Chief MSR6000 Manual de Usario

Chief soporte de panel plano MSR6000

Lee a continuación 📖 el manual en español para Chief MSR6000 (7 páginas) en la categoría soporte de panel plano. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

CHIEF MANUFACTURING INC. 8840-000079 RevF

8401 EAGLE CREEK PARKWAY, STE. 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 10/07

I N S T A LL A T IO N IN S T R U C T IO N S

MEDIUM FLAT PANEL DISPLAY STATIC MOUNT

MSR Series

The MSR Series static mount accommodates medium

ﬂat panel displays weighing up to 1 lbs ( kgs).25 57

The teardrop holes in the mount allow for quick

connect/disconnect of the display, thus simplifying

installation and maintenance processes.

The top and bottom mounting brackets are adaptable to

single wood stud mounting or dual wood studs that are

16” on center.

After installing the display on the mount, the screen can

be locked in place using the convenient locking ﬂag.

A padlock can be used on the latching ﬂag for added

security.

The mount is concealed behind the display, making it a

low profile wall mount.

MSR Series

! IMPORTANT: If the installation of this product requires OSHPD seismic approval, refer to OSHPD pre-approval

documents and drawings before beginning installation. OSHPD documents and drawings are available at

www.chiefmfg.com, and located on the product information page for the mount.

BEFORE YOU BEGIN

CAUTION: To prevent damage to your monitor and MSR, which could affect or void the Factory

warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay

particular attention to the Warnings and Cautions in this document.

The mount is designed to be installed using wall studs or supporting framework. The fasteners used to anchor the

mount must be capable of supporting five times the total weight of the equipment.

The maximum weight to be installed on the MSR Series static wall mount is 125 lbs (57 kg).

If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.

Installation Instructions MSR Series

IMPORTANT WARNINGS and CAUTIONS!

WARNING A WARNING alerts you to the possibility of serious injury or death if you do not

follow the instructions.

CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do

not follow the corresponding instructions.

WARNING Improper installation can result in serious personal injury! Make sure that the

structural members can support a redundant weight factor five times the total weight

of the equipment. If not, reinforce the structure before installing the mount.

WARNING Be aware of the potential for personal injury or damage to the equipment if it is not

installed correctly. Consider the weight of the mount without the display.

WARNING The installer is responsible for verifying that the display to which the wall mount is

fastened will safely support the combined load of all attached components or other

equipment.

WARNING The combined weight of the display placed on the wall mount must not exceed 125 lbs

(57 kg), the maximum support weight of the mount.

WARNING Watch for pinch points. Do not put your fingers between movable parts.

WARNING Make sure the flag securing the display is completely lowered at all times except when

removing or installing the display. The flag must be all the way down when

installing/removing cables.

CAUTION Check the unit for shipping damage before you begin the installation.

DIMENSIONAL DRAWING

Installation Instructions MSR Series

CONTENTS

DIMENSIONAL DRAWING ..................................... 2

TOOLS REQUIRED FOR INSTALLATION.............. 3

PARTS LIST .............................................................. 3

MSR INSTALLATION .............................................. 4

Select And Prepare Mounting Location.................... 4

Mount the MSR....................................................... 5

ATTACH MSB TO THE DISPLAY ........................... 6

INSTALL THE DISPLAY.......................................... 6

REMOVE THE DISPLAY.......................................... 6

TOOLS REQUIRED FOR

INSTALLATION

Drill and drill bit set

Wrench set

NOTE: Other tools may be required depending on your

method of installation.

Figure 1. Parts

PARTS LIST

Prior to assembly, unpack the carton completely. Verify

contents listed in Table 1 and Figure 1.

Read installation instructions completely. If you are

missing any of the listed parts, contact Customer Service

at: 1-800/582-6480.

Table 1. Parts List

REF DESCRIPTION QTY

10 MSR-Series Static Mount 1

20 *BOLT, Lag, 5/16” x 2 1/2” 2 or 4

30 *WASHER, 5/16” 2 or 4

**Extender, Latching Flag (not shown) 1

**Screw, Phillips Machine, 10-24 x 1/2”

(not shown)

**Nut, Lock, 10-24 (not shown) 1

** Included in Latching Flag Extension Kit

* Quantity required is dependent upon mounting

configuration chosen during installation. See “MSR

Installation” section of this document to determine

appropriate quantities.

Lag Bolts

Washers

Especificaciones del producto

Marca:	Chief
Categoría:	soporte de panel plano
Modelo:	MSR6000
Color del producto:	Beige, Brown
Peso.:	465 g
Ancho:	114 mm
Profundidad:	92 mm
Altura:	37 mm
Amable:	Luchtkoeler
Nivel de ruido (baja velocidad):	14.8 dB
Nivel de ruido (alta velocidad:	23.6 dB
Número de velocidades:	3
Tipo de embalaje:	Doos
Herramientas de montaje:	Ja
Suministro de red:	2.52 W
Material:	Aluminium, Copper
Flujo de aire:	40.8 m³/uur
numero de fans:	1 ventilator(en)
Abarcando:	12 V
Velocidad de rotación (máx.):	2500 RPM
Tiempo medio entre fallos (MTBF):	150000 uur
Incluyendo tornillos:	Ja
Número de tornillos:	4
Velocidad de rotación (mín.):	600 RPM
Ubicación adecuada:	Processor
Procesadores compatibles:	AMD A
Material básico de la placa:	Koper
Diámetro del ventilador:	92 mm
Número de aspas del ventilador:	9
Zócalos de procesador compatibles:	Socket AM5
Ventilador de alimentos (ancho x fondo x alto):	92 x 92 x 25 mm
Período de garantía:	6 jaar
Material del radiador:	Aluminium
Ancho del radiador:	114 mm
Profundidad del radiador:	92 mm
Altura del radiador:	23 mm
Peso de:	75 g