Chief NS1S2023 Manual de Usario

Lee a continuación 📖 el manual en español para Chief NS1S2023 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
I N S T A L L A T I O N I N S T R U C T I O N S
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief, a products division of Milestone AV Technologies
6436 City West Parkway, Eden Prairie, MN 55344
• P: 800.582.6480 / 952.225.6000 F:877.894.6918 / 952.894.6918
8800-002919 Rev00
©2016 Milestone AV Technologies
www.milestone.com
12/16
NS1S12/20/28/36/41 Side Panels
The NS1S side panels are designed for use with Chief® S1 Series racks. See the specific installation instructions provided with the rack for
additional installation information.
TOOLS REQUIRED / PARTS INCLUDED
WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS
PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installers responsibility to make
sure all components are properly assembled and installed using the instructions provided.
IMPORTANT ! : If installing doors (not included) and side panels on an S1 rack, the doors must be installed before installing
the side panels.
A (1)
[Side panel]
B (4)
5/32" [security]
(included)
1/4-20 x 1-1/4"
C (1)
5/32"
[security]
NS1S Side Panels Installation
1. Align two bottom tabs in side panel (A) with slots in S1 rack. (See
Figure 1)
Figure 1
2. Attach side panel (A) to S1 rack with four 1/4-20 x 1-1/4" security
buttonhead cap screws (B). (See Figure 2)
Figure 2
3. Tighten four screws (B) using the 5/32" security hex wrench (C).
4. Attach additional side panels as required.
®Chief is a registered trademark of Milestone AV Technologies. All rights reserved.
(A)
S1 rack
(NS1S1223 rack shown)
2
(A)
(B) x 4
(NS1S1223 rack shown)

Especificaciones del producto

Marca: Chief
Categoría: No categorizado
Modelo: NS1S2023

¿Necesitas ayuda?

Si necesitas ayuda con Chief NS1S2023 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Chief Manuales

No categorizado Manuales

Últimos No categorizado Manuales