Chief K4G410B Manual de Usario

Chief soporte de panel plano K4G410B

Lee a continuación 📖 el manual en español para Chief K4G410B (20 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

I N S T A L L A T I O N I N S T R U C T I O N S

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

K4G410 K4G510 K4G610

K4G420 K4G520 K4G620

Large Kontour™ Articulating Array Arm Grommet Series

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

K4G4X-5X-6X Series

K4G4X-5X-6X Series Installation Instructions

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness or sufficiency of

the information contained in this document.

Chief® is a registered trademark of Milestone AV Technologies.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided.

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components located on the K4G4X-5X-6X Series mounts

up to (and including) the display does not exceed 15 lbs (6.8

kg) per display.

WARNING: The K4G4X-5X-6X Series mounts were

designed to mount displays between 19-23” in width. Do NOT

install displays smaller than 19" in width or larger than 23" in

width!

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

WARNING: Do not use this product outdoors.

--SAVE THESE INSTRUCTIONS--

Installation Instructions K4G4X-5X-6X Series

DIMENSIONS

K4G410

5.0 MAX

SURFACE DEPTH

18.1 MAX

MONITOR

HEIGHT

7.7

1.0 13.3

VESA 100 X 100, 75 X 75

COMPATIBLE INTERFACE

TILT ADJUSTMENT

COLUMN CENTER TO CENTER

DISTANCE IS DEPENDANT ON

MONITOR WEIGHT AND WIDTH

80.7

3.5

15.6

7.1

12.0 EXTENSION

MINIMUM

K4G510

7.7 5.0 MAX