channels.
The Pinspot Bar uses up to 11 DMX channels, which defines the highest configurable address as 502.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 1Ch, 6Ch, or 11Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from 001–502.
4. Press <ENTER>.
D-Fi USB Connectivity
The Pinspot Bar is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from
Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-Fi
receiving/transmitting channel, then plug it into the D-Fi USB port.
Once plugged in, the D-Fi USB will take over the product. Wired DMX, manual display control/menu
buttons, and IRC-6 will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 remote control
4. Manual digital display/menu buttons
Configuration (D-Fi USB)
1. Set the DMX personality and DMX address on your product.
2. Use the chart provided to set BOTH:
• the channel, and then
• the Receiving or Transmitting option.
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so
may cause damage to the product.
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
1 2 3 4 T/R
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
1 2 3 4 T/R
Receiving Transmitting
Page 8 of 15
Operation
Pinspot Bar User Manual Rev. 1
DMX Channel Assignments and Values
Pinspot Bar Zones for DMX Control
11Ch
6Ch
1Ch
Channel Function Value Percent/Setting
1 Pod 1 000
255 0–100%
2 Pod 2 000
255 0–100%
3 Pod 3 000
255 0–100%
4 Pod 4 000
255 0–100%
5 Pod 5 000
255 0–100%
6 Pod 6 000
255 0–100%
7 Strobe 000
255 0–100%
8
Auto/Sound programs
(Each auto/sound program
has Fade and Snap
functions)
000
034 No function
035
054 Auto program 1 / Sound 1
055
074 Auto program 2 / Sound 2
075
114 Auto program 3 / Sound 3
115
134 Auto program 4 / Sound 4
135
154 Auto program 5 / Sound 5
155
174 Auto program 6 / Sound 6
175
194 Auto program 7 / Sound 7
195
214 Auto program 8 / Sound 8
215
234 Auto program 9 / Sound 9
235
255 Auto program 10 / Sound 10
9 Auto Speed 000
250 Auto program speed, slow to fast
10 Program mode 000
127 Auto program (Channel 8 will run in auto mode)
128
255
Sound program (Channel 8 will run in sound mode)
11 Fade 000
127 Snap function (Channel 8 will activate snap function)
128
255 Fade function (Channel 8 will activate fade function)
Channel Function Value Percent/Setting
1 Pod 1 000
255 0–100%
2 Pod 2 000
255 0–100%
3 Pod 3 000
255 0–100%
4 Pod 4 000
255 0–100%
5 Pod 5 000
255 0–100%
6 Pod 6 000
015 0–100%
Channel Function Value Percent/Setting
1 All pods 000
255 0–100%
12 3 456
Page 9 of 15
Pinspot Bar User Manual Rev. 1
Operation
Configuration (Standalone)
Set the product in the standalone mode to control without a DMX controller.
Automatic Program
To run a program on the Pinspot Bar, follow the instructions below.
1. Press <MENU> repeatedly until Auto shows on the display.
2. Press <ENTER>.
3. Select Program.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select an automatic program, from 01–11.
6. Press <ENTER>.
Auto program speed
To adjust the auto program speed on the Pinspot Bar, do the following:
1. Press <MENU> repeatedly until Auto shows on the display.
2. Press <ENTER>.
3. Select Speed.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to increase or decrease the program speed, from 01–99.
6. Press <ENTER>. The product will return to the last selected.
Sound-Active Program
To run a sound-active program on the Pinspot Bar, follow the instructions below.
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER>.
3. Select Program.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to select a sound-active program, from 01–10.
6. Press <ENTER>.
Sound sensitivity
To adjust the sound sensitivity on the Pinspot Bar, do the following:
1. Press <MENU> repeatedly until Sound shows on the display.
2. Press <ENTER>.
3. Select Sens.
4. Press <ENTER>.
5. Use <UP> or <DOWN> to increase or decrease the sound sensitivity, from 01–99.
6. Press <ENTER>. The product will return to the last selected mode.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
The product will only respond to low frequencies of music (bass and drums).
Especificaciones del producto
| Marca: | Chauvet |
| Categoría: | Maquina de efectos |
| Modelo: | Pinspot Bar |
¿Necesitas ayuda?
Si necesitas ayuda con Chauvet Pinspot Bar haz una pregunta a continuación y otros usuarios te responderán
Maquina de efectos Chauvet Manuales
3 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
2 Septiembre 2024
Maquina de efectos Manuales
- Maquina de efectos Manta
- Maquina de efectos BeamZ
- Maquina de efectos Velleman
- Maquina de efectos American DJ
- Maquina de efectos Steren
- Maquina de efectos Adj
- Maquina de efectos Behringer
- Maquina de efectos NGS
- Maquina de efectos Valcom
- Maquina de efectos Midas
- Maquina de efectos Elation
- Maquina de efectos QTX
- Maquina de efectos Konig
- Maquina de efectos Valueline
- Maquina de efectos Fredenstein
- Maquina de efectos Max
- Maquina de efectos Showtec
- Maquina de efectos Eurolite
- Maquina de efectos Monoprice
- Maquina de efectos Elysia
- Maquina de efectos HQ Power
- Maquina de efectos Antari
- Maquina de efectos Stairville
- Maquina de efectos Black Lion Audio
- Maquina de efectos Laserworld
- Maquina de efectos Monacor
- Maquina de efectos Martin
- Maquina de efectos Drawmer
- Maquina de efectos ColorKey
- Maquina de efectos JB Systems
- Maquina de efectos Evo-Lite
- Maquina de efectos Blizzard
- Maquina de efectos Hazebase
- Maquina de efectos Cameo
- Maquina de efectos Sagitter
- Maquina de efectos DJPower
- Maquina de efectos Doepfer
- Maquina de efectos Fun Generation
- Maquina de efectos Karma
- Maquina de efectos Lotronic
- Maquina de efectos IMG Stage Line
- Maquina de efectos Lexicon
- Maquina de efectos Futurelight
- Maquina de efectos The Confetti Maker
- Maquina de efectos Eliminator Lighting
- Maquina de efectos BoomTone DJ
- Maquina de efectos Klark Teknik
- Maquina de efectos Lab Gruppen
- Maquina de efectos TCM FX
- Maquina de efectos Magmatic
- Maquina de efectos Technical Pro
- Maquina de efectos Rosco
- Maquina de efectos Showven
Últimos Maquina de efectos Manuales
18 Octubre 2024
10 Octubre 2024
8 Octubre 2024
6 Octubre 2024
3 Octubre 2024
2 Octubre 2024
2 Octubre 2024
1 Octubre 2024
30 Septiembre 2024
29 Septiembre 2024