Chauvet ROGUE R2E Spot Manual de Usario

Chauvet Lámpara ROGUE R2E Spot

Lee a continuación 📖 el manual en español para Chauvet ROGUE R2E Spot (16 páginas) en la categoría Lámpara. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
English EN
Español ES
Français FR
Deutsch DE
Nederlands NL
Quick Reference Guide
Model ID: ROGUER2ESPOT
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
Multi-Language
QUICK REFERENCE GUIDE
Intentionally Left Blank Page
1
EN
QUICK REFERENCE GUIDE
Rogue R2E Spot QRG Rev. 2
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the Rogue R2E Spot.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a parti allation. If this equipment does cular inst cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The luminaire is intended for professional use only.
The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than
44 ft (13.4 m) is not expected.
If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord
exclusively available from the manufacturer or its service agent.
The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or
a similar qualified person.
• CAUTION:
This product’s housing may be roduct in a location with adequate hot when operating. Mount this p
ventilation, at least 20 in (50 cm) from adjacent surfaces.
When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure,
allow the product to fully acclimate to the surrounding environment before connecting it to power.
Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification
of strobe use.
• ALWAYS:
Disconnect from power before cleaning the product or replacing the fuse.
Replace the fuse with the same type and rating.
Use a safety cable when mounting this product overhead.
Connect this product to a grounded and protected circuit.
DO NOT:
Open this product. It contains no user-serviceable parts.
Look at the light source when the product is on.
Leave any flammable material within 3.3 ft (100 cm) of this product while operating or connected to power.
Connect this product to a dimmer or rheostat.
Operate this product if the housing, lenses, or cables appear damaged.
Use for space-heating purposes.
ONLY use the hanging/mounting bracket to carry this product.
The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
In the event of a serious operating problem, stop using immediately.
Connection of the control signal: DMX line
The product has XLR sockets for DMX input and output.
Notice: This control circuit is isolated and belongs to the Class 2 data port.
The control circuit has a cumulative leakage current of less than 3.5 mA.
glish

Especificaciones del producto

Marca: Chauvet
Categoría: Lámpara
Modelo: ROGUE R2E Spot

¿Necesitas ayuda?

Si necesitas ayuda con Chauvet ROGUE R2E Spot haz una pregunta a continuación y otros usuarios te responderán




Lámpara Chauvet Manuales

Lámpara Manuales

Últimos Lámpara Manuales