Chief LSM5364 Manual de Usario

Chief soporte de panel plano LSM5364

Lee a continuación 📖 el manual en español para Chief LSM5364 (1 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

I N S T A L L A T I O N I N S T R U C T I O N S

FHB-3364 / FHB-5364

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of

Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8800-002019 Rev00

a Duchossois Group Company

www.chiefmfg.com

06/09

The FHB hardware kits are designed for use with Chief® Series

Mounts. See the specific installation instructions provided with the

mount for additional installation information.

Unpack and verify kit contents. If any listed parts are missing,

immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO

EQUIPMENT FALLING CAUSING SERIOUS PERSONAL

INJURY AND DAMAGE TO EQUIPMENT! DO NOT substitute

hardware. Use only hardware supplied by manufacturer!

PARTS

WARNING: OVER TIGHTENING OF SCREWS CAN

DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL

INJURY AND DAMAGE TO EQUIPMENT! DO NOT over

tighten screws when installing interface brackets.

NOTE: Properly sized screws will easily and completely thread into

display mounting holes. If spacers are required, be sure to

use longer screws of the same diameter.

NOTE: The provided fasteners should be used with the universal

washer (A) as noted. (See Figure 1)

Figure 1

1. Attach interface brackets to back of display using the provided

hardware, and noting where the centerline of display should be

located against the interface bracket. (See Figure 2)

Figure 2

2. Continue installation following the instructions included with the

mount.

(Qty) Description

A(4) Universal Washer

B(4) Spacer, Nylon, .75 x .26 x .375

C(4) Screw, Phillips Pan Head, M6 x 25mm

D(4) Screw, Phillips Pan Head, M6 x 16mm

A (4)

Universal

Washer

B (4)

.75 x .26 x .375

C (4)

M6 x 25mm D (4)

M6 x 16mm

M4 (not included)

M5 (not included)

Universal

Washer

Centerline

of Display

Especificaciones del producto

Marca:	Chief
Categoría:	soporte de panel plano
Modelo:	LSM5364
Color del producto:	Wit
Ancho:	335 mm
Profundidad:	251 mm
Altura:	52 mm
Peso del embalaje:	490 g
Ancho del embalaje:	345 mm
Empaquetadura en profundidad:	255 mm
Altura del embalaje:	60 mm
Número:	1
Fácil de instalar:	Ja
Tipo-producto:	Bureau-toolbar/rail papierhouder
Formato:	A4
Número de compartimentos:	1
Fácilmente extraíble:	Ja
Adecuado para almacenamiento:	Vel