Chief PAC720 Manual de Usario

Lee a continuación 📖 el manual en español para Chief PAC720 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Cart and Stand Clamp Head Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PAC720
Installation Instructions PAC720
3
TOOLS REQUIRED FOR INSTALLATION AND PARTS
3/16"
(Provided)
x1
I/M
B (1)
C (1)
A (1)
E (2)
D (4)
(5/16-18 x 3/4")
F (1)
3/16"
(3/8-16)
PAC720 Installation Instructions
4
ASSEMBLY AND INSTALLATION
WARNING: EXCEEDING MAXIMUM WEIGHT CAPACITY
MAY LEAD TO SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT! It is the installer’s responsibility
to ensure the total amount of weight placed on the cart/stand
does not exceed 200 lbs (90.72 kg) for the PFC, 200 lbs
(90.72 kg) for the PF1, 400 lbs (181.44 kg) for the PF2
[200 lbs (90.72 kg) per faceplate].
Installing Display(s) to Cart/Stand
1. Install display(s) to cart or stand following the installation
instructions included with the cart/stand.
Assembling Faceplate to Bracket
1. Attach faceplate (A) to bracket (B) using two 3/8-16 Nylock
lock nuts (E). (See Figure 1)
Figure 1
2. Secure faceplate with bracket around post to clamp bracket
(C) using four 5/16-18 x 3/4" buttonhead cap screws (D).
NOTE: The faceplate assembly must be attached to the clamp
bracket below the knob on the lower part of the cart/
stand post.
Figure 2
Assembly for Dual Display
WARNING: TIPPING HAZARD! Place PAC720 only on
FRONT of PFC and PF1. PAC720 may be placed on both
FRONT and BACK of PF2.
1. Attach first faceplate (A) to bracket (B) using two 3/8-16
Nylock lock nuts (E). (See Figure 1)
2. Attach second faceplate (A) to bracket (B) using two 3/8-16
Nylock lock nuts (E). (See Figure 3)
Figure 3
3. Secure faceplate assemblies with bracket to clamp brackets
(C) onto cart/stand post using four 5/16-18 x 3/4"
buttonhead cap screws (D) on EACH assembly. (See
Figure 4)
(A)
(B)
(E) x 2
1
(C)
2
(D) x 4
(PFC shown)
PAC720 must be
installed BELOW
the knob located
on the post back.
(A)
(B)
(E) x 2
2

Especificaciones del producto

Marca: Chief
Categoría: No categorizado
Modelo: PAC720

¿Necesitas ayuda?

Si necesitas ayuda con Chief PAC720 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Chief Manuales

No categorizado Manuales

Últimos No categorizado Manuales