Chief CMA105 Manual de Usario

Chief soporte de panel plano CMA105

Lee a continuación 📖 el manual en español para Chief CMA105 (7 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

I N S T A L L A T I O N I N S T R U C T I O N S

CMA105

CMA110

CMA115

Ceiling Plates

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

CMA105-110-115

CMA105-110-115 Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively "Milestone"), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS!

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the CMA mount does not exceed

500 lbs (226.8 kg).

NOTE: The weight capacity of the CMA mounts may be

LIMITED to the lowest weight capacity of any other

component located between the ceiling plate and the

projector/display.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

NOTE: CMA105, CMA110, CMA115 are intended to be used

with a 1-1/2" NPT or NPSM following ANSI/ASME

B1.20.1 (Schedule 40, 0.154" minimum thickness

aluminum - ASTM B221) threaded extension column

(not included).

IMPORTANT ! : These CMA mounts are designed to be:

• mounted to a 2" x 6" wood framework ceiling

covered with 5/8" drywall;

• mounted to an 8" concrete ceiling using either

1/4" x 2-1/2" lag bolts for Toggler AF8 anchors

(not included), or 5/16" x 2-1/2" lag bolts for

Fischer UX10 concrete anchors (not included);

• suspended from four 3/8" diameter (minimum)

Grade 2 or better threaded rods with 16 threads

per inch (not included) which are secured to a

framing channel (spanning a maximum of 5 feet

--not included) by Grade 2 or better 3/8" channel

nuts (not included).

NOTE:

These CMA mounts provide vertical adjustments in 3/4"

increments.

NOTE: CMA105, CMA110 and CMA115 may be used with UL

Listed CMA151 1-1/2" to 1" NPT Adapter Accessory.

WARNING: Do NOT attach to vertical mounting surfaces

such as walls or angled ceilings!

--SAVE THESE INSTRUCTIONS--

Installation Instructions CMA105-110-115

DIMENSIONS

.68

17.254

1.50

38.100

3.00

76.200

4.00

101.600

4.00

101.600

1.35

34.163

2.690

68.326

4X .44 X .75 SLOT

[11.2 X 19.0]

1 1/2 NPT

DIMENSIONS: INCHES

[MILLIMETERS]

CMA105

.68

17.254

3.25

82.550

6.50

165.100

8.00

203.200

8.00

203.200

.75

19.050

3.09

78.457

6.19

157.226

.91

22.987